CONSTRUCTION BOUNDARY WALL OF BLDG. NO P-57 DS CELL PROVN RCC FRAMED IN PLACE OF COLLAPSED BRICK SECURITY WALL AROUND (DEAL HOUSE), PROVN OF 08 NOS PEDESTAL FAN ENTRY/EXIT POINTS NEAR GATE NO 2, 3, 4 ,5 IN TECHNICAL AREA AT IRDE GE (I) RND DEHRADUN

Amount

Excavating in trenches n exc 1.5 m wide and n exc 1.5 m in depth for foundation, sewage line, manholes n exc 10 sqm on plan and n exc 1.5 m depth and getting out soft/loose soil complete all as specified.

Returning filling in including spreeding, leveling, watering and well ramming in layers n. exc 25 cm thick in soft /loose soil Complete all as specified and directed.

Removal of excavated soil exc 500m not exc 1Km and depositing where directed at a level n.exc 1.5m above the starting point Complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base, foundation, filling, mass concrete complete all as specified and directed.

M&L for RCC M-25 design mix using 20 mm graded stone aggregate as in Beams, cantilevers, bressummers, lintles over 1.5 m span complete all as specified and directed.

M&L for RCC M-25 design mix using 20 mm graded stone aggregate as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L for RCC M-25 design mix using 20 mm graded stone aggregate as in Columns, pillars, piers, posts and struts complete all as specified and directed.

M&L for Brick work with sub class B bricks straight or curved on plan exc 6m mean radius built in CM 1:6 Complete all as Specified and directed.

M&L for brickwork with sub class 'B' bricks of old size, straight or curved on plan exc 6m mean radius, built in CM (1:6) but except bricks complete all as specified and directed.

M&L for use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc

M&L for Use and waste of formwork as in foundation, footings, padestals and in PBs complete complete all as specified and directed.

M&L for Use and waste of formwork as in Columns complete all as specified and directed.

S&F mild steel angle iron in fencing posts, and struts fixed independently without connecting plates, grill etc and cutting to required size and shape, conforming to gde Fe 410-W (Gde E-250) Quality complete all as specified and directed.

M&L for TMT bar 10 mm dia and over cut to length, benet to shape required including cranking bending, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia as in reinforecement Complete all as Specified and directed

M&L for Mild steel bars TMT Bars 5mm dia & over upto & including 10mm dia in stirrups, spacers & binders, cut to length, bent to shape required, including cranking, bending , hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips Complete all as Specified and directed.

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

S&F galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of fencing posts including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins etc complete all as specified and as directed.

S&F concertina coil 2.5 mm dia of core wire in 450 mm circular dia of each coil having a core wire of high carbon spring steel of high tensile strength as per grade of IS-1454(Part-I) with low carbon steel strip punched tape of 19 mm wide, 0.50 mm thick and series of knife edge sharp barb/blades @ 25 mm centre to centre punched all along the length of both sides of strip at regular interval conforming to IS-513 complete all as specified and directed. Note:- Concertina coil having 50 Rounds per 6 RM.

M&L for rendering 15 mm thick on brick wall or concrete surface in cement mortar 1:4 , finished fair and even without using extra cement complete all as specified and diected.

M&L for Preparation of new plastered surfaces of walls and concrete work and applying two coats of cement based paint over a coat of Primer complete all as specified and directed.

Preparation of new steel surface of any description over 10 CM width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zink chrome primer complete all as specified and as directed.

S&F 75mm dia PVC(SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise described and removal of dismantling materials to a distance exceeding 500 M but not exceeding 1000mtr, complete all as specified and directed.

Dismantling barbed wire fixing to any type of fencing posts,and removal of dismantling materials to a distance exceeding 500 M but not exceeding 1000mtr complete all as specified and directed.

Demolition of brick or stone boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone works and precast concrete articles,and removal of demolish materials to a distance exceeding 500 M but not exceeding 1000mtrcomplete all as specified and as directed.

Demolition of cement concrete Reinforced in ground floors and pavings n exc 15 cm thickness (below or above ground level) reinforcement cut as required to facilitate demolition,and removal of demolish materials to a distance exceeding 500 M but not exceeding 1000mtr complete all as specified and as directed.

M&L for point wiring with single core PVC insulated unsheathed 1100 volt grade FRLS-IS 694 cable with multi stranded copper conductor of size 1.5 Sq mm (Nominal area) drawn through and including non metallic rigid PVC conduit medium duty ISI marked not less than 20mm dia, concealed conduit wiring in walls and surface with GI saddles GI screws, rawal plugs in ceiling or roof if not possible including Tee, Junction boxes and provision of flush metal boxes, inner and outer plate suitable for modular switch, socket and fan regulator as per site requirement and drawing continuous earth wire with and including PVC insulated unsheathed 1100 Volts grade FRLS-IS 694 cable with multi stranded copper conductor of size 1.5 Sq mm (Nominal area) and connected to main earth dolly complete all as specified for 5 pin switch socket outlet, 5/6 Amps on independen board complete all as specified and directed. . Make of cable:Polycab/L&T/Gloster, Make of conduit: Finolex/Polycab/Supreme

S&F Modular socket outlet 3 pin 5 Amp modular flush type in switch socket combined complete all as specified and directed. Make -Anchor Penta/SSK/Cona/Legrand/Havells

S&F 400 mm pedestal fan complete all as specified and directed. Make module of USHA MIST AIR ICY equivalent of Bajaj/Crompton/Havells.

M/s MAA SHAKTI CONSTRUCTIONS AND SUPPLIERS

Gupta Brothers

OM TRADERS

M/S Anil kumar

M/S P K ARORA

Gaur Construction Co