Providing & Laying Butuminous Road Resurfacing Work Various Area in a Mandvi Nagar Palika Dist. Surat.

Name of work : Providing & Laying Butuminous Road Resurfacing work

Various Area In a Mandvi Nagar Palika, Dist. Surat

It. Quantities Estimated Rates Unit Total

No. estimated Item of work In figure Amount

but may be Rs. according to

1 Hectr Clearing and grubbing road land including Hectr

uprooting rank vegetation grass bushes, shrubs,

sapling and trees girth up to 300 mm removal of

stumps of trees cut earlier and disposal of

unserviceable materials (A) By manual means in

area of light jungle

2 Cmt Demolition and disposal of unserviceable Cmt

materials with all lead and lift.(i) Lime concrete.

/ Bituminious Work

3 Smt Cutting the existing bitu. road surface to proper Smt

slope and camber for making as base for

resurfacing of road work by the help of Small

Cold milling machine @ Cutting width 1.00 mt.

& depth up to 100.00 mm

4 Smt Cutting the existing bitu. road surface to proper Smt

slope and camber for making as base for

resurfacing of road work by the help of Big Cold

milling machine @ Cutting width 1.20 mt. &

depth up to 230.00 mm

5 Cmt Box cutting the road surface to proper slope and Cmt

camber for making as base fro road work

including removing the excavated stuff and

depositing on the road side slope as deirected up

6 Smt Scarifying gravelled macadam or bitumen Smt

macadam surface 6 cm to 10 cm.depth including

stacking useful materials on road side and

disposing off remaining stuff.

7 Cmt Providing & laying compacted WBM 75 mm Cmt

thick Grade II Single layer as per MORTH

specification using machine crushed M.C. Metal

of size 45 mm to 63mm with using

Cu.m./10 Sq.m. stone screenings 6mm to 10mm

nominal size and binding materials @

0.08Cu.m./10 Sq.m. including spreading in

uniform thickness, watering and consolidation

with vibratory roller etc. complete.

8 Cmt Providing and laying Wet Mix Macadam base Cmt

course as per MORTH specification using

machine crushed B.T. chips as per required

gradation, mixing with required optimum

quantity of water, conveying the mix to site of

work, spreading in to grade and camber with

paver/mechanical means and consolidation each

layer with vibratory roller to aschieve the desired

density including cost of material labour plant

and equipment etc. complete.

9 Smt Providing and applying primer coat with Smt

Bitumen emulsion (RS-I) on prepared surface of

granular base including cleaning of road surface

and spraying primer at the rate of 7.50 kg/

10sqmt using mechanical means as per Technical

Specification Clause 502. (Hincol made only )

(ii) Medium porosity

10 MT Providing & laying bituminious base course 37.5 MT

mm thick compacted in single layer asphalt VG-

10 grade at 1.99 % by weight of mix for mixing

and 2.5kg/10 smt asphalt VG-10 for tack coat &

using B.T. chips of required gradation including

cleaning and heating asphalt, premix material by

drum mix process in proper gradation and laying

with paver finisher including rolling and

consolidation with 8-10 tonne vibratory roller

and providing all material equipment, tools, and

plants, fire wood, oil, kerosene labour charges

etc. complete using contractor's own

machinaries, drum mix plant and paver finisher

11 MT Providing laying and rolling of 50 mm thick MT

bitumenous mecadam with 0.66 cum stone chips

as per gradation per one metric ton using the

asphalt grade (60/70) VG-30 at 34 kg per M.Ton

( i.e. 3.40% ) of total mixing and for tack coat at

the rate of 2.5kg /10 Sqmt on B.T. surfce

including heating and mixing in drum mix plan,

spreading the same with paver finisher and

consolidation with vibratory roller including

necessary firewood, oil, lubricants. labour

charges etc. using contractor's own drum mix

plant and equipment, tool etc completed in

accordance with the requirement of specification.

12 MT Providing and laying 25mm thick compacted MT

semi dense bituminous concrete with B.T.

aggregate as per MORT & H gradation &

specification & Bitumen for tack coat 2.5Kg./10

Sq.m. and mixing asphalt grade (60/70) VG-30

at 50.00Kg./M.T. i.e. 5.00% by weight of total

mix including heating the aggregate and asphalt

by contineous batching of Drum mix plant and

spreading the same by paver finisher and

consolidation with vibrator roller and power

roller including providing all materials,

equipements, tools, and plants oil, kerosene,

firewood, labour charges etc. comp. using

contracter's own machinaries drum mix plant and

paver finisher etc. complete.

13 Smt Painting the BT surface with bitumen of grade Smt

VG-30 (60/70) including cleaning the surface

using wire brushes and air compressor and then

applying the bitumen @ 5.00 kg/10 sqmt with

mechanical sprayer and flushing fine clean sand

@ 0.03 cum/10 sqmt over the asphalt painted

surface including the cost of material,

transportation, royalty charges, heating of

bitumen, hire charges of air compressor, sprayer

and all type of labours & materials etc. complete

as directed by engineer in charge etc. complete.

14 Smt Road marking with hot applied thermoplastic Smt

paints with reflectorising glass beads on bitumin

surface providing and laying a hot applied

thermoplastic compound 2.5 mm thick including

reflectorising glass beads @ 250gms per sqm

area, thickness of 2.5mm is excluding of surface

applied glass beds as per IRC:352015.The

finished surface to be level, uniform and free

from treaks and holes. zebra patta /bump patta

lane/center line/ edge line/cut patta. The white

color marking should provide liminance

coefficinet on cemend road shalll be min

mcd/m2/lux and Asphalt road shall be min

mcd/m2/lux during the service life during the day

time. The marking should meet the performance

criteria for night time reflectivity, wet reflectivity

and skid resistance as mentioned in the section-

15 of IRC 35-2015. Warranty for the Retro

reflectivity should be two years.

15 Nos Supplying and fixing cat eye (Make Stimsonite) Nos

made out from Acrilo beautile sterine injuction

high compressed molding with reflector made of

MMC (prismatic type of size 12cm x 6cm x

2.5cm) provided with bituminous adhesive 100g.

with each unit for fixing. (Engineer grade)

16 Cmt Providing and laying, Stacking, Spreading Cmt

Granular Sub Base Grade I on road side for hard

side shoulder of work as per specification by

providing course graded material conforming to

Table 400-2 of MOST specification of grading

II,using material combination of crushed

aggregate, stone dust etc. as required gradation

including spreading,watering & consolidation by

vibratory roller in grade and camber as directed.

Signature of Bidder Chief Officer

Mandvi Nagar Palika