SPECIAL REPAIR/ RENOVATION OF MAIN GATE AND CERTAIN OTHER SANCTIONED WORKS FOR MISC UNITS UNDER GE (S) BINNAGURI

Amount

Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out in soft/loose soil all as specified and directed.

Returning, filling in including spreading, leveling, watering and well ramming in layers n. exc. 25 cm complete all as specified and directed

Removing of surplus excavated soil to a distance not exc. 50 m and deposited where directed at a level n exc 1.5 m above the starting point all complete all as specified and directed.

M&L for Providing PCC 1:3:6, type C2 (using 40 mm graded stone aggregate) in foundation complete all as specified.

M&L for brick work with old size sub class 'B' bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:4 complete all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc.complete all as specified and as directed.

M&L for RCC (Design Mix) M-25 grade using 20mm graded crushed stone aggregate as in foundations including rafts,footings,foundation Beams,bases of columns etc. and the like complete all as specified and directed.

M&L for RCC (Design Mix) M-25 grade using 20mm graded crushed stone aggregate as in Columns ,Pillars, Piers,Posts and Struts etc. complete all as specified and directed.

Formwork to sides of concrete foundations, footings, bases of columns raft and raft beams sides and soffit of foundation and plinth beam and similar work similar or batte for rough finished surfaces of concrete in flat complete all as specified and directed.

Formwork to sides of pillars post, struts, piers, columns and stanctions square vor rectangular in section and similar works for rough finished surfaces of concrete in flat complete all as specified and directed.

M&L for TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

All as per item No.11 herein before but 5mm dia and over and including 10mm dia in stirrups, spacers and binders.

M&L for mild steel work in ornamental and intricate design framed and hung gate, including pintol Hinges, Stops Hand made sliding Bolts etc, and similar works complete using Fe-290 grade E- 165 complete all as specified and as directed.

M&L rendering 10 mm thick in cm 1:4 on fair faces of brick work or concrete surfaces finishing surfaces even and smooth without using extra cement , complete all as specified and as directed.

M&L for preparation of newly steel and iron surface of any description width or girth exc 10 cm and applying two coats of synthetic enamel paint over a coat of Red Oxide primer complete all as specified and directed.

Demolition of brick masonary work, built in cement mortar or cement lime mortar including all quions, arches, pillars, etc. but excluding precast concrete articles etc. complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

S&F 18-20mm thick granite (of any type) stone slab work (table rubbed and polished) as in cladding, walls, gate pillars, etc including edges grinding,half/full round as required over and including 15mm thick screed bed in cement mortar 1:4, set in white cement with pigment and pointed in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite including rubbing and polishing and making sandwitch moulding to edges complete all as specified and directed.

M & L for glazed ceramic coloured tiles 450 x 350 x 7 mm thick (Ist quality) conforming to IS-13753, as in vertical surface such as skirting/dado set in neat cement slurry and pointed in coloured cement to match the surface, including 10mm thick rendering to receive tiles in CM (1:4) complete all as specified and as directed.(Make- Kajaria / Johnson/ Nitco)

M & L for glazed ceramic coloured tiles 300 x 200 x 6 mm thick (Ist quality) conforming to IS-13753, as in vertical surface such as skirting/dado set in neat cement slurry and pointed in coloured cement to match the surface, including 10mm thick rendering to receive tiles in CM (1:4) complete all as specified and as directed.(Make- Kajaria / Johnson/ Nitco)

S&F of Stainless Steel Letters of 25mm wide Height of letters exc25cm but n.exc 30cm, fixed to granite /Tiled surfaces with suitable arrengement complete all as specified and as directed.

S&F of Mild steel Joist, channel, angle, or tee sections, fixed independently, without connection plate, etc. as in guide channel (cut to ordinary lengths i.e. within 20mm of the length indicated) in grade Fe 410-W (Grade E-250 quality) complete all as specified and directed

M&L for mild steel work in framed and hung gate, including pintol Hinges, Stops Hand made sliding Bolts etc, and similar works complete using Fe-410 -O or Fe-410 -O complete all as specified and as directed.

Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as directed.

M&L for hardcore of broken stone of gauge exceeding 63mm but not exc 100mm, deposited, spread and levelled in layers n.exc 15cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for Providing PCC 1:4:8, type D2 (using 40 mm graded stone aggregate) in foundation complete all as specified and directed.

M&L for 100 mm thick PCC (1:2:4) type B-2 (using 40 mm graded stone aggregate) as in Hard standing laid in alternate bays and finished fair and smooth using extra cement and metal expression while the concrete is green complete all as specified and directed.

M&L for 75mm thick plain cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in plinth protection and footpath finished even and smooth without using extra cement, including making joints to the full depth of PCC at every 3 metres and at every change of direction and filling the same with & including bitumen and sand 1:2 by weight complete all as specified and as directed.

M&L for 60mm thick M-35 grade factory made vibratory compected cement concrete rubber moulded, interlocking paver block any shape and size conforming to IS 15658-2006 with grey cement and pigment as approved laid over and including 25mm thick consolidated sand cushion and joints filled with sand complete all as specified and directed.

M&L for plain cement concrete 1:2:4 Type B 1 (using 20mm graded stone aggregate ) as in drains, surface channels, etc including necessary form work complete all as specified and directed.

M&L for three coats of white wash on newly plastered surfaces of walls including preparation of surfaces complete all as specified and directed.

S & F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S 1161-1979 grade St-240 including painted with one shop coat of zinc chromate prime paint including preparation of surfaces complete all as specified and as directed.

M&L for 75 mm thick PCC (1:4:8) type D-2 (using 40 mm graded stone aggregate) in sub base of flooring. complete all as specified and directed.

M&L for 25 mm thick PCC (1:2:4) type -B0 (using 12.5 mm graded stone aggregate) in sub base of flooring. complete all as specified and directed.

M&L for 25mm thick cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate as in floor,Laid in bays, finished even and smooth using extra cement complete all as specified and directed.

M&L for high tensile 550 MPA yield strength Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering The sheet shall have a hot dip metallic zinc aluminium alloy coating of zinc 43.5%, aluminium (55%)and silicon (1.5%) with total mass coating of 150 gms/sqm on both sides. Covered width will be 1020mm and sheet length as per site requirement. The profile is having return leg for proper side lap. The sheet shall be fixed using self drilling/self capping screws with EDPM seal including taking down of Existing Rain water pipe and refixing after fixing of sheet complete all as specified and directed. Make: TATA blue scope or equivalent of CRIL/METCO.

All as per item No.36 herein before but 0.50mm Plain sheet as in Hips/Ridge/Valley/Cladding etc --- Ditto ---

Excavation in post hole not exceeding 1.5 Mtr wide & upto 2 Mtr deep for pole foundation & getting out in soft loose soil and disposal of surplus soil to a distance n.exc 50 metres and return fill complete all as specified.

M&L for sand filling under floor or in foundations including watering and consolidation complete all as specified and directed.

M & L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but not exc 0.38 (Ist quality ) conforming to IS-13755, as in floor set and jointed in neat cement slurry and pointed in coloured cement to match the surface including 15 mm thick screed bed or bedding layer of cement mortar (1:6) for laying floor finishes complete all as specified and as directed. (Make- Kajaria / Asian/ Nitco)

M & L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exc 0.18 (Ist quality ) conforming to IS-13755, as in floor set and jointed in neat cement slurry and pointed in coloured cement to match the surface including 15 mm thick screed bed or bedding layer of cement mortar (1:6) for laying floor finishes complete all as specified and as directed. (Make- Kajaria / Asian/ Nitco)

M&L for RCC (Design Mix) M-25 grade using 20mm graded crushed stone aggregate as in Beams,Cantilever,Lintel over 1.5 m span etc. complete all as specified and directed.

M&L for RCC ( 1:2:4) (Nominal Mix) Type B1 using 20mm graded crushed stone aggregate as in foundations including rafts,footings,foundation Beams,bases of columns etc. and the like complete all as specified and directed.

M&L for rendering 15mm thick( 10mm backing and 5mm floating coat) in CM 1:4 mixed with integral water proofing compound @ 3% by weight of cement on floating coat as in other than fair faces of brick work or concrete surface of wall and finished surface even and smooth without using extra cement complete all as specified and directed. NOTE: WPC shall be measured and paid separately under respctive Item of schedule.

M&L rendering 15 mm thick in cm 1:6 on other than fair faces of brick work or concrete surfaces finishing surfaces even and smooth without using extra cement , complete all as specified and as directed.

M&L for preparing of newly plastered wall surface and applying two coats of Cement base paint over a coat of cement primer complete all as specified and directed.

Taking down cement plaster of any description on brick or stone walls etc including racking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

M&L for preparing plastered or unplastered old decorated surfaces of wall including cornices etc by brooming down or steel wire brushing ,scrapping down smoke shoot, moulds, mos and efflorescent salts and trading oil and greasy spots,removal of vegetation and applying one coat of white wash on wall surfaces complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan pedestal pattern white including connection in drain and in flushing pipe complete including 'P' or 'S' trap and including plastic water closet seat cover with flat bottom and cover with MS Chromium plated hinge divice ISI marked complete all as specified and directed .

S&F of PVC low level syphonic action flushing cistern of 10 lit capacity including siphon, PVC float with ball valve, rubber cone and flush pipe,Brackets,450 long PVC connection pipe etc complete all as specified and directed( Make- Hindware Sleek/Commander Champion /Parryware slim line )

S&F of pillar taps 15mm bore, fancy type, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe or for brass ferrule complete all as specified and directed.Make : Jaquar CQT 23123 / Marc cat No-8114or equivallent of Zoloto.

S&F bib taps long body cast copper alloy chromium plated with capstan head including cp flanges, screwed down, screwed for iron pipe or for brass ferrule 15mm bore complete all as specified and directed. Make : Jaquar CQT 23047 or equivalent model of Marc/Roca

S&F vitreous china wash hand basin white, flat back of size 550mmx400mm fixed on and including cast iron cantilever bracket 40x40x5mm cutting for and pinning in ends of brackets or errecting stand , 32mm dia CP waste coupling and 32 mm dia PVC waste pipe 450 mm long complete all as specified and directed.

Supply only integral water proofing compound conforming to IS: 2645 - 1975 specification complete all as specified and as directed (Make : CICO No- 1/SIKA/ACCO PROOF).complete all as specified.

S&F of stop valves 15mm bore concealed type cast copper alloy, chromium plated,fancy type with long shank and cup screwed down, screwed both ends for iron pipe or for unions complete all as specified and directed.Make: Jaquar or equivalent in Marc/ Zoloto

S&F 15mm bore Steel water tubing 'medium grade', galvanised with all fittings like elbow, tee, socket, bend etc and fixed to wall, ceiling or laid in floor complete all as specified and directed.

S&F in repair PVC (SWR) floor trap with gratings including jointing with solvent cement of dia 75mm complete all as specified and directed.

M & L applying two coats of colour wash over a coat of white wash on newly plastered surfaces including preparation of surfaces complete all as specified and as directed.

S&F in repair soap dish brass chromium plated Round/oval shaped fixed to wall with PVC gutty and CP screws complete all as specified and directed.Make : Jaquar or equivallent of Marc/Zoloto).

S&F PVC connections 15mm bore size 450mm long of pressure rating 6 kg/sq cm with PTMT nuts complete all as specified and directed.

Supplied & fixed in repair Cast iron nahani trap with grating dia of outlet 100 mm, including jointing to waste pipe in PCC(1:2:4) type B1and making good disturbed surfaces complete all as specified..

S&F in repair 110mm bore, PVC (SWR) pipes, single socket in any length, with rubber ring joints and 50 PVC stack clamp for holding PVC pipe including nuts,bolts etc fixed on walls/Floors including complete all as specified and directed

S&F 110 mm bore PVC (SWR) bends any radius with access door with rubber ring joints complete all as specified and directed

S & F 110 mm dia PVC SWR vent cowl with rubber ring joints complete all as specified and directed.

M&L for Concrete bed to drain pipe (100mm bore) with PCC (1:4:8) type D2 using 40mm graded stone aggregate including packing under and haunching aginnst the sides of pipe after they are laid jointed and tested complete all as specified and as directed.

M&L for salt glazed stone ware drain pipe grade-A, conform to IS-651-1980, 100mm dia laid in trenches and jointed in cement mortar (1:1) complete all as specified and as directed.

S&F of Brass Chromium Plated tubular towel rail 20mm dia, 600mm long between flanges, fancy type, superior quality, fixed with brass screws complete all as specified and directed.

S&F 20mm bore Steel water tubing 'medium grade', galvanised with all fittings like elbow, tee, socket, bend etc and fixed to wall, ceiling or laid in floor complete all as specified and directed.

S&F in repairs health faucet abs body with 08 mm dia, 1.50 mtr long flexible tube & wall hook suitable for 15mm dia pipe complete all as specified and directed. Make Jaguar cat no-ALD-CHR-593N or equivalent of Marc /Roca.

S&F steel ventilator with top hung shutter incl hinges, steel peg stay, with glazing bars , complete all as specified and directed.

M&L for Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-W ( Gde E-250) complete all as specified and as directed.

S&F factory made Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube, supplying and fixing in opening with fittings as per specification & drawing completeall as specified and directed.

S&F Factory made solid PVC moulded door shutter with particle board core, 30 mm thick (stiles) with 2, 4 or 6 raised panel design with 2 mm thick moulded prelam PVC sheet on the front face & 2 mm plain colour PVC sheet on back face complete. all as specified & directed.

S&F stainless steel butt hinges of size 75mm long for fixing of pvc door shutter etc complete all as specified and directed.

S&F 125mm size extruded aluminum alloy handle,cast type, anodised, fixed with screws complete all as specified and directed.

S&F 150mm long aluminum anodized barrel tower bolt of extruded section, fixed with screws complete all as specified and directed.

S&F of 3mm thick plain glass, ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and as directed.

M&L for Concrete bed to drain pipe (200mm bore) with PCC (1:4:8) type D2 using 40mm graded stone aggregate including packing under and haunching aginnst the sides of pipe after they are laid jointed and tested complete all as specified and as directed.

S&F of factory made manhole cover of M-25 grade concrete (Design Mix) 500 to 550mm dia including frame/ring beam set and jointed complete.

M&L 200mm bore reinforced concrete pipes, class NP2, laid and jointed with collars complete all as specified and directed.

M&L point wiring complete for one switch socket point controlled by one, one way switch with FRLSH PVC insulated unsheathed multistranded copper conductor of size 2.50 sqmm nominal cross sectional area single core drawn in and including 20mm dia 'heavy grade' PVC concealed conduits and fittings, including cutting chasing/making hole in brick wall n.exc 10cm width or girth(excluding ceiling surface), pressed steel concealed terminal switch boxes not less than 1.22 mm thick of reqd size factory made duly painted inside and outside with two coats of black bituminous paint over one coat red oxide primer, 3mm thick plastic laminated sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers complete including 2.50 sqmm nominal cross sectional area PVC insulated unsheathed multistranded copper conductor green as earth wire connected to earth dolly with all accessories including making good disturbed surfaces with PCC(1:3:6)/CM(1:4) with treating the surfaces as per existing finishes complete all as specified and directed.

Supply, installation, commissioning of water cooler partially stainless steel ,electric driven single phase having approx storage and nominal cooling capacity of 60/120 ltr including necessary civil works for installation of Water coolers all as specified and directed by Engr-in-charge. (Make: USHA / VOLTAS / BLUE STAR)

Supply, installation of Voltage stabilizer for automatic operation, single phase naturally air cooled indoor wall mounted type fully elecronic controlled & designed for input variation between 170V to 250V with output voltage stabilized at 230V with accuracy of ± 2.5 % and of capacity 4 KVA. (Make: V Guard/Voltamp/AE/ANDREW YUEL).

S&F switch socket out let multipurpose type, 2 in 1 for 6 pin 6 and 16 amp flush type complete all as specified & directed.

S&F 15 mm bore steel water tubes, medium grade, galvanised with all fitings and fixed to wall, complete all as specified and directed.

S&F of stop valves 15mm bore concealed type cast copper alloy, chromium plated,fancy type with long shank and cup screwed down, screwed both ends for iron pipe or for unions complete all as specified and directed.Make: Jaquar or equivalent in Marc/ Zoloto

S&F sub main wiring with two single core FRLS PVC insulated unsheathed multistranded copper conductor conforming to IS 694 of size 1.5 sqmm nominal cross sectional area,1100 v grade and one run of 1.5 sqmm nominal cross sectional area FRLS PVC insulated unsheathed multistranded copper conductor green colour as continuous earth wire drawn in and including 25mm dia 'medium grade' PVC concealed conduits and fittings,complete including taking down of old sub main wiring all as specified and directed. NOTE:- One unit length shall measured as two run of main wire and one run of conduit & earth wire.

S&F in repair post top luminiare suitable for gate light suitable for LED lamp 1x40 watt ,made of die cast Aluminium with Acrylic decorative diffuser, IP-65 protection, and provision of PVC insulated sheathed round flexible wire with multi stranded copper conductor of size 2.50 Sq mm two core complete all as specified and directed Make : Crompton greaves NEBULA cat part No.LPTM-40 CDL or equivalent of Philips/Bajaj.

S&Fof High Power LED flood light fitting 60 Watt, Complies to IEC 60598 and IS 10322 with deep drawn aluminium Pressure die cast housing ,toughened glass cover with IP-66,CL-I protection,Integral electronic driver,Heat sink,Cast Aluminium pipe mounting attachment complete with LED lights, mounted on existing GI bracket and connecting the flood light fitting using 2.5 Sqmm PVC insulated three core copper cable including taking down & depositing existing light fittings all as specified and directed. (Make:- BAJAJ /PHILLIPS/ WIPRO/GE)

S&F of sheet metal enclosure of epoxy powder coated, factory made for MCB's 240 volt 2 way single pole and neutral single door on wall with and including suitable flat iron clamps duly grouted/fixed flush in the wall using suitable lugs & glands complete all as specified and directed.

S&F of MCB single pole 6 to 32 amps, 240 volts, 'C' series, 10 KA breaking capacity & making connection complete all as specified and directed.

SCHEDULE OF CREDIT Rate quoted by the Tenderer for this schedule should not be less than rate assessed by the department shown on estimated rate column for the respective items,any lower rate qouted by the Tenderer will not be cosidered and total amount under col No 53 will be adjusted accordingly cosidering rate inserted by the MES.

Old unserviceable iron scrap of any type obtained from dismantling.

Old unserviceable Brick bats obtained from dismantling.

Old unserviceable MCB"s, any type/size obtained from dismantling.

Old unserviceable Main switches/MCB DB"s, any type/size obtained from dismantling.

Old unserviceable Sub Main wiring materials including iron mongery obtained from dismantling.

Old unserviceable Light fittings of any type obtained from dismantling.

M/S VIRENDRA KUMAR SINGH

M/S SARKAR BROTHERS

L. B. SHARMA

M/S East India Traders

S.N. GHOSH AND CO.