Construction of Seed Godown and Processing Unit at ARS, Ragolu, Srikakulam(Dt)

Construction of Seed Godown and Processing Unit at ARS, Ragolu.

Earth work excavation for foundations (Manual Means) of buildings, septic tank, sump, compound wall in ordinary soils and depositing on bank with an initial lead of 10m and depth up to 3m including all operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., and complete for finished item of work excluding dewatering charges etc., as per SS 20 B(APSS 308)

Filling with STONE crusher DUST finer than 3 mm with not more than 10% passing 0.075 sieve in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all operational,incidental ,labour charges,hire charges of T&P etc., and complete for fnished item of work(APSS NO.309&310)

Plain Cement Concrete corresponding to 1:4:8 prop as per IS 456 equivalent to 1:4:8 (cement: fine aggregate: Coarse aggregate) proportion nominal mix for foundations and under flooring bed using 40mm Hard, machine crushed granite from approved quarry using concrete mixer 10/7 cft (0.2/0.8cum) capacity including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including sales & other taxes on all materials and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level, curing concrete etc., and complete for finished item of work. (APSS No. 402)

Footings: VRCC Nominal mix ( 1:1.5:3) (Cement:fine aggregate: coarse aggregate) (using 400kgs of cement) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including Adjustable Jack screw Props and Acro span Hire Charges For Centering & Scaffolding including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, and excluding seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete including Hire Charges For Centering & Scaffolding but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)

Pedestals: VRCC Nominal mix ( 1:1.5:3) (Cement:fine aggregate: coarse aggregate) (using 400kgs of cement) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including Adjustable Jack screw Props and Acro span Hire Charges For Centering & Scaffolding including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, and excluding seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete including Hire Charges For Centering & Scaffolding but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)

Rat proof projection slab 100mm thick: VRCC Nominal mix ( 1:1.5:3) (Cement:fine aggregate: coarse aggregate) (using 400kgs of cement) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including Adjustable Jack screw Props and Acro span Hire Charges For Centering & Scaffolding including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, and excluding seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete including Hire Charges For Centering & Scaffolding but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)

Plinth beam: VRCC Nominal mix ( 1:1.5:3) (Cement:fine aggregate: coarse aggregate) (using 400kgs of cement) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including Adjustable Jack screw Props and Acro span Hire Charges For Centering & Scaffolding including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, and excluding seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete including Hire Charges For Centering & Scaffolding but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)

Coloumns: VRCC Nominal mix ( 1:1.5:3) (Cement:fine aggregate: coarse aggregate) (using 400kgs of cement) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including Adjustable Jack screw Props and Acro span Hire Charges For Centering & Scaffolding including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, and excluding seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete including Hire Charges For Centering & Scaffolding but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)

Lintel : VRCC Nominal mix ( 1:1.5:3) (Cement:fine aggregate: coarse aggregate) (using 400kgs of cement) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including Adjustable Jack screw Props and Acro span Hire Charges For Centering & Scaffolding including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, and excluding seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete including Hire Charges For Centering & Scaffolding but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)

Sunshades : VRCC Nominal mix ( 1:1.5:3) (Cement:fine aggregate: coarse aggregate) (using 400kgs of cement) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including Adjustable Jack screw Props and Acro span Hire Charges For Centering & Scaffolding including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, and excluding seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete including Hire Charges For Centering & Scaffolding but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)

Roof Beams: VRCC Nominal mix ( 1:1.5:3) (Cement:fine aggregate: coarse aggregate) (using 400kgs of cement) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including Adjustable Jack screw Props and Acro span Hire Charges For Centering & Scaffolding including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, and excluding seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete including Hire Charges For Centering & Scaffolding but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)

Roof Slab 150mm thick: VRCC Nominal mix ( 1:1.5:3) (Cement:fine aggregate: coarse aggregate) (using 400kgs of cement) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including Adjustable Jack screw Props and Acro span Hire Charges For Centering & Scaffolding including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, and excluding seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete including Hire Charges For Centering & Scaffolding but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)

ProvidingThermo Mechanically Treated (TMT) Bars Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc. ,and complete for finished item of work.( APSS No.126)

Providing impervious coat to exposed RCC roof slab surfaces to required slopes with CM (1:3) prop. using screened sand 20mm thick (average) mixed with integral cement water proofing liquid confirming to IS: 2645-2003 manufactured by reputed manufacturers as approved by Engineer-in-charge at 200ml per one bag of cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm including cost and conveyance of all materials like cement, sand, water proofing compound, water etc., to site, operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing including rounding off junctions of wall and slab etc., and complete for finished item of work. (APSS No. 901 & 903).

Ornamental plastering to ceiling 12 mm thick in single coat in CM (1:3) including cost and conveyance of all materials like cement, sand, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting Grooves as directed by Engineer - in - charge etc., complete for RCC exposed faces for finished item of work. (SS 901,903 & 904)

For Basement: Fly Ash Brick Masonry work in Cement Mortar (1:6) prop (Cement : Sand) in superstructure with Flyash cement / lime solid blocks of size 290mmx200mmx140mm from approved source having minimum crushing strength of 50 Kgs/ sq.cm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, etc., complete for finished item of work. (APSS No. 501 & 504).

For superstructure : Fly Ash Brick Masonry work in Cement Mortar (1:6) prop (Cement : Sand) in superstructure with Flyash cement / lime solid blocks of size 290mmx200mmx140mm from approved source having minimum crushing strength of 50 Kgs/ sq.cm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, etc., complete for finished item of work. (APSS No. 501 & 504).

Filling with useful available excavated earth (excluding rock) with a lead of 50 m in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, watering and ramming including cost and conveyance of water to work site and all operaitonal, incidental, labour charges, hire charges of T&P etc., and complete for fnished item of work (APSS NO.309&310)

Filling with Carted Gravel with a lead of 50 m in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T&P etc., and complete for fnished item of work (APSS NO.309&310)

Plastering 12mm thick single coat in CM(1:5) using screened sand including cost and conveyance of all materials like cement, sand, water etc., to site and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., and complete for finished item of work.(SS 901,903 & 904)

Plastering 20 mm thick single coat in CM 1:5 using screened sand including cost and conveyance of all materials like cement, sand, water etc., to site and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., and complete for finished item of work.(SS 901,903 & 904)

Supply and fixing of Galvanized powder coated Casement Windows with openable shutters duly manufactured using pressed steel sections in mild steel conforming to IS 513 of having 1.0 mm thick and galvanized as per IS 277 of 120 GSM surface treatment with pure polyester powder coating of 30-40 microns thick and section for outer frame of 88x50mm, centre for mullion of 62x88 mm, section for glass and fly-proof mesh shutter of 52 x 22 mm, outer frame and mullions to have two sides rebate for glazed shutter of size 24 mm and 10x10 mm square guard bars provided at 125 mm c/c the sections assembled with bolt & nut assembly with zinc-electroplated M-5 bolts, Gl Handle of size 80 mm x 15 mm -1 No per shutter, 2 Nos of stainless steel heavy duty pivot hinges of size 3" of SS 304 Grade per shutter, window panes with 5 mm thick plain float glass and fixed with glass beading section of 10x12 mm size with 0.8 mm thick powder coated aluminium 'U' channel and fly-proof mesh of SS 304 grade fixed with 18 mm x 12 mm BT wood beading and window frames fixing arrangement to the concrete/masonry wall with self expanding screws, complete for finished item of work - 1220 x 1372 or below size

Supplying and fixing of Fixed Louvered Ventilators made of pre - painted steel (base steel as per IS 513 of -0.58 mm thick 'D" quality, galvanized as per IS 277 with zinc of 120 GSM) primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer, The section for louvered ventilators should be of of 33 x 56 mm Box section paneled with 4 mm pinhead glass with Ethyl propylene Diamine monomer Gasket (EPDM) and the sections cut to length mitre joined with corner bracket. corner brackets made of CRCA with Zinc Phosphate. The frames to be fixed to the concrete masonry wall by means of self expanding screws including 10 mm square guard bars with 6" pitch complete for finished item of work Ventilators: Fixed louvers 2'-0" x 2'-0" (609.6x609.6mm)(Box section) outer frame section size of 33 x 56 mm BMT-P.13

Supply & fixing of Rolling shutter made of 80 x 1.25 mm machine rolled CRCA laths, interlocked together through their entire length and jointed together at the ends by end-locks, mounted on specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside & outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., complete for finished item of work as per special spn: 1108

Providing (VDF) ( Vaccum dewateredFlooring ) of 100mm thick laid in panel of size 4mx6m as per (internal floor area ) (1:1.5:3) prop nominal mix for using 6mm to 20 mm size SS5 graded machine crushed hard blsted granite metal including cost and conveyance of all materials like cement, fine , courseaggregate etc., to site and excluding cost of seigniorage charges, and including machine mixing, centring charges, laying concrete, vibrating lift charges, cutting grooves by saw and filling grooves with polysulphide solution etc., complete finished item of work as directed by the department ( including labour charges for finishing CC flooring with vaccum dewatering process as per standard specification as directed by the department).

Providing Indian standard MS Sections of all diameters as per IS-1161, mild steel pipes of different diameters, cutting and bending to required size and shapes, placing and in position as per approved designs including cost and conveyance of all mild steel tubes and sections and wastages such as overlaps, coupling, welded joints etc., and all operational incidential, labour charges for fabrication steel works like trusses, purlins including cost of welding rods, power charges cost of fixing in position, transportation charges, scaffolding for erection purpose etc., complete for finished item of work. A) Truss made of MS circular hollow 50mm pipe as main members for outerframe and MS circular hollow 40mm pipe for vertical and inclined internal members B) MS pipes of box sections 40mm x 40mm x 3.6mm for purlins

Supplying and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: Regular Modified Polyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length: Maximum 12 Meters with Regular Range Colours fixed with 14 mm dia self drilling screws with neoprene washes & including a coat of approved steel primer and two coats of approved paint on over lapping of sheets complete (up to a pitch of 600) etc., complete, excluding the cost of purlins, rafters, trusses including cost and conveyance of all materials, labour charges, overheads and contractors profit etc., complete for finished item of work in all floors.

Painting to new walls with one coat water based cement primer of Interior grade I and two coats of Acrylic emulsion paint interior grade having VOC (VoIatiIe Organic Compound) content Iessthan 50grams/Iiter for internal walls including cost and conveyance of all materials to site, incidental, operational and all labour charges etc., and complete for finished item of work in all floors. (INTERNAL WALLS)

Painting to new walls with 2 coats of acrylic emulsion paint of approved brand and shade over a base coat of approved cement primer exterior grade 2 making making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 912 for external walls for:-External Colouring - acrylic emulsion paint - 3 Coats

Painting to new iron works with 2 coats of synthetic enamel paint of approved brand and shade over 1 coat of red oxide primer of approved brand to give an even shade after thoroughly cleaning and sand papering the surface to remove all dirt and remains , including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work for:-Painting to Iron work - Synthetic enamel paint to New Iron Work - 2 coats + 1 coat Iron primer

Electrical Items

Supply and Fixing of ISI 25mm dia 1.8mm thick surface medium grade with IS:9537 part 3 FRLS regid P.V.C. pipe with all accessories fixing on chromium plated metallic base saddles including all labour charges etc., complete for run of mains. Makes: Precision/Universal& Marudhar/VIP/ GoldMedal / Million plast / GM / Sudhakar/Polycab /Anchor/ Polyline/ Orbit /AKG /Beljin /Vasavi /DEC/MODI’S.

Wiring with run of 2 of 14/0.3mm (1.0 Sqmm) FRLS-H / HFFR / ZHFR PVC insulated 1100V grade as per IS:694/1990 specification copper cable in existing pipe including supply and fixing of Ceiling rose and 6A ISI mark Modular type switch on suitable size hot dip galavanized metal box with cover frame including cost and conveyance of all material and all labour charges etc., complete for light, fan and exhaust fan points in Non Residential Buildings complete for finished item of work. Makes: Finolex / RR kabel / Havells/Finecab/ KEI/Polycab/Gloster/Goldmedal/GM/ Fortune Arrt/Anchor/Million/ APAR(Anushakthi) /Sudhakar /Orbit/Batra Henlay Accessories Makes: Legrand (Myrius/Lyncus) / Schneider (Clipsal X/Livia AB)/ Crabtree (Murano/Athena)/Lauritz Knudsen englaze (formerly L&T))/ GM-(Four-Five)/ Goldmedal (GIFA)/North-West(Artisa)/Million (M VEE)/ Anchor Roma (PLUS)/ Precision(Series 7)/ Honeywell (Blenze pro)/Indoasian(Shynora)

Wiring with run of 3 of 14/0.3mm (1.0 Sqmm) FRLS-H / HFFR / ZHFR PVC insulated 1100V grade as per IS:694/1990 specification copper cable in existing pipe including supply and fixing of Ceiling rose and 6A ISI mark Modular type switch on suitable size hot dip galavanized metal box with cover frame including cost and conveyance of all material and all labour charges etc., complete for light, fan and exhaust fan points in Non Residential Buildings Makes: Finolex / RR kabel / Havells/Finecab/ KEI/Polycab/Gloster/Goldmedal/GM/ Fortune Arrt/Anchor/Million/ APAR(Anushakthi) /Sudhakar/Orbit/Batra Henlay Accessories Makes: Legrand (Myrius/Lyncus) / Schneider (Clipsal X/Livia AB)/ Crabtree (Murano/Athena)/Lauritz Knudsen englaze (formerly L&T))/ GM-(Four-Five)/ Goldmedal (GIFA)/North-West(Artisa)/Million (M VEE)/Anchor Roma (PLUS)/ Precision (Series 7)/Honeywell(Blenze pro)/Indoasian(Shynora)

Supply of 2 Module Modular type, electronic step type Fan Regulator ISI marked complete for finished item of work. Makes: Legrand (Myrius/Lyncus) / Schneider (Clipsal X/ Livia AB)/ Crabtree (Murano/ Athena)/Lauritz Knudsen englaze (formerly L&T))/ GM-(Four-Five)/ Goldmedal (GIFA)/North-West(Artisa)/Million (M VEE)/Anchor Roma (PLUS)/ Precision(Series 7)/Honeywell(Blenze pro)/Indoasian(Shynora)

Supply and fixing of 6A 3pin wall plug socket with 6A MODULAR switch control on a common switch board with earth continuity including wire leads, connections along with all labour charges etc., complete for finished item of work. Makes: Legrand (Myrius/Lyncus) / Schneider (Clipsal X/ Livia AB)/ Crabtree (Murano/ Athena)/Lauritz Knudsen englaze (formerly L&T))/ GM-(Four-Five)/ Goldmedal (GIFA)/North-West(Artisa)/Million (M VEE)/Anchor Roma (PLUS)/ Precision(Series 7)/Honeywell(Blenze pro)/Indoasian(Shynora)

Supply and fixing of 16A 3pin wall plug socket with 16A MODULAR switch control with suitable metalic gang box with earth continuity including wire leads, connections along with all labour charges etc., complete for finished item of work. Makes: Legrand (Myrius/Lyncus) / Schneider (Clipsal X/ Livia AB)/ Crabtree (Murano/ Athena)/Lauritz Knudsen englaze (formerly L&T))/ GM-(Four-Five)/ Goldmedal (GIFA)/North-West(Artisa)/Million (M VEE)/Anchor Roma (PLUS)/ Precision(Series 7)/Honeywell(Blenze pro)/Indoasian(Shynora)

supply and run of 3 of 36/0.3mm (2.5 sq mm) PVC FRLS/HFFR/ZHFR/ P.V.C. 1100V Grade as per IS 694/1990 insulated unsheathed) flexible copper cable in the existing pipe for run of mains including for earth continuty all labour charges connections etc., complete as directed by the department of Makes: Finolex / RR kabel / Havells/Finecab/ KEI/Polycab/Gloster/Goldmedal/GM/ Fortune Arrt/Anchor/Million/ APAR(Anushakthi) /Sudhakar /Orbit/Batra Henlay

supply and run of 3 of 54/0.3mm (4.0 sq mm) PVC FRLS/HFFR/ZHFR/ P.V.C. 1100V Grade as per IS 694/1990 insulated unsheathed) flexible copper cable in the existing pipe for run of mains including for earth continuty all labour charges connections etc., complete as directed by the department of Makes: Finolex / RR kabel / Havells/Finecab/ KEI/Polycab/Gloster/Goldmedal/GM/ Fortune Arrt/Anchor/Million/ APAR(Anushakthi) /Sudhakar /Orbit/Batra Henlay

Supply and fixing of 20-24W, not less than 1100mm length LED batten lightwith extruded alluminium housing andpolycarbonate cover, input voltageAC 220 - 260 Volts with PF>0.9,Surge protection: 2KV,THD<15%,with inbuilt driver and frosted cover CCT: 3000K - 5700K, minimum CRI>70, .etc.,complete for finished item of work. a) LUMINAIRE MAKE : Phillips / GE- Venture / Crompton / Wipro / Bajaj / Havells / Halonix /Jaquar /HPL/GM / GreenLites / Gold Medal/Eveready/hino/ Panasonic/ Ecolink/Capart. b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG/ Everlight.

Supply and fixing of 48" (1200mm) Sweep decorative Ceiling Fan, with double ball bearings with all accessories without Regulator including wire connection and labour charges etc complete for finished item of work. Makes: Crompton (HS Decora/Aura) / Bajaj Regal Star / Havells Festiva / Orient Ornamental Shine /Halonix(Halo) /Polycab(Aerobliss)/G.M. (Air Wave Premium) /Goldmedal(Flora)/RJP(Aroma Super)/ Million ( Max400Deco).

Supply and transportation of and fixing of 30WLED Street light Luminaire made of pressure diecast aluminum body with powder coated, having protective toughened glass, supply input voltage 120 - 270V AC, P.F > 0.90, high power LEDs having System Efficacy >= 120 lumens/watt and junction temperature < 70°C, with Ingress protection IP66, Luminaire performance complies to IS 10322 (Part 5/Sec-3), driver surge protection 4KV, in house additional Surge protection 10 KV with optics distribution, THD<10% at 110 Volts AC, driver efficiency >90%, CCT: 3000K - 5700K, minimum CRI>70, etc., complete with earth connection and not less than two years warranty. , with necessary wire connection including all labour charges fixing as directed by the department etc., complete a) LUMINAIRE MAKE : Wipro(Skyline) / Philips (Green line) / GE-Venture / Crompton(Neo Series) / Bajaj Edge) / Halonix(Lumos - Super) / Havells (Endura Series)/Valmont(Supernova) /Capart (Premium) /Greenlites(Hi-Lux) /Polycab /Keselec/ HPL(City Vision)/ Jaquar(Premium) /Eveready/ Surya (Lexon) /FortuneArrt (Leaf) / Rhino (GPSL04)/ Orient(Fiest Plus) /Bee-lite (Gritty)/Ecolink(Durastreet Gen II) b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA /OSRAM / SAMSUNG / LG

S/F of 4 way Horizantal TPN DB's with IP-43 protection of suitable for accomodating 63 A FP 100 mA RCBO as incomer with 12 nos 6 to 32 A SPMCB's as outgoings as per IS 8623; IS 13032; IEC 61439-3. including internal connections etc.,complete for surface Makes: Legrand (Ekinox 3) / Schneider-A9/Hager Novello+/ Seimens/Havells STADx/ Lauritz Knudsen (formerly L&T) -Newrange/Indo Asian-Opti Pro/ HPL (Techno)/ Anchor (Uno Plus)/ABB-ITUS MCB make: Legrand-DX3 / Schneider-A9/Hager-h3/ Siemens-5SX4/ Havells STADx / Lauritz Knudsen (formerly L&T)-AU/Indo Asian-Opti pro/ HPL (Techno)/Anchor (Uno Plus)/ABB-SB200

Supply and fixing of lightning protective system conforming to IS : 2309 with all standard accessories such as metal globe finials on the top of the builiding with 25.4 mm dia 1.0mtrs. Length of copper pipe etc., complete without down conductors and earthing complete for finished item of work.

Supply and fixing of 100A Porcelain Rewirable Fuse Units with neutral link on suitable T.W wooden peeta including all accessories and labour charges etc complete for finished item of work. Makes: C&S/Standard/HPL/ Sputnik / Million / Gold Medal /GM/ Benlo/Anchor

Supply and laying of 25mm x 3mm GI Flat (0.656 Kgs/Mtr) Earth wire/Strip in horizontal /Vertical run in Ground/surface/Recess including, riveting, soldering, saddles, making connection etc as required complete for finished item of work.

Supply and Transportation of 25 Sqmm 3.5 Core XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I) Makes: Torent / Universal / Unicab / Havells /Finecab / KEI / Gloster/ Polycab /RR Kabel/ Fortune Arrt /KEC Asian Cables/Orbit/Avocab /Gemscab/Batra Henlay.

Earth work excavation of Trench in hard ground soil, laying of U.G cables upto 50sqmm on sand cushion covering the cable with bricks and back filling of Trench duly providing route indicator embedded in C.C including cost and conveyance of materials and labour charges etc., complete for finished item of work.

Supply and laying of 8 SWG Copper wire(0.1155Kgs/1Mtr) Earth wire/Strip in horizontal /Vertical run in Ground/surface/Recess including, revitting, soldering, saddles, making connection etc as required complete for finished item of work.

Providing independent earthing by excavating a trench to a deapth of 2.1m in all soils, as per size specified in the data using 40mm dia b-Class GI pipe of 2.5mtrs length with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of slat and charcoal in layers and all labour charegs etc., complete. for small quarters complete for finished item of work.