Repair to Bridge of Local nallah at 6th km on Telipada to Suhagpur road_Road_Mastic asphalt -wearing coat- Boulder pitching, Pot hole repair in approch road, Railing repairing and Painting etc_At 6.000 km

Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per direction of Engineer in charge.

Painting two coats over a coat on concrete surface with Synthetic Enamel paint of approved brand and shade to unplastered concrete surfaces etc. complete as per specification & direction of Engineer-in Charge.

Construction of RCC guard posts of 200 mm dia M15 grade cast-in-situ with 20 mm nominal size aggregate, true to line and grade, tolerance of vertical RCC posts not to exceed 1 in 500 as per drawing and as per the direction of the Engineer-in-charge.

Construction of shoulder with approved meterials like moorum obtained from locality with all lift and leads transporting to the site ,spreading,greading to required slope and compacting tomeet requirement of table 300.2 with all lead and lift as per direction of Engineer In Charge.

Providing & laying of wearing course of 56mm thick consisting of 6mm thick mastic asphalt and 50 mm thick asphaltic concrete on top of the Deck slab. The mastic asphalt shall be of paving grade bitumen meeting the requirement given in the table 500-39, prepared by using mastic cooker and laid to required level & slope after cleaning the surface, applying prime coat including providing antiskid surface with bitumen precoated fine grained hard stone chipping of all complete as per clause 501, 502,503 & 516 of MoRT&H Specification for road & bridge work (5th revision), followed by asphaltic concrete to be laid in two layers of 25mm thick each etc complete as per approved drawing & technical specification Clause No 503 & 507 of MoRT&H specifications for road & Bridge work (5th revision) and as per direction of the Engineer-in-charge.