Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.2 LAccepted-AOC | L1 | Accepted-AOC ACCEPTED DUE TO LOWER VALUE | |
| 2 | L2₹1.3 L+₹3,797.29 (3.05%)Rejected-AOC KOVUMMAL MARUTHONKARA AE | MALAPPURAM | KERALA | 673638 | L2 | Rejected-AOC REJECTED DUE TO HIGHER VALUE |
| Sl No | Description | Qty | Unit | SURESH K K L2 | SREEJITH L1 |
|---|---|---|---|---|---|
| 1.00Building | |||||
| 1.00 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 279.5 | kg | 149.49 ₹41,782.01 | 147.7 ₹41,281.71 Lowest |
| 1.00 | OD185674/2025-2026:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 58 | sqm | 599.48 ₹34,769.84 | 592.29 ₹34,352.82 Lowest |
| 1.00 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 0.05 | cum | 7,841.16 ₹368.53 | 7,747.07 ₹364.11 Lowest |
| 1.00 | 4.3.1:Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns | 0.75 | sqm | 329.03 ₹246.77 | 325.08 ₹243.81 Lowest |
| 1.00 | 13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work | 17.98 | sqm | 140.37 ₹2,523.85 | 138.69 ₹2,493.65 Lowest |
| 1.01 | 51.2.3:Filling with Quarry Muck <br> Filling up low lying and water logged areas with local material/ quarry muck, spreading in layers, leveling the top at site and consolidation by ramming, etc complete for improving the CBR value of subgrade | 5.5 | cum | 901.76 ₹4,959.68 | 890.94 ₹4,900.17 Lowest |
| 1.01 | 16.83:Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge. | 55 | sqm | 108.62 ₹5,974.1 | 107.32 ₹5,902.6 Lowest |
| 1.01 | OD215622/2025-2026:Providing and laying 60 mm thick factory made cement concrete interlocking paver block
made by block making machine with strong vibratory compaction, of approved size, design
& shape, laid in required colour and pattern over and including 50 mm thick compacted
bed of 6mm metal , filling the joints with fine sand etc. all complete as per the direction of
Engineer-in-charge. | 16.5 | sqm | 640.56 ₹10,569.24 | 632.87 ₹10,442.36 Lowest |
| 1.01 | OD183518/2025-2026: Providing and laying 60 mm thick factory made cement concrete interlocking paver block
made by block making machine with strong vibratory compaction, of approved size, design
& shape, laid in required colour and pattern over and including 50 mm thick compacted
bed of 6mm metal , filling the joints with fine sand etc. all complete as per the direction of
Engineer-in-charge.Deptl | 38.5 | sqm | 700 ₹26,950 | 632.87 ₹24,365.5 Lowest |
Tender Value
₹1.3 L
EMD Value
₹3,146
Closing Date
27 Aug 2025, 4:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AE KUNNUMMAL GP
AE KUNNUMMAL GP
Annual Plan Maintanence work of Subcenters at kunnummal GP 58 2025 26 General Civil Work
2025_LSGD_786868_1
AE/LSGD/KGP/TN12/25-26
Open Tender
Civil Works - Roads
Item Rate
KUNNUMMAL GP
Please refer Tender documents.
10 documents required · 10 mandatory
₹555
Yes
₹3,146
Yes
16 Oct 2025
16 Aug 2025
29 Aug 2025
16 Aug 2025
27 Aug 2025
16 Aug 2025
Amount
Building
50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
OD185674/2025-2026:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
4.3.1:Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns
13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work
51.2.3:Filling with Quarry Muck <br> Filling up low lying and water logged areas with local material/ quarry muck, spreading in layers, leveling the top at site and consolidation by ramming, etc complete for improving the CBR value of subgrade
16.83:Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge.
OD215622/2025-2026:Providing and laying 60 mm thick factory made cement concrete interlocking paver block made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of 6mm metal , filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.
OD183518/2025-2026: Providing and laying 60 mm thick factory made cement concrete interlocking paver block made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of 6mm metal , filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.Deptl
SURESH K K (BID ID -2308444)
Bidder Name
SURESH K K
SREEJITH
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .