PROVISION OF COVERED WEATHER SHED AND CONNECTED WORKS AT IN-LIVING ACCOMMODATION AT CGAE KOCHI

Amount

Demolition of concrete surfaces in ground floor and paving n.exc. 15cm thickness (below or above ground level) complete all as specified and as directed.

Material and labour for reinforced cement concrete M-30 design mix using 20 mm graded stone aggregate as in as in beams, cantilever, lintels over 1.5M span etc complete all as specified and as directed.

Material and Labour for reinforced cement concrete M30 design mix using 20mm graded stone aggregate in Columns, pillars, piers, posts and struts complete all as specified and as directed

Material and labour for RCC M-30 design mix using 20 mm graded stone aggregate as in slabs supported on wall, beams and columns, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

Material and labour for TMT bars(CRS/HCR), 10mm dia and over cut to length bent to shape required including cranking, hooking ends and binding with mild steel wire annealed not less than 0.9mm dia complete all as specified and as directed.

Material and Labour for TMT(CRS/HCR) bars 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wires (annealed) not less than 0.9 mm dia or secured with clips complete all as specified and as directed.

Use and waste for form work to sides and soffits of beams, lintels etc, fair finished flat surfaces of concrete all as specified and as directed.

Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings, and similar work, not exceeding 200 mm thick etc, fair finshed surfaces of concrete (Horizontal or sloping) complete all as specified and as directed.

Use and waste of formwork to sides of foundation footing, for rough finished surfaces, flat complete all as specified and as directed.

Material and labour for applying oil based bitumen primer conforming to IS 3384-1986 at 0.20 kg/Sqm on prepared surface and applying of one coat of blown grade hot bitumen 85/25 conforming to IS 702 @ 1.20 kg / sqm and applying roof treatment with APP modified waterproofing membrane weighing not less than 3kg/sqm, reinforced with non woven polyster matt weighing not less than 160 gm/sqm having softening point not less than 140 degree centigrade, longitudinal tensile strength not less than 650N/Sqm cm, tearing strength of 180N(Minimum), applied by torch-on application including minimum 10 cm over lap and 15 cm end lap and applying of one coat of blown grade hot bitumen 85/25 conforming to IS 702 @ 1.20 kg / sqm over the membrane and then applying solar reflective bituminous aluminium paint for thermal insulation @ 0.10 kg/sqm complete all as specified and directed. NOTE:All necessary safety measures shall be ensured by the contractor during execution of work at site and quoted rate shall be deemed to be inclusive of the same.

Material and labour for Precast cement concrete solid block masonry using soild PCC block grade C4, exceeding 10 cm in width and built in cement mortar 1:6 complete all as per specified and as directed.

Material and Labour for 15mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth with out using extra cement complete all as specified and as directed.

Material and labour for 15mm thick rendering on brick/concrete surfaces in CM 1:4, finished even and smooth without using extra cement complete all as specified and as directed.

Supply and fix structural steel work in tubular trusses including special shaped washer complete using ERW or induction butt welded tubes conforming to IS - 1161-1979 grade St.-240 all as specified and as directed.

Material and labour for plain cement concret 1:3:6 type C-2, 75mm thickness using 40 mm graded stone aggregate as in sub bases and pavings complete all as specified and directed.

Supply and fix vulcanized rubber stable mat flooring of 18 mm + 1mm thick having Tensile strength 4 Mpa, Hardness 70, Elongation at break 150%, Density 1.30, Abrasion resistence 400 cumm etc.., plain colour laid Over concrete surface with approved rubber based adhesive including stretching, cutting, fittings and filling of gap between mat and wall with epoxy complete all as specified and directed. The Rubber Mat specified above shall be procured/ purchased from one of the following manufactures Make.:M/S Polymax India, M/S Travancore cocotuft Pvt Ltd, M/S Polytag India, M/S TJP Rubber Industries, M/S Haima, M/S P.K.Govindan Company, M/S Floor Fashion

Material and Labour for glazed ceramic coloured tiles in vertical surface 450x300x7-8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles over and including 10mm thick backing coat in CM 1:4 cmplete all as specified.

Supply and fixing Solid PVC Door Frame of size 50 mm x47mm made out of 5 mm plain colour PVC sheet reinforced with M.S. Square tube, supporting & fixing in opening as per specification & drawing complete all as specified and directed.

Supply and fix factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of mild steel tubes for top & bottom rails, mild steel frame shall be covered with heat moulded plian colour PVC 'C' channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the mild steel frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement supplying and fixing in the frame at site as per specification & drawing of SSR Part II.

Excavation over areas n. exc 1.5 m deep and getting out in soft/loose soil complete all as specified and as directed.

Material and labour for hard core with broken stone or boulders of gauge not exceeding 63 mm, deposited, spread, and levelled in layers not exceeding 15 cm thick watered and rammed to a true surface all as specified and as directed.

Material and Labour for 100mm thick Plain Cement Concrete 1:3:6 type C2 using 40 mm graded stone aggregate as in plinth protection, floors, pavings and hardstanding etc, finished even smooth without using extra cement etc including necessary forwork, complete all as specified and as directed.

Material and labour for machine pressed precast concrete interlocking paver block, any shape and size of 80mm thickness M-40 grade conforming to IS 15658-2006 with grey cement and pigment laid over 50mm thick cushion of river sand screen bed, compacted with mechanical surface vibrator complete all as specified and directed. Note: Sand cushioning will be measured and paid seperately.

Supply and fix PVC wall paneeling of surface laminated any pattern and any shape of 7 to 10mm thickness and any colour at any position inclusive of solvent cement and fixing at over a grid of PVC frame installed on the wall, which works as a base to install the PVC wall panels. Each panel have to interlock with each other complet all as per manufactures instruction complete all as specified and as directed by Engineer in Charge.

Material and labour for preparation of new or previously untreated steel surface over 10 cm width or girth and applying two coats of synthentic enamel paint over a coat of red oxide primer complete all as specified and directed.

Supply and fixing pre-colour coated high tensile strength galvalume sheet roofing with yield strength (550 MPA) prepainted with aluminium (55%) and zinc (45%) alloy coating applied through continous hot dip process having tatal coated thickness (TCT) of 0.50mm with minimum coating mass on both sides @ 150gms/sqm in length and width as per site condition fixed with complete acessories as per manufacturer's instructions through specialist agency complete all as specified and as directed.

Supply and Fix Aluminium Composite Panel(ACP) cladding using 3mm thick ACP panel of approved colour jointed as per manufacturer's instruction, fixed to steel frame work by using aluminium blind rivets with ss screw, filling the joint and voids with high quality sealant (silicon gel) complete all as specified and as directed. NOTE: steel frame work shall be measured and paid separately.

Supply and fixing 600 mm long PVC connections 15 mm size with PTMT nuts at both end complete.

Supply and fix waste coupling of PTMT 32 mm size (half or full threaded) suitable for urinals/ WHB/Sink etc (Minimum weight 32 mm - 45 gms) all as specified and as directed.

Supply and fix in repair 10 Ltr capacity PVC valveless, syphonic action type, flushing cistern low level, white, with inlet ball valve, float and handle including brackets, flushing pipe, 450mm long PVC Connection and connection to trap, and to flushing and making good to floor complete all as specified .

Supply and fix plastic water closet seat cover, black or white, closed pattern with flat bottom, and cover and mild steel aluminised hinging device etc complete all as specified and directed.

Supply and fix Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium ally sheet foundation box, main body with stainless steel cover, govering pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed. Make: SANDHU, EVEREST

Supply and fix Bib taps of 15mm dia, cast copper alloy chromium plated fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

Supply and fix Angle valve CP cast copper alloy, with capstan handle, screwed down, high pressure screwed both ends for 15 mm bore iron pipe or for unions and fixed complete all as specified and directed.

Supply and fix Stop valves, CP cast copper alloy , screwed down, high pressure, with crutch or butterfly handle, screwed both ends for 20mm bore iron pipe or for unions and fixed, complete all as specified.

Supply and fixing vitreous China wash hand basin, white, flat back size 580X450mm including 32mm brass chromium plated waste fitting, a pair of cast iron bracket duly painted including cutting and pinning in ends making good disturbed surfaces in CM 1:3 excluding pillar tap but chain , plug and porcelain stopper, brackets etc complete all as specified and directed.

S&F Pillars taps, 15mm dia bore cast copper alloy with capstan heads, CP fency type screwed down high pressure with or without lettered'Hot' or cold with long screwed shanks and ly nuts, screwed for iron pipe and fixed complete all as specified and directed

Supply and fixing ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed suitable for 15 mm ISI marked and taking down unserviceable ball valves all as specified and as directed.

Supply and fix Rotational moulded Polyetheylene Water Storage Tank 500 Ltr capacity Triple Layer (Cylinderical verticle with closed top) including 15mm dia GI Medium Grade 200mm long overflow and wash out pipe each with all required fittings, Checknut, Stopper etc complete hoisted and fixed in position, including all incoming and outgoing connection of GI pipe complete and including 20mm PTMT Ball valves high pressure wiith epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete for 15mm dia pipe (Minimum weight 15mm- 142 gms/each) fixed on roof top complete all as specified and directed.

Supply and fix Vitreous china bowl urinal flat back size 465 x 355 x 265 mm ,white ,with grating and union for discharge pipe including CP tortise shape urinal spreader and PVC waste pipe complete all as specified and as directed.

Material and labour for preparation of new plastered/concrete surfaces of walls, providing one or more coats of Birla white wall care putty to achieve smooth surfaces and applying two coats of distemper oil emulsion of approved shade/tint over a coat of compatiable priming paint complete all as specified.

Material and Labour for preparation of plastered surfaces of wall and applying two coats of weather proof antifungal exterior emulsion paint over a coat of primer including necessary scaffolding complete all as specified and as directed. Make:Apex Ultima Protek of Asian/Exel of Nerolac/Weather Coat of Berger

S & F PVC rain water half round valley gutter pipes of 110 mm dia vertically fixed to wall / cladding using MS clamps. Top end of the pipe shall be jointed with rain water gutter complete all as specified and as directed. (MS clamps shall be measured and paid under relevant item).

Supply and fix PVC pipe (SWR) single socketed in any length with rubber ring joint 110mm dia fixed to wall complete all as specified and as directed.

Supply and Fix PVC (SWR) bends any radius 110mm bore dia with access door complete all as specified and as directed.

Supply and Fix PVC (SWR) drop end suitable 110mm bore half round PVC rain water valley guttercomplete all as specified and as directed.

Supply and Fix PVC (SWR) stop end suitable 110mm bore half round PVC rain water valley guttercomplete all as specified and as directed.

Supply and fix stack clamps made out of 50mm x5mm MS flat iron and 16 mm dia round iron stays , including bolts and nuts and securung ends of stays to walls or roofs for 100mm pipe complete all as specified and as directed.

Excavation in post holes (or similar holes) each not exceeding 0.5 cum and getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers n exc 25cm, watering and removing surplus soil to a distance n exc 50m and making good surface in soft/loose soil complete all as specified and directed.

Material and Labour for Plain Cement concrete 1:3:6 type C2 using 40mm graded stone aggregate as in foundations filling and mass concrete for stays foundation/ filling and mass concrete and removing and depositing surplus concrete to clear off the site complete all as specified and as directed.

Supply and fix Aluminium Powder coated sliding window shutter using aluminium section weighing 0.55kg/m, 20mm thick using standard vertical handle section, interlocking section, top and bottom rails, U channels for all -around for gauge shutters. All sections are of medium weight series of approved make in three track sliding window in which two shutters with and including of 4mm thick Modi guard or equivalent float glass and one shutter fixed with inclusive of stainless steel wire mesh of size 0.30mm nominal dia and average with of aperture 1.40mm, including necessary jointing cleats, glazing clips , good quality bearing rollers, Neoprene rubber Gasket and rubber beading of any type, screws , aluminium fitting such as Gasket, handle (01 Nos on each shutter), interlocking arrangements complete all as specified and asdirected by Engr in Charge. Note: The quoted rate shall be inclusive of 4mm thick float glass and Stainless steel wire cloth.

Material and Labour for point wiring complete using 1.5 Sqmm PVC insulated unsheathed copper conductor, stranded cable (FRLS) upto and including working voltage 1100volts grade, drawn through and including PVC casing and caping including all accessories ISI marked including press fit white PVC open switch/surface board high strength and crack resistance and unsheathed copper conductor stranded cable(FRLS) earth continuity wire connected to DBs/sunken boxes/fittings of size 1.5 Sqmm Cross sectional area and all other metal parts with earth dolly for the following:-. (a ) one light point controlled by one switch 5 Amps

(b ) one fan point point controlled by one switch 5 Amps

(c) One 3 pin socket outlet 5 Amps on Independent board

(d ) One 3 pin socket outlet 5 Amps on same board

All as per Item No. 1 above but with 4 sq mm PVC insulated copper conductor cable(FRLS) including 4 sq mm PVC copper conductor used as earth wire for power point on independent board for One 3 pin socket outlet, 15 Amps.

Supply and fix Modular switch one way 6A, 1 Module complete all as specified and as directed.

Supply and fix Modular socket outlet, 6 Amps, 2 and 3 pin combined complete all as specified and directed.

Supply and Fix switch socket combination 3 pin, 5 Amps, 230 volt AC with ISI marked flush type complete all as specified and as directed.

Supply ans fix Modular switch socket combination 16 A 6 pin complete all as specified and directed.

Supply and fix Modular fan regulator step type, 120 Watt complete all as specified and directed.

Supply only LED luminaire 600 mm x 600 mm,40 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed. Make: Havells Cat part No. PLANO2X2PLR42WLED840S or equivalent in Philips/Bajaj/Surya.

Supply and fix ceiling fan 1200mm sweep, 230 volt withdown rod, canopy etc, single phase 230 volt connecting complete all as specified and as directed.

Supply and fix MCB SP 6-32 amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of single pole in the MCB DB,IP 20 transparent lebel holder fully insulated safety shutters suitable for cable up to 35 Sqmm cross sectional area complete including suitable size copper Lugs complete all as specified and directed.

Supply and fix MCB SPN 40 amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of single pole in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

Supply and fix Distribution board (DB) made out of sheet metal enclosure (CRCA sheet), dust and vermin proof, SPN 8 way with 200 Amps rated copper bus bar double door protection, neutral bar,earth bar, single pole and neutral 240 volts, MCBs used as incommer Double door, flush to wall complete all as specified and directed .

Material and labour for Sub main wiring using two runs of single core PVC insulated cable (FRLS) 6 sqmm copper conductor multi stranded and one run of 6 sqmm copper conductor insulated cable (FRLS)using as earth wire drawn through and including suitable size PVC casing and caping including taking down old aluminium/Copper Sub main wirng complete all as specified and directed. Note- 3 run of 6 sq mm PVC copper wire and One run of PVC casing caping shall be measured and paid as one unit.

K R JOSEPH AND SONS

Phoenix engineers and construction