Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹13.7 LAccepted-AOC MOORKOTH HOUSE PO MUZHAPPILANGAD KANNUR 670 662 | KANNUR | KERALA | 670662 | ₹13.7 L | 1 | Accepted-AOC L1 bidder |
| 2 | 2₹14.8 L+₹1.1 L (7.67%)Rejected-AOC | ₹14.8 L+₹1.1 L (7.67%) | 2 | Rejected-AOC L2 bidder |
| 3 | Rejected-Technical | - | - | Rejected-Technical Shortfall docs not submitted. Not satisfied the technical criteria |
| Sl No | Description | Qty | Unit | VINEEP M L1 | MAS ENTERPRISES L2 |
|---|---|---|---|---|---|
| 1.00 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) | 5 | Cum | 9,099.34 ₹45,496.7 Lowest | 15,800 ₹79,000 |
| 2.00 | Material and labour for half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level built in 1:4 (1 cement :4 coarse sand) | 4.9 | Sqm | 12,482.01 ₹61,161.85 | 6,000 ₹29,400 Lowest |
| 3.00 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : (copper oxidized as per IS: 1378): 100x10 mm | 30 | each | 263.82 ₹7,914.6 Lowest | 500 ₹15,000 |
| 4.00 | Providing and fixing IS : 12817 marked stainless steel butt hinges of size 100X58X1.90 mm with stainless steel screws etc. complete | 45 | each | 143.05 ₹6,437.25 | 100 ₹4,500 Lowest |
| 5.00 | Providing and fixing PTMT handles with necessary screws etc. complete,125x34x24 mm weighing not less than 23 gms | 30 | each | 57.39 ₹1,721.7 Lowest | 200 ₹6,000 |
| 6.00 | Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5 mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineer- in-Charge. | 69 | metre | 658.16 ₹45,413.04 Lowest | 900 ₹62,100 |
| 7.00 | Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC ‘C’ channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the ‘C’ Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer’s specification & drawing.30 mm thick plain PVC door shutters | 18 | Sqm | 4,251.75 ₹76,531.5 | 3,200 ₹57,600 Lowest |
| 8.00 | Providing and laying Vitrified tiles of size 600x600mm (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, Dado, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). | 218 | Sqm | 2,529.81 ₹5,51,498.58 | 2,040 ₹4,44,720 Lowest |
| 9.00 | Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. Size of Tile 600x600 mm. | 273 | Sqm | 412.81 ₹1,12,697.13 Lowest | 420 ₹1,14,660 |
| 10.00 | Providing and laying Vitrified tiles of size 600x600mm in floor (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). | 55 | sqm | 2,304.68 ₹1,26,757.4 | 1,980 ₹1,08,900 Lowest |
Tender Value
₹12.8 L
EMD Value
₹25,670
Closing Date
8 Apr 2026, 10:00 amClosed
Regional Director
Regional Office, Panchdeep Bhawan Swaraj Round Thrissur Kerala
SR Work Renovation of toilet at second floor male ward first floor post labor room Mens common toilet at 1st and 2nd floor and Dental OPD in ESIC Hospital Udyogamandal 2nd call
2026_ESIC_903063_2
01/2025-26/SR/C-1/PMD/RO-TCR
Open Tender
Civil Works - Buildings
Item Rate
Udyogamandal
Please refer tender document
8 documents required · 8 mandatory
₹0
₹25,670
Yes
29 Jun 2026
30 Mar 2026
9 Apr 2026
30 Mar 2026
8 Apr 2026
30 Mar 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) | |||||
| 2Material and labour for half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level built in 1:4 (1 cement :4 coarse sand) | |||||
| 3Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : (copper oxidized as per IS: 1378): 100x10 mm | |||||
| 4Providing and fixing IS : 12817 marked stainless steel butt hinges of size 100X58X1.90 mm with stainless steel screws etc. complete | |||||
| 5Providing and fixing PTMT handles with necessary screws etc. complete,125x34x24 mm weighing not less than 23 gms | |||||
| 6Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5 mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineer- in-Charge. | |||||
| 7Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC ‘C’ channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the ‘C’ Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer’s specification & drawing.30 mm thick plain PVC door shutters | |||||
| 8Providing and laying Vitrified tiles of size 600x600mm (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, Dado, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). | |||||
| 9Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. Size of Tile 600x600 mm. | |||||
| 10Providing and laying Vitrified tiles of size 600x600mm in floor (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). | |||||
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 12.47 MB
BOQ_950314.xls
BOQ • 0.26 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .