Construction of Kanjia Huda near FSTP in Ward No-12 of Attabira NAC

Earth work in hard soil or gravelly soil within 50M initial lead and 1.5M initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3M in depth and as per the direction of the Engineer-in-charge.

Supplying, filling in foundation and plinth with sand in 22.5 cm (9”) thick layers including watering and ramming with cost, conveyance, royalties and taxes of sand with labour and T&P required for the work etc. complete (Measurement will be taken on finished compacted section only).

Cement concrete of proportion (1:4:8) in foundation and floors using 4cm (1 ½”) size clean hard black Crusher broken granite stone metal of approved quality and from approved quarry including hoisting, lowering and laying concrete in layers not exceeding 15 cm. (6”) thick to the required level ramming, watering, curing etc. complete including cost, conveyance, royalties and taxes of all materials with all labour, cess and T&P etc. all cost comp.

R.C.C. work of M-25 Grade with 20mm and down graded b.h.c.b.g. chips including hoisting and laying.

Rigid and smooth centering and shuttering for R.C.C. works including false works and dismantling them after casting including cost of materials complete . F and plinth

Rigid and smooth centering and shuttering for R.C.C. works including false works and dismantling them after casting including cost of materials complete . Beam and column

Supplying ,fitting and placing uncoated HYSD bar reinforcement complete as per drawing and technical specification

Fly ash brick masonry in cement mortar (1:4) in foundation plinth using K.B. bricks of 23cm x 11cm x 8cm size having a crushing strength of not less than 75 kg/cm2 with dimensional tolerance  8% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing including cost, conveyance, royalties and taxes of all materials with all labour, cess and T&P required for the work complete in all respect in all floors.

Fly ash brick masonry in cement mortar (1:4) inSSof 23cm x 11cm x 8cm size having a crushing strength of not less than 75 kg/cm2 with dimensional tolerance  8% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing including cost, conveyance, royalties and taxes of all materials with all labour, cess and T&P required for the work complete in all respect in all floors.

12mm. thick cement plaster (1:6) for brick work per 1 Sqm

16mm (½”) thick cement plaster (1:6) finished smooth tINside smooth surface of brick walls after raking out the joint including watering and curing with cost, conveyance, royalties and taxes of all materials with all labour and T&P required for the work etc. complete in all respect.

Priming one coat with any approved shade to wall for plaster. Per 1 Sqm

Finishing walls with Weather Coat of approved shade on new work two coat to give an even shade inculding cost of paint. Per 1 Sqm

Supplying, fitting and fixing of Prepolished Cement Concrete Paving tiles of 80mm thick of Make Ultra, Eurocorner, Duracrete of size laid on sand base including cost of all materials, labour, T&P etc required for the work all complete as per the direction of the Engineer in charge

Supplying all materials, labour, T&P for providing Mild Steel tubular posts and Trusses and base plates made out of ERW tubes, Grade YST 210 conforming to ISS no.1161/79 (3rd Revision) duly painted with red oxide primer etc. complete.

Supplying fitting & fixing of Precoated Galvanized iron Profile sheet semi gloss of 1000mm width & total coated thickness 0.50mm (Dura shine, Coloured- TATA make) in roof drilling hole in wind ties including fixing of ridges valleys, wind ties etc. complete including cost of sheet & all fitting (per 1 Sq. Mtr.)

Supplying fitting and fixing of MS Iron Door