Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.1 LAccepted-AOC | L1 | Accepted-AOC Over all rates are reasonable and lowest. | |
| 2 | L2₹37.5 L+₹5.5 L (17.1%)Rejected-Finance 113 SURESH SHARMA NAGAR NEAR S S V ENTER COLLEGE BAREILLY 243001 | BAREILLY | UTTAR PRADESH | 243001 | L2 | Rejected-Finance Over all rates are higher than L-1. | |
| 3 | L3₹38.9 L+₹6.8 L (21.3%)Rejected-Finance 160 PREM NAGAR BAREILLY | L3 | Rejected-Finance Over all rates are higher than L-1. | |
| 4 | L4₹40.8 L+₹8.8 L (27.4%)Rejected-Finance WARD NO 5 THIRIYA NIZAWAT KHAN BAREILLY 243123 UP | BAREILLY | BAREILLY | UTTAR PRADESH | 243123 | L4 | Rejected-Finance Over all rates are higher than L-1. | |
| 5 | L5₹43.9 L+₹11.9 L (37.2%)Rejected-Finance GE WEST BAREILLY | L5 | Rejected-Finance Over all rates are higher than L-1. |
| Sl No | Description | Qty | Unit | JAI SRI RAM ASSOCIATE L1 | RIYASAT ALI KHAN L4 | SANJEEV ENTERPRISES L10 | Builders Harpal L3 | Mohit Enterprises L7 | M/S Shree Sai Builders L9 | M/S Harshri Nath Enterprises L2 | novell engineers L8 | vipul nagaich L6 | Goel Enterprises L5 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Removal of existing treatment of any thickness and wire brushing and cleaning top surface of tiles and roofs to preparation of surface for applying in primer and bitumen complete all as specified and directed. | 2,800 | Sqm | 10 ₹28,000 | 5 ₹14,000 | 50 ₹1,40,000 | 5 ₹14,000 | 6 ₹16,800 | 5 ₹14,000 | 3 ₹8,400 Lowest | 25 ₹70,000 | 10 ₹28,000 | 5 ₹14,000 |
| 2.00 | M&L PCC 1:2:4 type B-0 (using 12.50 mm stone aggregate) as in, levelling course with to be finished even and fair without using extra cement on roof surface / chajja (thickness of concrete will be provided as per site requirement and as directed by engr-in-charge) roof kerbs, coping, benching etc including weathering slightly rounded or chamfered angles and throating complete all as specified and directed. | 70 | Cum | 4,000 ₹2,80,000 | 4,600 ₹3,22,000 | 4,000 ₹2,80,000 | 3,200 ₹2,24,000 | 5,000 ₹3,50,000 | 4,500 ₹3,15,000 | 4,500 ₹3,15,000 | 3,000 ₹2,10,000 Lowest | 5,500 ₹3,85,000 | 7,500 ₹5,25,000 |
| 3.00 | M&L for 15 mm thick redering on fair faces of concrete surfaces in CM 1:4 with water proofing compound @ 200ml per 50 Kg of cement and incl taking down of old plaster on concrete surface complete all as specified and directed.
(NOTE:- WPC shall be measured and paid separately) | 2,800 | Sqm | 80 ₹2,24,000 Lowest | 130 ₹3,64,000 | 220 ₹6,16,000 | 120 ₹3,36,000 | 150 ₹4,20,000 | 160 ₹4,48,000 | 135 ₹3,78,000 | 120 ₹3,36,000 | 160 ₹4,48,000 | 145 ₹4,06,000 |
| 4.00 | Supply & providing water proofing treatment with polymeric standard water proofing membrane, Aquaflex having 10 years guarantee for water tightness all as specified and described as under:-
(a) Preparation of RCC roof surface and applying one coat of polymeric modified bitumen 85/25 @ 1.2 Kg/Sqm over a coat of polymeric primer @ 0.30 Kg/Sqm including cleaning surface, all as per manufacturer's specification complete all as specified and directed.
(b) Supply & providing water proofing treatment with polymeric proofing membrane of 3Kg/Sqm (Minimum) HYPERPLAS STANDARD/MULTIPLAS STANDARD consting of 100micron HMHDPE film centre core including coating the surface with the bitumen 85/25 @ 1.20 Kg/Sqm and torch application of membrane with 10cm overlaps and longitudinal edges 15 cm at the ends as required thereof, complete all as specified & directed. | 800 | Sqm | 340 ₹2,72,000 | 520 ₹4,16,000 | 500 ₹4,00,000 | 290 ₹2,32,000 Lowest | 400 ₹3,20,000 | 425 ₹3,40,000 | 375 ₹3,00,000 | 350 ₹2,80,000 | 425 ₹3,40,000 | 350 ₹2,80,000 |
| 5.00 | M&L for applying two coat of Aluminium paint over a APP membrane surface of any description not otherwise described over 10 cm width or girth as specified and directed | 800 | Sqm | 40 ₹32,000 | 20 ₹16,000 Lowest | 60 ₹48,000 | 50 ₹40,000 | 45 ₹36,000 | 45 ₹36,000 | 50 ₹40,000 | 30 ₹24,000 | 35 ₹28,000 | 40 ₹32,000 |
| 6.00 | M & L for liquid water proofing tratement on roof/terrace/podium surface and applying three coats of fiber reinforced elastomeric liquid water proofing treatment incluing crack seal treatment as per site requirement, formulated with select elastomeric and resilient acrylic polymers and reinforcing polyester fiber, upon curing, forms a thick seamless, durable treatment. Apply self priming coat with 33% of water dilution in a verticle or horizontal surface. Treatment should be viscous liquid apprearence, colour white and applied :- (a) Apply first coat of the material shoulde be apply in both direction of surface without dilution to achieve a forced system coverage of 0.93 sq metre per liter. Allow it to dry for 4-6 hours between coats. (b) Apply second coats without dilution to achieve the forced system coverage of 1.20 sqm per liter on perviously painting surface with high quality. Allow it to dry for 4-6 hours between second and third coats. (c) Apply Third coats without dilution to achieve the forced system coverage of 2.32 sqm per liter on perviously painting surface with high quality. Allow it to dry for 4-6 hours before exterior emulation plaint Note :- Executive as per manufacture instruction including scaffolding, trestles, ladders cradles and necessary safety measures complete all as directed by Engineer-in-chage. Make Asian Paint (Smart care Damp proof) or equivelent of BERGER/SHALIMAR. | 2,000 | Sqm | 150 ₹3,00,000 | 450 ₹9,00,000 | 400 ₹8,00,000 | 390 ₹7,80,000 | 350 ₹7,00,000 | 480 ₹9,60,000 | 250 ₹5,00,000 | 250 ₹5,00,000 | 350 ₹7,00,000 | 110 ₹2,20,000 Lowest |
| 7.00 | Demolition of brick or stone / boulder work built in cement mortar as in quoins, arches,pillars etc complete all as specified and directed. | 41.5 | Cum | 250 ₹10,375 | 200 ₹8,300 | 500 ₹20,750 | 90 ₹3,735 | 50 ₹2,075 Lowest | 100 ₹4,150 | 50 ₹2,075 Lowest | 200 ₹8,300 | 60 ₹2,490 | 600 ₹24,900 |
| 8.00 | M&L for brickwork with fly ash brick in CM 1: 4 straight or curved on plan exc 6 m mean radius complete all as specified and directed. | 10 | Cum | 4,800 ₹48,000 | 4,100 ₹41,000 | 4,500 ₹45,000 | 3,400 ₹34,000 Lowest | 4,500 ₹45,000 | 5,500 ₹55,000 | 3,800 ₹38,000 | 6,500 ₹65,000 | 3,650 ₹36,500 | 5,500 ₹55,000 |
| 9.00 | M & L brick work with sub class B bricks, straight or curved on plan exc 6m mean radious built in CM (1:6) etc complete all as specified and directed. | 10 | Cum | 2,800 ₹28,000 | 2,600 ₹26,000 | 3,500 ₹35,000 | 2,400 ₹24,000 Lowest | 3,500 ₹35,000 | 3,000 ₹30,000 | 3,500 ₹35,000 | 6,500 ₹65,000 | 3,650 ₹36,500 | 4,000 ₹40,000 |
| 10.00 | M & L brickwork with sub class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in built in CM (1:4) etc complete all as specified and directed. | 100 | Sqm | 550 ₹55,000 | 300 ₹30,000 Lowest | 500 ₹50,000 | 450 ₹45,000 | 650 ₹65,000 | 400 ₹40,000 | 400 ₹40,000 | 650 ₹65,000 | 550 ₹55,000 | 350 ₹35,000 |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
27 Jun 2025, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (West) Bareilly
GE (West) Bareilly
REPAIR TO ALUMINIUM DOORS, WINDOWS, PARTITIONS, CUP BOARDS, CHAJJAS, ROOF TREATEMENT AND OTHER MISC WORK AT CERTAIN LOCATIONS OF ZONE-II AND III UNDER AGE B/R - II AT GE (WEST) BAREILLY.
2025_MES_711420_1
8251/C/E8
Open Tender
Civil Works
Item Rate
180 days
GE (West) Bareilly
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE (West) Bareilly
₹90,000
Yes
30 Aug 2025
30 May 2025
30 Jun 2025
30 May 2025
27 Jun 2025
14 Jun 2025
Amount
Removal of existing treatment of any thickness and wire brushing and cleaning top surface of tiles and roofs to preparation of surface for applying in primer and bitumen complete all as specified and directed.
M&L PCC 1:2:4 type B-0 (using 12.50 mm stone aggregate) as in, levelling course with to be finished even and fair without using extra cement on roof surface / chajja (thickness of concrete will be provided as per site requirement and as directed by engr-in-charge) roof kerbs, coping, benching etc including weathering slightly rounded or chamfered angles and throating complete all as specified and directed.
M&L for 15 mm thick redering on fair faces of concrete surfaces in CM 1:4 with water proofing compound @ 200ml per 50 Kg of cement and incl taking down of old plaster on concrete surface complete all as specified and directed. (NOTE:- WPC shall be measured and paid separately)
Supply & providing water proofing treatment with polymeric standard water proofing membrane, Aquaflex having 10 years guarantee for water tightness all as specified and described as under:- (a) Preparation of RCC roof surface and applying one coat of polymeric modified bitumen 85/25 @ 1.2 Kg/Sqm over a coat of polymeric primer @ 0.30 Kg/Sqm including cleaning surface, all as per manufacturer's specification complete all as specified and directed. (b) Supply & providing water proofing treatment with polymeric proofing membrane of 3Kg/Sqm (Minimum) HYPERPLAS STANDARD/MULTIPLAS STANDARD consting of 100micron HMHDPE film centre core including coating the surface with the bitumen 85/25 @ 1.20 Kg/Sqm and torch application of membrane with 10cm overlaps and longitudinal edges 15 cm at the ends as required thereof, complete all as specified & directed.
M&L for applying two coat of Aluminium paint over a APP membrane surface of any description not otherwise described over 10 cm width or girth as specified and directed
Demolition of brick or stone / boulder work built in cement mortar as in quoins, arches,pillars etc complete all as specified and directed.
M&L for brickwork with fly ash brick in CM 1: 4 straight or curved on plan exc 6 m mean radius complete all as specified and directed.
M & L brick work with sub class B bricks, straight or curved on plan exc 6m mean radious built in CM (1:6) etc complete all as specified and directed.
M & L brickwork with sub class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in built in CM (1:4) etc complete all as specified and directed.
Labour only for brickwork with except brick straight or curved on plan exc 6m mean radius built in in CM (1:6) etc as complete all as specified and directed.
Demolition of cement concrete (un-reinforced) including terrazzo, tiling etc of any description and in any position not otherwise specifically provided for complete all as specified and directed.
Supply only liquid water proofing compound all as specified and directed. ( Make : Dr. Fixit of pidilite or equivalent)
Disconecting of existing tank and fixing after roof treatment including all fittings complete all as specified and directed.
M&L for 25 mm thick cement concrete type B0, 1:2:4 (using 12.5 mm graded stone aggregate) in floors, finished rough to receive floor tiles complete all as specified and directed
Dismantling floor, hearth or wall tiling/terrazo including cement mortar bedding complete or in patches and removing rubbish off the premises complete all as specified and directed.
M&L for glazed coloured ceramic tiles 300 x 200mm x 7mm thick in vertical wall complete or in patches surfaces set and jointed in neat cement slurry and pointed in white cement using pigment to match the shade of tiles incl plastering 10mm thick in CM 1:4, complete all as specified and directed.
M&L for glazed coloured ceramic size of each tiles 450 x 300 mm x 7 mm thick in vertical wall complete or in patches surfaces set and jointed in neat cement slurry and pointed in white cement using pigment to match the shade of tiles incl plastering 10mm thick in CM 1:4, complete all as specified and directed.
M&L for non skid ceramic coloured tiles Edge cut 7 to 8 mm thick (Square) size of each tiles 400 x 400 mm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match incl screeding 15mm thick in CM 1:6, complete all as specified and directed.
All as per Serial item No 19 above but as in vertical surfaces incl plastering 10mm thick in CM 1:4 complete all as specified and directed
M&L for Ceramic tiles light shade 7 to 8 mm thick (square) polished, size of each tiles 600 x 600 mm in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement incl screeding 15mm thick in CM 1:6, complete all as specified and directed
All as per serial item No 21 but as in vertical surfaces incl plastering 10mm thick in CM 1:4,complete all as specified and directed
M & L for 75 mm thick cement concrete 1:3:6 type C-2, using 40 mm graded stone aggregate as in plinth protection laid to slop of 1:12, finished surface even and fair without using extra cement with and including all necessary form work to divide the area in panels, finishing exposed edges fair or rounding or chamfering where directed and providing 6 mm wide joints through out the thickness of plinth protection duly filled with mastic filling (one part of hot bitumen 85/25 and three part of fine sand by weight) complete all as specified and directed
Dismantling of cast iron /PVC/AC/SGSW pipes 100mm dia jointed in cement mortar and taking out of trenches, if required complete all as specified and directed.
S&F PVC(SWR) 110mm dia soil waste and rainwater drainage pipes single socketed in any length with rubber ring joint fixed to wall complete all as specified and directed
S&F PVC (SWR) 110mm dia bends complete all as specified and directed.
S&F rotational moulded polythene water storage tanks tripple layer white in colour (cylindrical vertical with closed top) hoisted and fixed in position capacity 500 ltrs including dismantling of existing unserviceable water tank capacity exceeding 250 ltr and not exceeding 500 ltr complete all as specified in SSR Part I and directed Make:- Sintex pure, Vectus (Smart,), Supreme white
S&F rotational moulded polythene water storage tanks tripple layer white in colour(cylindrical vertical with closed top) hoisted and fixed in position capacity 1000 ltrs including dismantling of existing unserviceable water tank capacity exceeding 500 ltr and not exceeding 1000 ltr complete all as specified in SSR Part I and directed Make:- Sintex pure, Vectus (Smart,), Supreme white
M&L for 15mm thick cement plaster on brick surfaces or concrete surfaces in CM (1:6) including finishing the surface even and fair and including taking down existing defective cement plaster on brick or stone masonary complete all as specified and directed.
M&L 15mm thick rendering on walls brick or concrete surfaces in cement mortar 1:4 with water proofing compound, incl finish even and fair w/o using extra. Cement and then applying Two coats of cement base paint on new plastered wall surfaces over a coat of primer of any description including preparation of surfaces complete all as specified
M&L 5 mm thick cement plaster on fair faces of bricks or concrete in ceiling using CM 1:4 finished even and smooth without using extra cement and then applying three coat of white wash after preparing the surface including Taking down cement plaster on brick wall/stone wall, ceilings etc, racking out joints, hacking for key & scrubbing with water complete all as specified
M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed
S & F in repairs stainless steel wire mesh 0.56 mm nominal dia of wire and average width of aperature 1.18mm and fixed with tinned takes or galvanised Wire staples complete all as specified and directed
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds glazed with putty or fixed with beads complete all as specified and directed
S&F sheet glass 3 mm thick ordinary quality and glazing with oil putty in square not exceeding 0.5 sqm in each pane complete all as specified and directed.
S&F in repairs Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.
S&F 15mm bore tubes medium grade galvanised iron with all new fitting and fixed to walls and ceiling or laid in floors including taking down old unserviceable steel tubing complete all as specified and directed.
S&F 20 mm bore tubes medium grade galvanised iron with all new fitting and fixed to walls and ceiling or laid in floors including taking down old unserviceable steel tubing complete all as specified and directed.
M& L in repair corner shower enclosure with door on wall panel thickness of glass 8mm complete all as specified and directed .
S&F in repairs Vitreous china wash down water closet (pedestal pattern) white complete, including connection to drain pipe with trap and to flushing pipe antisyphonage pipe etc complete all as specified and directed
S&F in repairs vitreous china Orissa pattern IWC size 580mm x 440mm white with integral foot rest complete including trap and fixing complete all as specified and directed.
S&F in repairs plastic water closet white seat cover closed pattern with flat bottom cover and mild steel chromium plated or aluminized hinging device complete all as specified and directed
S & F in repairs PVC low level flushing cistern of capacity 10 ltrs with inlet, ball valve, float and handle including brackets and flush pipe of PVC 32mm dia complete all as specified and directed.
S&F in repairs Vitreous china wash basin white flat back 550mm x 400mm excluding tap, waste, chain & plug but including brackets complete all as specified and directed.
S&F in repairs waste fitting 32 mm dia brass chromium plated for glazed ware sinks/basins etc with long screwed shanks and fly nuts flange and bedded in red lead cement and other end fixed complete all as specified and directed
S&F in repairs PVC waste pipe 25 mm dia 750 to 800mm long fixed to waste fitting of wash basin including socket suitable for waste fitting complete all as specified & directed
S&F in repairs centre hole basin mixture 15 mm dia chromium plated complete all as specified and directed.
S&F in repairs chromium plated fancy type stop vlave /angle valves/ two way angle valve with cup cast copper alloy screwed down high pressure, screwed both ends for iron pipes or for unions for 15 mm bore pipe complete all as specified and directed.
S&F in repairs chromium plated fancy type long body bib taps with cast copper alloy screwed down, screwed for iron pipe or for brass ferrule for 15 mm bore pipe complete all as specified and directed.
S&F in repairs 100 mm dia shower rose of Chromium plated brass for fixing 15 mm pipe with shower arm size 195 mm long with bend of 45 degree with flange complete all as specified and directed.
S&F in repairs chromium plated wall mixture with connection for shower arragement complete all as specified and directed.
S&F in repairs water jet for ETWC chromium plated with PVC connection complete all as specified and directed.
S&F CP heavy duty extension pieces 15mm bore and 25 mm long in repairs complete all as specified and directed.
S&F in repairs chromium plated hand shower (health faucet) 1 mtr PVC tube with wall hook complete for ETWC complete all as specified and directed.
S&F in repairs PVC connections 15mm dia & 450mm long with PTMT nuts complete all as specified and directed.
S&F in repairs PVC toilet cabinet with mirror of size 20"X16" of selecred quality complete all as specified and directed.
S&F in repairs grating doom 100mm dia of PTMT (minimum weight 25gms) complete all as specified and directed.
S&F in repair of PVC corner set of three of size (12'X12" ,9"X9" and 6" X6" ) with railling and complete all as specified and directed.
S&F in repairs Chromium plated toilet paper stand as per directed by Engr in-charge
S&F in repairs Chromium plated towel ring as per directed by Engr-in-charge
S&F in repairs glass shelf with chromium plated brackets of suitable size as per directed by Engr-in-charge
S&F in repairs Vitreous china wash down water closet single piece (Cascade pattern) with seamless flushing cistern square design duroplast slim seat cover, slow falling seat cover size 69x37x73CM / 66x35x71 complete, including connection to drain pipe etc complete all as specified and directed.
S&F in repairs Vitreous China table/counter top wash basin of suitable size including SS bottle trap, fixing on counter with SS waste coupling, cp single liver mixer for hot & cold (Make Jaguar, cera, Hindware waste pipe complete all as specified and as directed.
M&L for Granite (of any type) tiles 16 to 18mm thick machine cut and machine, polished,and moulding, window cills, riser of steps and urinal partition wash basin platforms and flooring,skirting/dados, kitchen like in cement mortar(1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of marble and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of marble laid over cement screed and jointed with grey cement slurry mixed with pigment to match including rubbing & mirror polishing ding and inclucding 10mm thick cement plaster on brick surfaces or concrete surface in cm (1:4) finished even and rough as screed complete all as spd and directed.
Dismantling of stone slabs and tiles of any description or thickness in floors aprons etc. laid, bedded and pointed in any mortar complete all as specified and directed.
Rounding to edges of stone slabs one edge , such as in steps , cooking platform , and other similar situations complete all as specified and directed
S&F in repairs Bib tap (15 mm)standard of PTMT any colour high pressure screwed for iron pipe and screwed complete all as specified and directed.
S&F in repairs pillar tap (15 mm)standard of PTMT any colour high pressure screwed for iron pipe and screwed complete all as specified and directed.
S&F in repairs pillar tap (15 mm)standard of chromium plated any colour high pressure screwed for iron pipe and screwed complete all as specified and directed.
S&F in repairs stop cock/ angle valve (15 mm)standard of PTMT any colour high pressure screwed for iron pipe and screwed complete all as specified and directed.
S&F in repair powder coating aluminium frame for doors, windows, ventilators and kitchen cupboards frame with one or more rebates including joining cleat for fixing etc. complete all as specified add for powder coating (minimum thickness of powder coating 50 micron) complete all as specified and directed.
S&F in repair powder coating aluminium door/window/ventilator shutters aluminium section weighing 0.55 kg/m including necessary joining cleats glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc. complete all as specified add for powder coating (minimum thickness of powder coating 50 micron) complete all as specified and directed.
S&F Sheet glass, ordinary quality and glazing with oil putty in square but n exc 0.5 Sqm in each pane 5.5mm thick incl solar control film 25 micron reflected type stcked to glass pane as per instructions of manufacture complete all as specified and directed.
S&F in repair Mortie lock, verticle type size 100 mm mild steel complete all as specified and directed.
S & F repair Double action floor spring hydraulically regulator made up of minimum 1.25 mm thick aluminum alloy sheet foundation box main body with stainless cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.
S & F repair wall panelling of plastic vinyl composite of size 3050 x 254 x 8 mm thick with wooden/plane surface waterproof , termite proof, chemical resistant of light weight fixed with wooden screw with rawl wall plug complete all as specified and directed.
S & F in repairs wooden flooring (make signature) size 1215 x 195 mm and thickness 8.3 mm direct pressure laminated according to EN 13329 for glueless installation heavy domestic and light commercial use EN 13329 lavel of use 22 including under layer of 2 mm EP and polythene layer complete all as specified and directed.
S&F in repair aluminium powerded coated (minum 50 micron) anodised partition wall with aluminium frame of size : a) Single Groove Section: 100 x 40 x 1.20 mm thick b) Double Groove section: 100 x 40 x 1.10 mm thick duly fitted with neosprene rubber beading,frosted glass panes 4.8 mm nominal thickness or 12mm thick prelaminated melamine faced both sides decorative, exterior grade type II particle board panels including securing with 'U' channels at top joining partation complete all as specified and directed.
Cleaning of roof/ walls of any size buildings including complete removal plants grown with roots and treated with lime and filling the hole properly by cement mortar 1:3 complete all as specified and directed. Note: After completing the job user signature should be taken on record register
M&L for Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes with pressure jet machine, etc. exc all as spd and directed by engr-in-charge
Notes:- (a) Materials not included in sch of credit and debris from the dismantling having lowest value/Nil value shall be the property of department. The same shall be removed/ disposed or deposited by the contractor in MES stores yard of GE (West) Bareilly as directed for which no additional payment shall be made. The contracotor shall be fully responsible to safe guard these materials against losses/theft/deterioration etc till the same are deposited by him in MES Store yard (b) The contractor or his authorized representative shall attend office of AGE B/R for collection of complaints raised by user on regular basis and same has to be rectified /completed on requirement basis. If the contractors unable to rectify the complaints within stipulated time of 7 days (maximum), the penalty will be imposed to the contractor at the rate of Rs 500.00 per day for each complaint.
Notes:- (c) The above aspects shall be borne in mind by the tenderer while quoting the rates. The rates quoted by the tenderer shall be deemed to include the above aspects. (d) Tenderers may note that amount as given in schedule of credit will be deducted from the total amount to worked out the net contract sum at the time of Acceptance of tender.
M/S Harshri Nath Enterprises (BID ID -3339143)
Builders Harpal (BID ID -3338711)
RIYASAT ALI KHAN (BID ID -3333154)
Goel Enterprises (BID ID -3338704)
vipul nagaich (BID ID -3338447)
Mohit Enterprises (BID ID -3338940)
novell engineers (BID ID -3338439)
M/S Shree Sai Builders (BID ID -3339127)
SANJEEV ENTERPRISES (BID ID -3338441)
Bidder Name
JAI SRI RAM ASSOCIATE
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .