Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.6 LAccepted-AOC | L1 | Accepted-AOC Agreement executed on 01/06/2026 | |
| 2 | L2₹4.0 L+₹43,802 (12.3%)Rejected-AOC | L2 | Rejected-AOC Higher rate and hence not admitted | |
| 3 | L3₹4.2 L+₹60,859 (17.1%)Rejected-AOC | L3 | Rejected-AOC Higher rate and hence not admitted | |
| 4 | L4₹4.5 L+₹96,708 (27.1%)Rejected-AOC | L4 | Rejected-AOC Higher rate and hence not admitted |
| Sl No | Description | Qty | Unit | St George L3 | GEORGE ANTONY L2 | MANOJ THOMAS L4 | JAYAKRISHNAN P K L1 |
|---|---|---|---|---|---|---|---|
| 1.00Maintenance work | |||||||
| 1.00 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 0.57 | cum | 9,134 ₹5,178.98 | 9,200 ₹5,216.4 | 9,300 ₹5,273.1 | 7,795.15 ₹4,419.85 Lowest |
| 1.00 | 4.3.1:Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns | 7.56 | sqm | 381 ₹2,880.36 | 300 ₹2,268 Lowest | 300 ₹2,268 Lowest | 325.91 ₹2,463.88 |
| 1.00 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 1,076.79 | kg | 184.5 ₹1,98,667.76 | 177 ₹1,90,591.83 | 220 ₹2,36,893.8 | 157.87 ₹1,69,992.84 Lowest |
| 1.00 | 12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 209 | sqm | 832 ₹1,73,888 | 799 ₹1,66,991 | 810 ₹1,69,290 | 710 ₹1,48,390 Lowest |
| 1.00 | 12.4.2:Providing ridges or hips width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete.0.63 mm thick with zinc coating not less than 275 gm/m2 | 39.7 | metre | 931 ₹36,960.7 | 893 ₹35,452.1 | 1,000 ₹39,700 | 792.19 ₹31,449.94 Lowest |
Tender Value
₹4.2 L
EMD Value
₹10,574
Closing Date
11 Mar 2026, 6:00 pmClosed
Vishnu M M
Office of the Assistant Engineer, LIDEW Section, Manimala Grama Panchayat
Annual Plan-Pro No 124/26 Maintanance of Manimala FHC Building-Ward 14-General Civil Work
2026_LSGD_843350_1
05/2025-26/AE/LIDEW/MNLA
Open Tender
Civil Works - Buildings
Item Rate
360 days
Manimala GP
Please refer Tender documents.
8 documents required · 8 mandatory
₹935
Yes
₹10,574
Yes
4 Jun 2026
4 Mar 2026
12 Mar 2026
4 Mar 2026
11 Mar 2026
4 Mar 2026
Maintenance work
4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
4.3.1:Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns
50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
12.4.2:Providing ridges or hips width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete.0.63 mm thick with zinc coating not less than 275 gm/m2
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.32 MB
SBD.pdf
Tender Documents • 1.64 MB
BOQ_1423388.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .