PMMSY- Additional Infrastructure facilities at Kasaragod Fishing harbour Kasaragod - Designing fabrication, installation Testing and Commissioning of Mechanical Harbour Cleaning unit at Kasaragod Fishing Harbour Kasaragod - -General Civil Work

Amount

Mechanical work

OD5970/2023-2024:Supply and installation of portable type high pressure washer unit using plunger pump (Electrical) of minimum flow rate of 50 LPM at 150 Bar, powered by 10 HP 3 phase,50Hz motor with electric star delta starter, control panel, suitable Capacitor and protective device, and minimum 15m length PVC insulated copper cable. The pressure washing unit should include 1. Control Panel with starter and protective device 2. 3 Nos of washing hose reel and hose pipe kit with 3/8" high pressure delivery hose of minimum 40m length - should be installed at locations in auction hall as per the directions of the departmental officers at site. 3. 3 Nos Trigger operated Gun, SS lance of minimum length 900mm with Jet nozzle and adaptor for the delivery hose 4. Pressure regulating valve with bypass and Pressure guage 5. Trolley for pump and motor 6. 3 Nos of Cabinet for Hose reel, Gun and nozzle with suitable clamps and attachments for fixing on the pillars of the auction hall 7. A type Aluminium Telescopic Ladder of size 12 Feet x 12 Feet (9 + 9 steps) 8. Suction hose with Adaptors 9. Luggage Carrier of minimum capacity 500 kg - 1 Nos Washing unit with all accessories should be attached with a covered carrier having 4 cylinder 1197 CC Petrol Engine, Two wheel drive, capable of transporting minimum 5 men, dimension of 3675 x 1475 x 1825 mm, minimum fuel tank capacity of 32 liter (Preferred make Maruti Suzuki eeco 5 seater A/C) or equivalent), warranty for all accessories including battery ( with ceramic coating), under body coating, etc including vehicle registration charge and insurance charge, including necessary fittings including cost of all transportation, loading, unloading, steel and fitting charges etc complete as per direction of departmental officers at site

OD7543/2024-2025:Supply and Installation of 500 L rectangular type white colour water tank with SS bucket filter strainer for sea water, the set should be installed at each auction hall rate including cost of all materials, loading, unloading, fitting charges, etc complete as per direction of department officers at site

50.18.7.3.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 25 mm dia 10Kgf/ cm2- Internal work- Exposed on wall

OD7544/2024-2025:Supply and Installation of 2HP Monoblock Pump including suction hose as per site conditions MATERIAL OF CONSTRUCTION Motor Body - Cast Iron Impeller - Cast Iron/Gun Metal/Stainless Steel Delivery Casing - Cast Iron Shaft - Stainless Steel SPECIFICATIONS Phase - 3 & Oslash; POWER - 1.50 KW / 2.00 HP, SUCTION SIZE (IN MM) 65, DELIVERY SIZE (IN MM) 50, RATED VOLTAGE (VOLTS) - 415V, SPEED (RPM) - 2860, FREQUENCY (IN HZ) - 50, NO. OF STAGES -1, DISCHARGE - 4 LPS at 16 m of water, SEALING Mechanical Seal Rate including cost of all materials, conveyance, loading, Unloading, civil works etc complete as per direction of departmental officers at site.

50.18.7.6.1:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 50 mm dia 10 Kfg/cm - Internal work- Exposed on wall

OD7547/2024-2025:Providing and Fixing 25 mm PVC ball valve to be installed at locations above water tank as per the direction of department officers at site. Rate including cost of all materials, labour charges, fitting charges, etc complete

HI-TECH SERVICES (BID ID -2121643)

Bidder Name

HI-TECH SERVICES

DCS TECHNO SERVICES PRIVATE LIMITED