Others

Brick Masonary 2nd Class Ground moulded or traditional size 23x11x7 Cm in Cement Mortor 1:6 Prop including cost & conveyance of all materials like Cement, Sand, Bricks, Water, etc., including all labour charges like mixing Cement Mortor, scaffoding charges lift charges, curing charges etc., complete for finished item of work.

11.5 cm wide Brick masonry for super-structure on ground floor in cm (1:3) using second class traditional size bricks including cost of all materials, labour and all operations for constructing half brick masonry, mixing cement mortar, curing etc., complete for finished item of work as directed by the Engineer in Charge

Plastering with 12mm thick in single coat in CM (1:4) finished smooth including cost and conveyance of all materials to site, finishing, curing, scaffolding and all operational, incidental, labour charges etc., including cutting grooves where ever necessary etc., complete for finished item of work. (As per SS 903).

Providing and applying Acrylic Emulsion paint finish to walls, partitions, ceiling surfaces of approved make, colour, texture and shade in two coats (surface and finish acceptable to the Architect/Project Manager must be achieved by the contractor within two coats and any additional coats if required shall be at the cost of the contractor), including preparing existing surfaces by scraping away any loose particles, dust etc. by washing & scrubbing, filling up with crack filler, binder; cleaning and making the surface dust-free, applying water based RJ London putty as directed and rubbing with sandpaper to make surface smooth and applying 1 coat of primer as recommended by approved paint manufacturer, including required scaffolding, cleaning and protecting till the handing over of site, also masking/ protecting to be done for all service devies like switch board, detectors etc. all complete at all heights and leads as per specifications or as directed by the Architect/PM.

Supplying and fixing 12 mm thick toughened glass door of approved make and quality, including providing and fixing approved hardware such as patch fittings, floor spring, handles, locks, stoppers, clamps, hinges etc., complete with cutting, drilling, edge polishing, alignment and fixing in position, as per specified sizes, standard specifications and as directed by the Engineer-in-Charge, complete in all respects - A) Single leaf - 3' x 7'

Supplying and fixing 12 mm thick toughened glass door of approved make and quality, including providing and fixing approved hardware such as patch fittings, floor spring, handles, locks, stoppers, clamps, hinges etc., complete with cutting, drilling, edge polishing, alignment and fixing in position, as per specified sizes, standard specifications and as directed by the Engineer-in-Charge, complete in all respects - B) Flush Door - 2'9" x 7' (Toilet)

Supplying and fixing 12 mm thick toughened glass door of approved make and quality, including providing and fixing approved hardware such as patch fittings, floor spring, handles, locks, stoppers, clamps, hinges etc., complete with cutting, drilling, edge polishing, alignment and fixing in position, as per specified sizes, standard specifications and as directed by the Engineer-in-Charge, complete in all respects - C) Sliding Door - 3' x 7'

Supplying and fixing 8 mm thick toughened glass window of approved make and quality, including providing and fixing approved hardware such as hinges, handles, stays, fittings and accessories, complete with cutting, drilling, edge polishing, alignment and fixing in position, as per specified sizes, standard specifications and as directed by the Engineer-in-Charge, complete in all respects - A) UPVC - 5' x 5' (W)

Supplying and fixing 8 mm thick toughened glass window of approved make and quality, including providing and fixing approved hardware such as hinges, handles, stays, fittings and accessories, complete with cutting, drilling, edge polishing, alignment and fixing in position, as per specified sizes, standard specifications and as directed by the Engineer-in-Charge, complete in all respects - B) UPVC - 2'4"x 4' (W1)

Supplying and fixing 8 mm thick toughened glass window of approved make and quality, including providing and fixing approved hardware such as hinges, handles, stays, fittings and accessories, complete with cutting, drilling, edge polishing, alignment and fixing in position, as per specified sizes, standard specifications and as directed by the Engineer-in-Charge, complete in all respects - C) Ventilator - 1'8" x 1'8" (Toilet)

Supplying and fixing suspended grid type false ceiling of approved make, using GI grid system comprising of main runners, cross tees, wall angle/perimeter channels, ceiling hangers with dash fasteners, including providing and fixing ceiling tiles/boards, cutting, leveling, alignment, scaffolding and all incidental charges, complete as per standard specifications and as directed by the Engineer-in-Charge

Supplying and fixing display storage units of approved design and make, fabricated from approved materials, including shelves, shutters/drawers, necessary fittings and accessories, complete with providing and fixing internal ambience lighting using LED fittings with wiring, connectors and switches, including cutting, fixing, finishing and making good the surfaces, complete as per standard specifications and as directed by the Engineer-in-Charge

Supplying and fixing table of approved design and make, overall dimensions 5’ × 2’ × 3.5’, fabricated from plywood and finished with approved laminate, including storage pedestals, electrical provisions (power outlets and cable management), integrated light provisions, and Corian top finish, complete with all fittings, accessories, cutting, fixing, alignment, finishing, and incidental works, as per standard specifications and as directed by the Engineer-in-Charge

Supplying and fixing queen size bed of approved design and make, of overall dimensions 1800 mm × 1500 mm, fabricated from approved materials, including bed frame, headboard, necessary fittings and accessories, complete with fixing in position, finishing and all incidental charges, as per standard specifications and as directed by the Engineer-in-Charge.

Supplying and fixing coffee table with two chairs of approved design and make, fabricated from approved materials, including all fittings and accessories, complete with placing/fixing in position, finishing and all incidental charges, as per standard specifications and as directed by the Engineer-in-Charge

Supplying and fixing couch/sofa of approved design and make, fabricated from approved materials, including cushions, upholstery, necessary fittings and accessories, complete with placing/fixing in position, finishing and all incidental charges, as per standard specifications and as directed by the Engineer-in-Charge - 3-Seater

Supplying and fixing couch/sofa of approved design and make, fabricated from approved materials, including cushions, upholstery, necessary fittings and accessories, complete with placing/fixing in position, finishing and all incidental charges, as per standard specifications and as directed by the Engineer-in-Charge - Single Seater

Supplying and fixing of chairs and make, fabricated from approved materials, including all fittings and accessories, complete with placing in position and all incidental charges, as per standard specifications and as directed by the Engineer-in-Charge. - Boss Chair

Supplying and fixing of chairs and make, fabricated from approved materials, including all fittings and accessories, complete with placing in position and all incidental charges, as per standard specifications and as directed by the Engineer-in-Charge. - Waiting Chairs

Supply and installation of Modular Nylon Carpet with 100% Solution Dye Nylon, Tufted loop & Multi level loop, with Yarn weight of 900 GSM (30 Oz/ sq.yd) and total tile weight min 3600 gsm, Tile Density 8900 gram per cubic meter or above, pile height 3.5-3.75 mm and tile total thick ness 6.25-6.75Nmm, with Primary backing of Multi layer Ecolyte PVC and Fiber Glass back as secondary backing of Size 50 X 50 cm or 25 x 100 cm and the product when tested and certified complying the (a) Indoor Air Quality - GLP2526 , (b) CRI Green label certificate for LEED Building points, (c) Flooring Radiant Panel - Class1 (ASTM E-648, Made in India, (d) Smoke Density - Less than 450 (ASTM E-662) Less than 3.5 kV (AATCC-134), (e) Lightfastness - Pass and with a Product Warranty 10 Years, (f) Surface Flammability of Carpets and Rugs (ASTM D2859), including installation of carpet tile on a level surface (existing VDF/ tiled floor) using High quality, low VOC water soluble adhesive (Pedilite) and protected with 2 Layers of 50 micron sheets to avoid soiling and 1 time vacuumed cleaning before handover, etc complete for finished item of work.

Supplying and fixing wall paneling using approved make vinyl-backed panels, including necessary framework/supports, adhesives, fixing accessories, jointing, finishing, and making good the surfaces, complete as per standard specifications and as directed by the Engineer-in-Charge - Vinyle back Panels - 15 Sqm

Supplying and fixing wash basin of approved make and quality, including providing and fixing CP brass fittings such as pillar tap/mixer, waste coupling, bottle trap, PVC/CP connections, brackets, cutting and making good the wall/floor, testing and commissioning, complete as per standard specifications and as directed by the Engineer-in-Charge

Supplying and fixing water closet (WC) of approved make and quality, including providing and fixing necessary CP brass fittings such as flush valve or flushing cistern, inlet and outlet connections, PVC/CP fittings, brackets, cutting and making good the wall/floor, testing and commissioning, complete as per standard specifications and as directed by the Engineer-in-Charge

Supplying and fixing faucet/tap of approved make and quality, including providing and fixing all necessary fittings, connections, brackets, washers, jointing materials, testing for proper functioning, and making good the wall/floor, complete as per standard specifications and as directed by the Engineer-in-Charge.

Supplying and laying floor/wall tiles of approved size, make, and shade, including necessary surface preparation, providing and applying approved adhesive/cement mortar, jointing with matching grout, cutting to shape, leveling, cleaning, and all incidental works, complete as per standard specifications and as directed by the Engineer-in-Charge

Supplying and fixing approved fixtures of specified type and make, including all necessary fittings, supports, accessories, connections, cutting, making good the surface, testing and commissioning, complete as per standard specifications and as directed by the Engineer-in-Charge

Supplying and fixing window blinds of approved make and type, including all accessories such as brackets, channels, cords/controls, complete with providing and fixing necessary carpentry work for mounting/boxing wherever required, including cutting, fixing, alignment and finishing, complete as per standard specifications and as directed by the Engineer-in-Charge

Mis: UGD Pipeline and Visitors lounge