Estimate for Repair and Maintenance of Ziledari Faridkot and Ziledari Mudki Office Buildings within Canal Colony, Faridkot

Amount

Dismantling brick work tile, masonry or tile lining In cement

Removing Doors and Windows (Steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled. (a) Doors of area 3 sqm and below.

Removing Doors and Windows (Steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled. (b) Windows of area 3 sqm and below.

Scraping - cement plaster

12.5 mm thick cement plaster 1:4

Supply & Fixing of pressed steel frames (Chowkats) consisting of 18 gauge (1.25mm) thick steel sheet of the specified section(standard design latest) including iron lugs (hold fasts) iron hinges, confirming to P.W.D. specifications including bolts for fixing stops, lock- notch provision for receiving tower bolts, Hydraulic spring and finished with one priming coat of approved quality, fixed in position, including the cost of cement concrete 1:3:6 for filling in the frame and cement concrete 1:2:4 for lugs complete.Doorsandwindowsframeof size151mm x60mmwith35mmwidedouble rebate weighing 3.95 kg per meter.

Wire gauge Hollock wood door shutter without springs housed in chowkhat. - 35 mm thick

Hollock wood doors shutter windows shutter including hinges, screws, chocks,cheats, stopscords etc. complete fixed in position panelled, glazed or glazed and panelled. 35 mm Thick

Hollock wood cup board shutter with plywood panels or faced on both side fixed in position (excluding the cost of handles, bolts hasp with staple but including the labour for fixing them) 30mm thick

Cost of aluminum fittings complete for doors, windows such as tower bolts, handles, Stoppers and screw etc. for these fittings (Excluding sliding bolt) For shutter area above 0.50 sqm

Providing and fixing aluminium sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : b) 250mm x 16mm

Providing and fixing helical door spring 150mm (superior quality) including necessary screws, complete Iron Helical spring

Wrought iron & Mild steel ladders, framed grills, gratings etc. with ends of bars riveted or molded forged framed window guards, barred iron doors stair case iron railing etc. including cost of bolts and nuts, screws, welding rod complete fixing in position

Preparation of plywood surface for painting including sand papering the surface and applying filling with approved quality fillers consistingofwhite lead, linseedoil,Varnish, andChalkMitti includingfinishingthesurfac to required finish complete

Applying pink primer or aluminum priming coat on wood work including preparation of surface knotting and stopping etc

Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade

Curtain rod 25mm dia aluminum pipe with brackets fixed in position including nails and screws etc.

Dismantling cement conglomerate floors 25mm to 50mm thick including concrete base.

Providing and laying vitrified floor tiles of different sizes in light colour shades made using Double Charge technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete Size 600x600 mm

Grouting the joints of flooring tiles having joints of 3 mm width, using 2mm to 3 mm gap using spacers and later this gap to be filled with cement based grout ) with Cement base grout and matching pigments etc., complete, including filling / grouting and finishing complete as per direction of Engineer-in-charge. Size 600x600 mm.

Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/ Highlighter/ emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shadesexcept burgundy, bottlegreen, black of size 600x300mm as approved by Engineer-in Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1cement: 4 finesand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Dismantling brick or flagged stone flooring without concrete base.

Precast P.C.C. tiles conforming to IS1237-1980, 30cmx30cmx2.5cm in ordinary grey cement without chips laid on 20 mm thick bed of cement mortar 1:3 with neat cement slurry between joints and over the base for floors, treads of steps and landings

Regrading terracing of mud plaster covered with tiles or bricks in cement by dismantling tiles or bricks, removing mud plaster, preparing the surface of mud plaster to proper, slope, relaying mud plaster Gobri leaping and tiles or bricks grouted in cement mortar 1:3 (1 cement and 3 fine sand) including replacing unserviceable tiles, or bricks with new over and disposal of unserviceable material to the dumping ground within 50 m lead (The cost of new tiles or bricks excluded).

Supply and laying of Polythene films/sheet of 250 micron

Cost of new Tiles 22.86cm X 11.43cm X 3.81cm hand moulded at kiln site for all Districts, to be replaced in place of broken tiles in regrading of tile terracing including loading , unloading and all leads as desired by Engineer in charge

Cement concrete 1:2:4 gola 10cm x 10cm concave quadrant along junction of roofs with parapet wall finished smooth, where specially specified.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes (working pressure 4 kgf/ cm²) conforming to IS : 4985, including fixing with MS Clamp U-PVC pipes (working pressure 4kgf. / sqcm) pipe 110 mm dia.

Providing and fixing 110 mm dia. U.P.V.C bend for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge. UPVC 110 mm bend

Top khurra 0.6m x 0.6m for rain water pipe in 25mm thick cement concrete 1:2:4 over 50mm thick cement concrete 1:8:16.

Providing and fixing in position gratings 150mm x 150mm for gully trap. PVC grating

Boring with casing pipe for tubewell in all soils except ordinary hard rocks requiring blasting including removing the casingpipe after the tube well is lowered & tested , equipment as requried such as hand boring machine and its accessory, transportation to site and vice versa etc. complete in all respect. Boring with 150mm id Housing Pipe Upto 150 m depth BGL.

Supplying & fixing of M.S Clamp of size 150mm X 12mm made out of MS Flat 1.52m long, suitable to fit Housing pipe including the cost Nut & Bolts of Suitable size complete in all respect.

Supplying, assembling, lowering and fixing in vertical position in bore well,unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818-2010, including required hire and labour charges, fittings&accessoriesetc.allcomplete, forall depths, as per direction of Engineer– in-charge (a) 100 mm nominal size dia.

Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS:12818, including hire& labour charges, fittings &accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. (a) 100 mm nominal size dia.

Providing and placing in position hand pump of approved quality for 40mm dia metre G.I. pipe complete with all accessories.

Providing & placing in position on terrace (at all floor levels) HDPE water storage tanks of approved make (to the approval of Engineer - in-charge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flo pipes but without fittings and base support for tank. For Tripple Layer Tanks

CONCEALED IN WALL: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)pipes as per IS15778 (ISI marked with the prior approval of Engineer-in- Charge),having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00mspacing including jointing of pipes & fittings ,with one step CPVC solvent cement and testing of pipes complete as per direction of Engineer-in-Charge. CPVCSDR11 Pipe & fitting 25mm o/d

Providing and fixing in position automatic brass Ball Cock in tanks - Plastic Ball Cock with rod and Plastic Ball (iii) 20mm i/d

Providing & Fixing in postion stop cock / Angle valve of approved make (to the approvalofEngineer-in-charge) complete in all respect. - (d) C.P.brass 20mm concealed stop cock with flange

Providing & Fixing in postion C.I. bib cock as per IS:210 with stainless steel spindle of approved make (to the approval of Engineer in-charge ) complete in all respect. (ii) 20mm i/d

Providing and fixing in position 15mm C.P. Pillar cock foam flow of approved make (to the approval of Engineer-in-charge)

Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) consisting of C.P. brass waste 32 mmdia withoneC.P.brasspillar tap including Rack Bolt Screw Pair 115mm long complete in all respect. Size 630 mm x 450 mm x 830 mm

Providing and fixing vitreous chinaware pedestal of approved make (to the approval of Engineer-in-charge) for wash hand basin complete in all respect.

Supply and installation of garden bench (a)Chair type garden bench with L-shaped sidesmade of reinforced concrete (M 30), thickness 100mm, overall height 1000mm,basewidth620mm.Backand seat shall consist of 5Nos. reinforced concrete planks 1500mmx100mmx50 mm one plank 1500mmx200mmx50 mm. Seating height of the bench shall be 450mm. The bench shall be fixed with nuts on concrete mount,all holes sealed after assembly and installation

AUTOMATIC VOLTAGE STABLIZER: Supply and erection of Single phase copper wound Automatic voltage stablizer of suitable capacity electronically controlled circuit with input voltage 140-260 volts single phase AC supply and output voltage 220 ± 5% volts single phase AC supply having main silicon core copper wound step up transformer with suitable nos. of turns on primary side and secondary side the transformer should be fully insulated inside the MS sheet box of suitable size. There should be power control relay and single pole MCB (C-curve, 10kA) of suitable capacity complete with internal copper wiring along with amp. meter and volt meter, high voltage cut off 280 volt input (240 volt output) and 90 volt maximum boost and overloading protection to be provided: - Automatic Voltage Stablizer 5 KVA

G.I. EARTHING: Earthing with G.I. wire/ rope in G.I. pipe partly recessed and partly on surface complete with 150cm long 50mm dia. G.I. earth pipe (Cutting threads and 36 Nos. holes, 1cm dia. to make a mesh around the GI Pipe) with G.I. reducing socket including erection of the same, 4.50 metre (14.76 feet) below ground level with 20Kg. charcoal & salt mixture etc., up to 8 metre in length (including boring & refilling). - Earthing with 8 S.W.G. (4mm dia.) G.I. wire in 15mm dia G.I. pipe with G.I. reducing socket 50mm x 15mm (upto 8Metre in length)

SHEET METAL DOUBLE DOOR DISTRIBUTION BOARD FOR MCB's/ RCBO's/ RCCB's:Supply and erection of sheet metal Double Door Distribution Boards IP 43- IK09 metal door (dust protected) as per IS 8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars, shrouded neutral bars, earth bars, cement spill protector, color?coded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting miniature circuit breakers/ RCBO's/ RCCB's in the distribution board (For SP&N distribution board with provision DP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings and for TP&N horizontal distribution board with provision TPN/ FP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings) as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc:- SP&N Double Door Distribution Board 8 way each

MINIATURE CIRCUIT BREAKERS:Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:- MCB Single Pole 6-32amp. (10kA, Curve-C)

MINIATURE CIRCUIT BREAKERS:Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:- MCB Double Pole 50, 63 amp. (10kA,Curve C)

PVC INSULATED FR COPPER CONDUCTOR CABLES:Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:- Overall size 2.5sq.mm (Un-sheathed)

PVC INSULATED FR COPPER CONDUCTOR CABLES:Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:- Overall size 1.5sq.mm (Un-sheathed)

RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES : Wiring light point

RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES : Wiring fan point (Without fan box)

RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES : Wiring 6Amp. wall socket point

RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES : Wiring 16/20Amp. power plug control point

Wiring Computer terminal point having 3 Nos. 6Amp. 2/3 universal socket (shuttered), 1No. 16/20Amp. Universal Socket (shuttered), 2Nos.16/20 Amp.switch with indicator and 2 Nos. blanking plate (Modular accessories)

Scraping White wash and colour wash

Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish

Distempering with Acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade

Finishing walls with cement based water soluble exterior paint such as snowcem, robbiacem etc. Two or more coats to give an even shade

Providing Monoblock Pumps 1 hp complete for bore

Providing Inverter 900 va with battery 200ah

Providing heavy office Curtains

Providing ceiling Fans 1200 mm

Providing LED Tubelight batten 20 watt

Providing LED bulb 18 watt

Providing Street Lights 24 watt

Providing Exaust Fans 300mm

Any other Item

G M DEVELOPERS GROUP