SABARIMALA PILGRIMAGE 2022-2023-maintenance of Irrigation structures like check dam ,office building etc

Amount

Apendix A-Camp shed

OD16047/2022-2023:Engaging Carpenter for replacing or maintaining damaged parts of wooden shutters for VCBs and windows, ventilators at Irrigation camp office at pampa, with old wood available at camp office as per the direction of the departmental officers at site.

OD16048/2022-2023::Engaging an electrician to the Irrigation office building for the minor repairs and replacing damaged accessories of the electric lines if necessary as per the direction of the departmental officers at site.

OD16049/2022-2023:supplying coolie for assisting Electrician

OD16050/2022-2023:od32031/2021_2022/IA :Engaging a plumber/pipe fitter to the Irrigation office for cleaning, removing and refixing the water supply lines and sewage lines of the office building whenever required in sabarimala pilgrimage season as per the direction of the departmental officers at site

OD16051/2022-2023:Supplying coolie for assisting plumber for irrigation office building

9.124.1:Providing and fixing factory made 30 mm thick door shutter made of solid PVC foam profile. The styles & rails shall be of size 75 mm x 30 mm having wall thickness 5 mm. The styles, top & bottom rails shall have one side wall thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power. The styles and rails shall be reinforced with M.S. tubes of size 33 mm x 17 mm x 1 mm, painted with primer, all four corners of reinforcement to be welded or sealed. Solid PVC extruded bidding (Push fit type) will be set inside the styles and the rails with a cavity, to receive single piece extruded 5 mm PVC sheet as panel. The styles and rails will be mitred cut and joint with the help of PVC solvent cement & self driven self tapping screws. Single piece extruded solid PVC lock rails of sixe 100mm x 30 mm with wall thickness 5 mm & 15 mm integrally extruded in the middle of the lock rail & fixed with styles with the help of PVC solvent cement & self driven self tapping screws of size 100 mm x 8 mm complete as per manufacturer's specifications and direction of Engineer -in-charge.Non decorative finish

Appendix-2-Maintenance of VCBs

OD16056/2022-2023::Engaging Chowkidar /coolie for cleaning coupe roads to VCBs, bathing ghats, steps and Nunungar mouth portion before sabarimala season as per the directions of the departmental officers at site.

OD16057/2022-2023:Engaging wood cutter / Coolie for cutting and removing obstructed wood in the coupe roads, vent ways of VCBs through out the season etc. complete as per the directions of the departmental officers at site

2.1.1:Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m and lift up to 1.5 m, disposed soil to be levelled and neatly dressed:All Kinds of soil

13.53.1:Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to given an even shade:New work (two or more coats) including coat of approved steel primer but excluding a coat of mordant solution.

14.53.1:Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:One or more coats on old work

OD16089/2022-2023:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth to the specified location as directed by the department officers at site, disposed earth to be levelled and neatly dressed.All kinds of soil

11.20.2:Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand).Medium shade pigment using 50% white cement 50 % Grey cement

13.33.1:Pointing on stone work with cement mortar 1:3 ( 1 cement : 3 fine sand):Flush/ Ruled pointing

Existing Shower Maintanance

50.18.7.2.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge 20 mm dia 10 Kgf/cm2- Internal work - Exposed on wall

OD16165/2022-2023:Providing and fixing pvc ball valve with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 63 mm dia - External work - Exposed on wall

OD16159/2022-2023::Providing and fixing steel shower with 15 or 20 mm inlet:<br>100 mm diameter Details of cost for one no

OD16160/2022-2023::Providing and fixing brass threaded ball valve and testing of joints complete as per direction of Engineer-in-Charge -20 mm dia - External work - Exposed on wall

OD16161/2022-2023:Engaging Coolies for cleaning purpose in shower area

OD16162/2022-2023:Engaging Plumber for shower line repair work as per the direction of department officers at site

OD16164/2022-2023:Engaging mason for shower repair works

OD16158/2022-2023:Supplying Blacksmith for repair work to the shower structure and extend the shower head etc. complete as per the directions of the departmental officers at site.

50.18.9.9.2:Providing and fixing PVC pipes includes joints of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in CHarge. 110 mm dia 4 Kg/cm2

50.18.9.7.2:Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.63 mm dia 4 Kgf/cm2

50.18.9.20.5:Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes including jointing with PVC solvent cement - 63x63x63 mm dia Tee

50.18.9.20.8:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63 mm dia End cap

50.18.9.20.9:Providing and fixing PVC moulded fitting / accessories for Rigid PVC pipes, including jointing with PVC solvent cement-63 mm dia Socket /coupling

SAJAN P MATHEW

Bidder Name

VARGHESE MATHEW

SAJAN P MATHEW