Rajkot Division: Provision of various passenger amenities and S&T utility shifting work in connection with soft upgradation/ improvement of Amrit Station Scheme at RJT station.

A-Supply of IPIS Items

Supply of Double Face Coach Guidance Display Board with all necessary accessories confirming to system requirement as per RDSO Specification No. RDSO/ SPN/ TC/108/2019 Rev.2.0 with Amdt -1 or latest. Inspection By- RDSO as per technical specification of tender document.

Supply of Single line double faced Train Arrival/Departure Display Boards as per RDSO RDSO/SPN/TC/108/2019 Ver 0.0 with Amendment 2.0 or latest as per technical specification of tender document.

Supply of Central Data Switch/ Platform Data Controller as per RDSO specification no. RDSO/SPN/ TC/ 108/ 2019,Ver. 2.0, Amdt.- 1 or latest and as per instruction of Engineer incharge. Inspection By- RDSO as per technical specification of tender document.

Supply of At-a-glance display Board (AGDB) Double Face(Mono colour) as per RDSO spec. No. RDSO/SPN/TC/108/2019 Ver-2.0 or latest. As per technical specification of tender document.

Supply of power cable 3 core, 2.5 sq mm, multi strand [36/0.3mm dia.] cable as per technical specification of tender document.

Supply of power cable 3core 4 sq mm multi strand copper cable as per technical specification of tender document.

Supply of STP CAT6 Cable 1 Box= 305 mtr (Appx.) as per technical specification of tender document.

Supply of Rigid PVC Conduits having Outer dia. 25mm & lnner dia. 21.40 mm, Thickness 1.6mm As per technical specification of tender document.

Supply of HDPE Duct minimum 25 mm dia with all fitting and laying accessories: Standard ISI mark as per technical specification of tender document.

Supply of 6 CORE FIBER Optic Fibre cable as per technical specification of tender document.

Supply of basic material to construct unit maintenance free earth as per technical specification of tender document.

Supply of Class B & C Surge protection Device (SPD) -Type I & II with Visual Indication and Potential free contact to remote monitoring as per technical specification of tender document.

55 inch 4K,UHD smart TV with 2 HDMI,1 USB(Min) Ethernet, inbuilt Wi-Fi/Wi-Fi direct, Industrial grade TV of make LG/Samsung/ SONY. As per technical specification of tender document. 1023062.5

Supply of True color Indoor Video Display/ Advance Video Display Board as per RDSO specification No: RDSO/SPN/TC/108/2019 Ver 2.0 or latest. As per technical specification of tender document. 1615071.5

Supply of True colour MLDB (Outdoor Video display)/ Video Display Board of 6 Line for Train Arrival departure Display Board (TADDB) No. RDSO/SPN/TC/ 108/2019, Ver, 2.0 or latest. Inspection: RDSO. As per technical specification of tender document.

supply of optical to ethernet media converter for single mode single fiber as per RDSO specification RDSO/SPN/TC/103/2013 rev 2 or latest of make Dlink/ TP link/ Tenda. As per technical specification of tender document.

B-Execution of various IPIS Items

Installation & Commissioning of double face coach guidance display boards/Speaker as supplied under schedule A, in open area. It includes Supply, hanging arrangement of coach indication board/speaker along with hood [Cover shed] in open space, [without shed feet's long 1 [1:3:6] I area] 100 mm mm dia [OD] & 15 G.I. to be erected with concrete foundation of 3 Feet deep from platform level and on the pipe, an angle to be fixed on G.I. pipe as per site condition. Contractor to supply all required materials with G.I. pipe & G.I. sheet of 2 ft x3 ft which should be placed on the top of the board in open space as per approval of site engineer with angle fastening and crow guard. Supply of G.I. pipe included in this. Inspection By-Consignee as per technical specification of tender document.

Installation, Testing and Commissioning of Double Faced Coach Guidance Display 2 Boards in Covered area with complete accessories as per RDSO Specification No. RDSO Specification No. RDSO/ SPN/ TC/ 108/2019 Rev.2.0 with Amdt -1 or latest Inspection By-Consignee. As per technical specification of tender document.

Installation & commissioning of Single line double faced Train Arrival/Departure Display board. This includes all required accessories required including hanging structure for fixing arrangements to commissioning the item. As per technical specification of tender document.

"Installation, testing and commissioning of Central Data Switch/Platform Data Controller as per RDSO specification no. RDSO/SPN/ TC/ 108/ 2019,Ver. 2.0, Amdt.- 1 or latest and as 4 per instruction of Engineer incharge. All required material [except CDS/PDC] for fixing the CDS/ PDC are to be arranged by the contractor. Installation and commissioning of Platform Data Controller (PDC)as per instruction of site engineer. Inspection By- Consignee" as per technical specification of tender document.

Installation, testing and commissioning of At-a glance display Board (AGDB) (MonoColour) Double face as per RDSO Spec. No. RDSO/SPN/TC/108/2019 Rev.2.0 or Latest as per technical specification of tender document.

"Installation testing and Commissioning of True colour MLDB (Outdoor Video display)/ 6 Video Display Board of 6 Line for Train Arrival departure Display Board (TADDB ) No. RDSO/SPN/TC/108/2019, Ver.-2.0. This includes supply of all required material for Outdoor Installation." as per technical specification of tender document.

"Installation, Testing and commissioning of True Colour Video Display (Advance Video Display Board (AVDB) for indoor) as per RDSO specification No: RDSO/SPN/TC/108/2019 Ver 2.0 or latest. As per technical specification of tender document. " Running

Laying of OFC/Power cable/CAT-6 cable/PA cable/Data cable and all the other types of telecom cable through HDPE pipe/casing capping/fall ceiling with laying/fixing of HDPE pipe/casing capping/uPVC pipe for connecting/interfacing various components and system integration. As per technical specification of tender document.

Installation of Unit Maintenance Free Earth as supplied As per technical specification of tender document.

Cutting of the platform surface (Tile/Slab) for a depth of 25cm and a width of 10cms 10 and refilling/Reconditioning/ Concerting/Repairing the platform after laying HDPE pipe and cable. Cutting should be done with marble cutting machine in proper manner and restore the same as before in such a manner that aesthetic of the platform is not disturbed. As per technical specification of tender document.

"Installation and commissioning of various Classes of lightening cum surge protection 11 device as decided by site engineer. This include supply and fixing of any other material required to complete the installation & commissioning of lightening cum surge protection device. " As per technical specification of tender document.

Supply & Installation of 9U rack with all accessories as per technical specifications of tender document.

Supply of 12 port rack mountable LIU along with all accessories with installation as per technical specification of tender document.

Supply of 24 port Rack mounted LIU along with all accessories with installation as per technical specification of tender document.

Interfacing and Modification in software suitable for existing system software Spec RDSO/SPN/TC/61/2015 Ver 4.0 to Spec No: RDSO/SPN/TC/108/2019 Ver 0.0 as per technical specifications of tender document.

Supply of Industrial grade 24x7 TV of 43" LG, samsung or sony as per technicla specification of tender document.

"Supply of professional large format industrial grade 4K LED display unit size 65""resolution 3840X2160, 450nits (UHD) including all fixing accessories with installation , (port) USB/LAN/HDMI/VUA/Video out. As per technical specifications capable of working 24x7."

Supply of MS cabinet for housing of 1no. Of LED/LCD VDU duly black colour powder coated with 4mm toughened glass at front & its standard installation with VDU as per technical specification.

supply and installation of interface unit for train charting/ coach position from server and display to the TV as per technical specification of tender document.

Supply and installation of 150mm width x50mm depth x 1.6mm thick size perforated 21 GI cable tray including horizontal and vertical reducers, tees, crossmembers and other accessories as required and duly suspended from the ceiling with GI suspenders etc with yellow colour painting or marking as required, as per technical specification of tender document.

"Supply & installation of PC WorkStation /Maintenance Console FHD Resolution LED for Viewing, Monitoring and System Management including all required Licenced Software, like MS Client Software, OS MS-office, Anti-Virus 1000 VA UPS etc as per technical specifications."

Supply, Installation, testing and Commissioning of on line UPS 5 KVA, with battery back up of minimum 4-6hours, with battery trolley, of reputed make as per technical specifications.

Supply and installation 1KVA/168VAH on line UPS(Single Phase) with 1 Hour Backup and all the accessories required for installations, as per technical specification of Tender document.

Supply installation and commissioning of auto media change over as per Technical specification of tender document attached. Make: MRO-TEK MAPLE 4C (O) (V4) or similar. Warranty up to 36 month

Supply & fixing of 38 mm PVC Casing-Capping as per technical specification of tender document.

C-Supply and installation of PA SYSTEM, GPS CLOCK and other items

Supply of I/O Box Punching tool as per technical specification of tender document.

Supply & Installation of Weather proof Self Amplified IP Speaker with mounting arrangement as per technical specification of tender document.

Supply , Installation, Testing & Commissioning of PA IP Controller (It consists of two Servers Active & redundancy Server in stand by mode with licenses) as per technical specification of tender document.

Supply of Single mode LC-LC/LC-SC optical patch cord as per technical specification of tender document.

Supply of 10 pair 0.5mm annealed copper conductor PVC insulated switch board Telephone cable as per technical specification of tender document.

Suppy & installation of CAT6 Surface mountinfo-outlet as per technical specification of tender document.

"Supply o f Microphone for general PA with connector & 6 mtr screened cables all necessary accessories as per Technical Specifications"

"Supply of microphone stand all necessary accessories as per RDSO Spec. No. RDSO/SPN/TC/63/2006 Rev.0.0 or latest and conforming to as per Technical Specifications"

Supply of VOIP PHONE with POE, power adapter and features like Hold, transfer, 9 forward, 5-way conference, call park, call pickup, shared-call-appearance (SCA)/bridged-line- appearance (BLA), downloadable phonebook (XML, LDAP, up to 2000 items), call waiting, call log (up to 800 records), as per technical specification of Tender document.

Supply, Installation, Testing & Commissioning of 48 Port FXS Gateway(Analog gateway), as per technical specification of Tender document.

Supply of 8 Port FXS Gateway including mounting kit and allot her accessories. Its standard installation would be as per technical specifications.

Shifting of Existing cable and fix in cable tray at platform, Fob. Type of cables PIJF Cable, data cable, power cable, PA cable and other S&T cables.

Release of old and defective unused cable from Plafform ,Fob & Shed as per technical specification of tender document.

Supply of Standard 19"Rack Mountable LER(Label Edge Router),IP- MPLS Router with Redundant DC powerfeed-48V DC nominal, As Per RDSO Document No. STT/TAN/IP-MPLS/2020 Ver 3.0 with amendment no. 1 or latest and as per specification of Tender document.

Supply of casing capping of size 75 mmx 50 mm as per technical specification of tender document.

Supply of power cable 3 core 4 sq mm multi strand copper cable as per technical specification of tender document.

Supply of power cable 3 core, 2.5 sq mm, multi strand [36/0.3mm dia.] cable as per technical specification of tender document.

Supply of STP CAT6 Cable 1 Box= 305 mtr (Appx.) with identification mark /ferrules etc. As per technical specification of tender document.

Supply of Rigid PVC Conduits having Outer dia. 25mm & lnner dia. 21.40 mm, Thickness 1.6mm with As per technical specification of tender document.

Supply of HDPE Duct minimum 25 mm dia with all fitting and laying accessories: Standard ISI mark as per technical specification of tender document.

Supply of 6 CORE FIBER Optic Fibre cable as per technical specification of tender document.

Supply of GPS-Based Digital Clock Office Type as per technical specification of tender document.

Supply of Manageable layer-2 switch 24 ports POE with 4 SFP (Transceiver) Module up linking facility including installation as per technical specification.

Supply and Installation of Standard 19-inch Rack Mountable Layer 3, 24 Port Managed Switch with 24 Nos of10/100/1000 Ethernet Ports with POE +Support and Redundant AC 24 Power Supply, Dedicated Stacking Module 4 x10 GE SFP+ Ports for uplink including 4Nos of 10 GE BX SM SFP+ Modules, asper para number 4.0 of RDSO SPECIFICATION NO.RDSO/SPN/TC/83/2020 Rev 2 or latest. Mounting Kit with all necessary accessories to be supplied. Detailed Specification in Technical Document.

Cutting of the platform surface (Tile/Slab) for a depth of 25cm and a width of 10cms 25 and refilling/Reconditioning/ Concerting/Repairing the platform after laying HDPE pipe and cable. Cutting should be done with marble cutting machine in proper manner and restore the same as before in such a manner that aesthetic of the platform is not disturbed. As per technical specification of tender document.

Supply & Installation of 9U rack with all accessories as per technical specification of tender document.

Splicing /Dropping/Termination of each Fiber /Pigtail in the LIU/FDMS/IO Box/Termination Joints through fusion Splicing of the termination of OFC Cables. As per technical specification of tender document.

Supply of 12 port rack mountable LIU along with all accessories with installation as per technical specification of tender document.

Supply of 24 port Rack mounted LIU along with all accessories with installation as per technical specification of tender document.

Supply and installation of 150mm width x50mm depth x 1.6mm thick size perforated 30 GI cable tray including horizontal and vertical reducers, tees, crossmembers and other accessories as required and duly suspended from the ceiling with GI suspenders etc with yellow colour painting or marking as required, as per technical specification of tender document.

Supply & fixing of 38 mm PVC Casing-Capping as per technical specification of tender document.

Supply and installation of 8 port manageable poe switch as per RDSO specification. As per technical specification of tender document.

Supply of 10/100/1000 Base-T Copper Ethernet Transceiver SFP Module with all accessories as per specification of Tender document.

Supply of OTDR suitable for 1310/1550 nm fiber with are solution of 60cm /better, dynamic range of 41/40 dB/better with all accessories, Disk Drive, AC Adopter/ Charger, 34 Rechargeable battery, Manual, hard & soft carrying case, etc. compliant with TEC specification No.GR/TX/OTD-01/04 APR-2010 with latest amendments in force at the time of tender opening with all accessories.{VFL Facility, internal memory, USB/ethernet facility, compatible with FC, SC, etc. as per technical specification of tender document.

Supply of Portable NMS complete with application software and all essential hardware for monitoring of existing OFC Network as per technical specification of tender document.

Supply of OFC Maintenance tool kit asper TEC Spec No-G/OMS/01/01 April 94 or latest. One set consisting of the following-(1)Philips/Flike/Motwani Digital Multimeter 4-1/2digit with LCD Display-(1No). (2) Rotary duct cutter for cutting ducts(with replaceble blade)-(2 No). (3) Utility Knife-(2 No). (4) Cable slitter-(1No). (5) Tubing cutter for cable armour-(1No).(6) Bare fibre adaptor- (1No).(7)Miller/Fujikura/proskit high precision stripper for fibre buffer-(3 No).(8) Pocket Cleaver Fujikura (CT -08)-(1No).(9) Mechanical splice joint set (1 set consisting of 6 nos).(10) Ceramic scissor CSI -(2 No). (11) LC,FC & SC adopter with 0 dB loss -(15 No).(12)Optical fibre terminal V groove - (2No). (13) Earth resistance measuring instruments with all accessories range from0.1 to 10Ohms. 36 (14)Megger (A) 500V-1No,(B) 100V -(1No). (15)Loose tube stripper -(2No). (16) Cord stripping plier - (1No). (17)Krone Tool -(1 No). (18)Isopropyl Alcohol- (1L).(19) Napkin- (500 No).(20) LC & SC attenuator with 5/10dBloss - [(20No (10 -10 each)]. (21)Laser Distance Meter 50m Range-(01 No). (22)Visual Fault Locator{pentype (range-30 km)}-(01No). (23) Fiber Protection Sleeves{40mm & 60 mm }-(100 No each) (24) LC to LCConnector-10 No. (24)Optical Power Meter suitable for testing of Fiber,850/1310/1550nm calibrated wavelength, single & multi mode operation, measurementrange+3dBm, 0.01 dB resolution, NIST traceable, GermaniumZeo/Set Ref, CE certified,270 Hz, 1 kHz,2 kHz Tone identification, (25)Digital Earth Resistance tester three-terminal type with LED display,1999 count, (26) UTP cable crimping tool, (27)Krone punching Tool with test jack" KRONEMAKE". as per technical specifications as approved.

Supply of self-supported aluminum flat step ladder (conforming to ISI) 10 ft. height. The ladder should be self-supported and it should be made up of rust-proof aluminum of Min16 SWG. No plastichinges/Step support should be used, as per technical specification of tender document.

Supply of Network Cable Tester Similar to Fluke Networks - MS2-100 - MICROSCANNER2 CABLE VERIFIER as per Technical Specification of tender document.

Supply of Tool kit for telecom maintenance with a small size canvas bag with the following items:- (1) Combination Plier 8".(2) Long Nose Plier (Round nose)6",(3) Wire Striper Plier 6", (4)Screw Driver set ( 5pieces), (5) Hexa with frame 12", (6) Double Open-end D spanner set( 6 to 39 32mm), (7)Adjustable Spannerset8", (8) Ball pinHammer (200 gm),(9)Side Cutting Plier 6",(10) Soldering iron(Solder on make or similar) (11) Torch cell LED ( 3cell)(Eveready)Geep or similar, (12)Auto Ranging Digital Multimeter (Mecco/Rishabh or similar) (13) Krone Tool(Krone make or similar)(14) Wago Slotted Screwdriver, Insertion & Extraction Tool-1 Set.(15) HDMI,RJ 11 & RJ45Cable Continuity Tester-01 Set. (16) Quad/PIJF cable Continuity Tester/buzzer- 02 no. All Tool items 1 to 9 of Taparia/Gedor/Jhalani make or similar, as per technical specification of tender document.

Supply of 25mm inner dia PVC Networking Flexible Pipe of reputed make, as per technical specification of Tender document.

Supply of 1G SFP+Module and compatible with supplied switches, as per technical specification of Tender document.

Supply, Installation, testing and Commissioning of on line UPS 5 KVA, with battery back up of minimum 4hours, with battery trolley, of reputed make, As per technical specifications.

Supply and Installation 2 KVA online UPS (Single Phase) with 1 Hour Backup along with suitable AH capacity battery and all the accessories required for installations. Detailed Specification in Technical Document

Supply of Horn type speaker 15 watts of Ahuja UHC-15 XT or similar, as per RDSO/SPN/TV/63/2006 with latest revision and as per technical specification.

Supply of 15 Watt Column speaker with all accessories, as per RDSO/SPN/TV/63/2006 with latest revision and as per technical specification.

supply of MS Bracket/ clamp/ wooden base fixers for fixing of loud speakers and confroming to as per technical specification.

installation of different type of speakers as per instructions of site incharge.

Supply, Installation and commissioning of GPS based Digital clock for Platform area to 48 operate in standalone mode with built in GPS Receiver & Antenna, mechanical hanging arrangement. Display format HH:MM: mode 123 or 24 hour format, Double sided with a cabinet size of 510 mm x 1200 mm x 300 mm as per Technical Specifications (with mono color/ white color LED)

Supply of twin core with shielded cable of 24/36 size PVC twisted Screened DATA cable of Deltron cable, Finolex Kenter or Network make as per Instruction of Engineer Incharge. as per technical specification.

Supply of Rigid PVC Conduits having Outer dia. 25mm & lnner dia. 21.40 mm, Thickness 1.6mm with lSl Mark (lS:9537 Part-3). As per technical specification of tender document.

Laylng and drawing ofData Communication Cable/CAT-6 & Power Cable, OFC in casing & capping/Rigid PVC conduit through wall i structure of platform shed/underground through GI/DWC/HDPE PiPE as per technical specification of tender document.

Supply & Installation of face to face enquiry consisting of an attendant unit, a 52 costumer unit and a power supply unit, which are easy to install and through dedicated cables as supplied with the system. (Inspection by Consignee) As per technical specification of tender document.

PA wall speaker make- Ahuja, model- WS664T or similar. Make- Ahuja Model WS664T as per technical specification of tender document.

Supply and Installation Testing and Commissioning of Isolated DC-AC Inverter 1+1HA input 48 V DC, Output:220V AC 1000VA or higher, with all required Protection Circuits.

Cement concrete work for miscellaneous items in the ration 1:3:6, Item includes 55 excavation, ramming, curing and plastering with cement & sand misture (aggregate not exceeding 3.8 cm) (aggregate cement and sand to be supplied by the contractor) as per technical specification of tender document.

D-Utility shifting of various telecom gears (PF work and other misc

Supply of 24 port Rack mounted LIU along with all accessories with installation as per 1 technical specification of tender document. Running

Laying of OFC/Power cable/CAT-6 cable/PA cable/Data cable and all the other types of telecom cable through HDPE pipe/casing capping/fall ceiling with laying/fixing of HDPE pipe/casing capping/uPVC pipe for connecting/interfacing various components and system integration.

Cutting of the platform surface (Tile/Slab) for a depth of 25cm and a width of 10cms 3 and refilling/Reconditioning/ Concerting/Repairing the platform after laying HDPE pipe and cable. Cutting should be done with marble cutting machine in proper manner and restore the same as before in such a manner that aesthetic of the platform is not disturbed.

Supply & installation of CAT6 Surface mount info-outlet as per technical specification of tender document.

Splicing /Dropping/Termination of each Fiber /Pigtail in the LIU/FDMS/IO Box/Termination Joints through fusion Splicing of the termination of OFC Cables. As per technical specification of tender document.

Supply & fixing of 38 mm PVC Casing-Capping as per technical specification of tender document.

"Supply, installation of 19""12 U Rack Wall/Pole Mount, with front Door Glass Door 7 Type, all Doors should be Removable Type with all accessories Like Electrical fitting, Fan Tray, Patch Panel, Cable Manager, Spike Buster/PDU.[Detailed Specification in Technical Document" as per technical specification of tender document.

Supply and installation of 19" 42U rack with accessories as per technical specification of tender document.

Supply and installation of 8 port manageable poe switch as per RDSO specification. As per technical specification of tender document.

Supply of 20 pair CT BOX made of cast aluminium with in built loking system DOUBLE 10 OUTLET WITH LEADING IN BRASS NOZZLES AND MAIN TAG BLOCK PLATE IS MOUNTED ON THE INNER ALUMINIUM CHAMBER WITH 40 BRASS TERMINALS 3.8 MM THICKNESS. Accepted make/brand - SELF. As per technical specification of tender document.

Supply and installation 1KVA/168VAH on line UPS(Single Phase) with 1Hour Backup and all the accessories required for installations, as per technical specification of Tender document.

Double Walled Corrugated (DWC) HDPE Pipe with associated collars etc. as per RDSO Specification No. RDSO/SPN/204/2011 or latest anti-rodent & anti-oxidant and non flame propagating type in 6 meters straight length and of size 120 mm outer die,& 103.5 mm inner dia. (The manufacturers, suppliers must produce valid IS license and should be certified under ISO 9000 12 and shall submit copy of certificate). One of the following coupling arrangements should also be supplied with each pipe as per the site requirement. 1)Suitable snap fit coupler with rubber 'O Ring 2)Spacers 3)Tees 4)Bend, 5)End-cap (The total quantity of above items is equal to no. of pipes supplied.) DWC pipe shall be marked at every 1 mtr length in such a way that manufacturer's name, vender name and year of manufacture can be easily identified. As per technical specification of tender document.

Supply of Half round RCC pipe with 150mm mm inner dia as per technical specification of tender document.(appx. 2no. X 1 mtr. Long As per (I.S. 458/2003)

Supply of Thermo shrinkable joint kit as per RDSO spec no. IRS TC 77/2010 Rev-2 or 14 latest suitable for 2T joint RTSF3 suitable to 6-quad cable of spec no. IRS TC-30/2005, Ver-1, Amd-4 or latest. With VF tapping transformer (RDSO spec.IRS:TC:76/2000 with amendment 1. As per technical specification of tender document.

Supply of 2x24 fiber optic fiber splice straight joint enclosure (SJC) complete with all accessories as per TEC Spec no. GR/OJC/02/02.MARCH 99 TEC specs for 24 fiber OFC cable with latest amendment. As per technical specification of tender document.

Supply & installation of RCC pre-fabricated OFC jointing pit, as per technical specification of tender document.

Supply of HDPE duct 40/33 mm as per TEC GR No. G/CDS 08/02 NOV-2004 with latest 17 amendments as available. For each Km of HDPE duct following items are to be supplied a) End Plugs- 2no b) Cable sealing plugs -2 no. (c ) Plastic couplers slip fit/push fit type - 2no d) End plugs to be provided along with drum -2 nos as per technical specification of tender document.

Excavation of trench 300mm wide at the bottom and 1.2 mtr deep, in all type of soils including clearing of trees, bushes, etc. and refilling of cable trench by excavated soil and ramming after laying of HDPE DUCT (laying of HDPE/DWC & 6 Quad. cables, PDF cables etc., will be paid under 18 different items of the schedule). Where desired dimensions of trenches could not be achieved proportionate payment will be made as decided by Engineer-in-charge of the Railway at site. The trenching outside the station limits I.e.) between the home signal of station 'A' to home signal of station 'B' may be done manually or by machine, as per the directions of site in charge. In no case the payment will be made for the trench of higher dimensions, than the dimensions as mentioned above as per technical specification of tender document.

Excavation of cable trench in rocky area, 300 mm wide at the top, 300 mm at the bottom and minimum 0.5 meter deep in rocky area (hard rocky soil mixed with boulders/hardmurrum) including cleaning of trees, bushes. The trenching will be done manually only 19 and limited to the stretch between the home signal to home signal of each station and other locations as per the directives of the site in charge. Where desired dimensions of trenches could not be not achieved proportionate payment will be made as decided by Engineer-in-charge of the Railway at site. In no case the payment will be made for trench of higher dimensions than the dimensions as mentioned above. As per technical specification of tender document. Running

Laying of half round RCC pipe after laying the cables in the trenches. (Cable laying is covered separately) as per technical specification of tender document. Running

Placing of DWC/RCC/GI pipes along with collars in trenches at places of track and road crossings, platform cuttings etc. As per technical specification of tender document.

Supply and installation of RCC cable route marker engraved and painted on both side along the route every 50m and route diversion as per technical specification of tender document.

Splicing of laid under above items OFC cable and making the splice joint in dust free environment with contractor's own equipments and labour. Straight joint enclosure (SJC) is covered under schedule 'A' remaining all required materials, tools , plants shall be arranged by the 23 contractor. splicing shall be started from one end and each splicing shall be monitored after splicing and after closing the enclosure for all the fibers from one central location by contractor's engineer with his own OTDR and optic Talk set with railway engineer , trace for the fibers shall be taken and signed jointly, if any fibred splice shows high loss/lossy event, the same shall be redone before completion of splicing work. The splice loss shall be as per the policy/technical circulars issued by the railways from time to time. As per technical specification of tender document.

Transportation and Laying of HDPE pipe as per approved cable route plan in the 24 excavated trench, taking due care while transporting and laying the same in the trenches or other protective works. Both the end of duct should be sealed with end plugs before laying and should remain sealed till blowing is done. As per technical specification of tender document. Running

Laying of S&T Cables of various cores/ pairs/ quads in trenches/ GI pipes/ RCC pipes/ DWC pipes/ Trunking. This also includes laying of cables in track crossings & road crossings. Item 25 includes provision of labels of coloured plastic adhesive tapes or any other identifiable material on each cable to give the cable number at each G.P.(Cables will be maggered before and after its laying by contractor under supervision of Railway Representative and he will submit the maggering report of each testing). Length of the cable laid includes the length of the cable coiled for termination purposes. As per technical specification of tender document.

Blowing of OFC through HDPE duct & protective work already provided. Where it is not feasible to blow OFC due to curves, road/track crossings, bridges or for any other reason, OFC shall be drawn /laid manually as per standard procedure. All the equipments and machinery required shall be arranged by the contractor at his own cost. In case OFC is to be laid adopting 'Direct in trench' method then this item shall be paid as per accepted rate of this schedule. OFC and HDPE pipe shall be supplied by the railway. As per technical specification of tender document.

Cement concrete work for miscellaneous items in the ration 1:3:6, Item includes 27 excavation, ramming, curing and plastering with cement & sand misture (aggregate not exceeding 3.8 cm) (aggregate cement and sand to be supplied by the contractor) as per technical specification of tender document.

Jointing of 4 / 6 quad /Signaling cable with Heat Shrinkable straight through Jointing Kit. All the material required for the work are to be arrange by contractor himself at his own cost 28 except Thermo shrinkable Joint Kit . After jointing the cable through test such as insulation test, continuity cable losses etc. to be carried out jointly with Railway Engineer. If any defect or any damage is observed during jointing, the contactor has to redo the joint free of cost. As per technical specification of tender document. Running

Horizontal direction drilling/boring without damage of surface road using Auger Machine. The bore shall be 150 mm dia & shall be done at the depth of minimum 1200 mm from the 29 ground level. The ground level shall be considered ignoring the bank height of the bank of the road. The length of the bore shall be minimum 4 Mtrs long. this include insertion of different dia DWC pipe/ GI pipes coupling etc. as per direction of Engineer In charge. Note:- Pipe will be supplied by railway. Contactor shall provide all material required for boring and adequate nos. of labours for proper laying of cables into the bore. Cable shall be laid cautiously so that it should not get damage due to rough handling & pressure on cable. As per technical specification of tender document.

E-Supply Items (SIGNAL Items)

Non Metallic (FRP) colour light signal housing multi unit type for railway signalling 1 suitable for RE area TWO Aspects complete (without lanse, lamp, holder, transformer) suitable for LED signal as per RDSO DRG. No. SA 23No. RDSO/SPN/194/2006 (Vol. 1.0) or latest and FRP material as per RDSO SPEC. No. RDSO/SPN/151/1997 or latest. (Supply of LED Unit is not covered in this item)

Colour Light Signal Complete. This includes: - (1). Post Tubular 140 mm Dia, as per IRS: S-6/81 or Latest & RDSO Drg. No. SA-24625 (Advance). (2). CI Base (As per IRS S-10 & RDSO 2 Drg. No. 2011/M with latest assembly). (3). Pinnacle. (4). Ladder Assembly, as per RDSO Drg. No. SA- 23156, with Base, Ladder Guards, Platform, Front Maintenance Platform, MS Supporting bracket to Support Ladder. (5). Signal Front Staging Complete Assembly for CLS Unit. (6). Signal back staging as per extent WR Practice. Note: Height of the Post shall be 5.5m / 4.5m/ 3.5m Long. Quantity of each will be decided by the engineer in charge.

Offset brackets for Main Signal, made of tubular steel, outer diameter 140 mm, thickness of pipe 4.5 mm. horizontal length of pipe 545 mm & vertical length of pipe 324 mm with fixing arrangement on Main Signal post as per Drawing No SW/554/G/R

Position Light Shunt Signal Unit Complete, with offset bracket, hood, Cover etc as per Drg. No. SA-23840 suitable for LED Signal Lighting Unit. (Supply of LED Unit is not covered in this item)

Calling ON Signal Unit with Brackets & Fixing accessories. Calling On Signal Unit shall conform to RDSO Drg no 24351(Adv) Alt1 suitable to LED Signal Lighting Unit.

Junction route indicator unit 1 way (Without Lenses & Holder) as per Drg. No. RDSO SA 23403 suitable for LED Signal Lighting Unit & as IRS: S 66/84 amndt-1 or latest (Supply of LED Unit is not covered in this item)

Medium Class G.I. Pipes to IS : 1239 (Pt.I)-2004 or latest ; 100mm dia. ( int. dia) 3.65 mm+/- 10% thick with coupling. G.I. pipes shall have ISI mark on it and contractor should submit manufacturer's test certificate of G.I. pipes.

ARA Terminal blocks with links made of PBT Spec No.IRS/75/2006(Rev - 2) with latest amendments and RDSO Drg.No.SA-23741A Alt.4.

Disconnect Terminal Block, Screw less type, as per RDSO Spec. No. 9 RDSO/SPN/189/2004. With latest amendments.Disconnect Terminal Block, Screw less type, 4-wire front entry (Two in-put & Two out-put) The colour will be decided by Engineer - in - Charge. (Preferably In Blue, Red & Grey Colors in the ratio of 1:2:3)

Supply of End plate for above item (10) 2.5mm/0.091 in thick as per site requirement.

Supply of End Stopper for above item (10) 10mm/0.0394 in width as per site requirement.

Supply of Carrier Rails for above item (4), 35mm x 7.5mm, 1mm/0.039 in thickness un-slotted type as per site requirement.

Phenolic laminated Sheet, grade P3 in standard size of 1220 X 1220 x 10 mm as per spec. No IS 2036 of 1995 or latest. Test report of manufacture to be supplied.

Cartridge fuse block made of PBT as per RDSO Drg No SA-23748 Alt 4 & Spec No IRS 14 S 75/2006 with latest amendment. Fuse block shall be suitable for round head type voltage fuses. This also includes supply of equivalent no of ND type Fuses of 2A capacity as per specification IRS S78/92.

Round head type non detoriating type low voltage cartridge fuse as per Spec No IRS/S/78/92 with latest amendments 6A/10A capacity.

Earth Electrode as per Drg. No. CSTE / 6091.

Relay, AC Immune, Plug-in-type, style "QNA1K" ACI DC Netural line, 24V DC 1000 17 Ohms 6F.6B contacts, front contacts metal to carbon and back contacts metal to cabon. complete with plugboard, retaining clip and connectors confirming to IRS:S34, IRS:S23, BRS931A. As per RDSO Specification No. STS/E/Relays/UEA(PI) Dt.30/05/97. Annexure II. The interlocking pin code CDEKY

Relay QNA1, AC immunized, 08F/08B, 12F-4B/8F-8B, 24VDC along with plug board, retaining clip and connectors conforming to BRS: 931A, IRS: S60, IRS: S34 & IRS: S24.

Track feed battery chargers, 110V AC input, 2 to 6 V DC Output; as per Specn.No.IRS.S 89/ 2013 with latest amendments. Charger shall be suitable for charging 80 AH battery.

Choke Coil for Single Rail Track Circuit on 25 KV 50 Hz AC Electrified Section as per Spec No IRS S 65/1983 with latest amendments.

Adjustable Track Feed Resistance disc type 30 ohms as per RDSO Drg. No. SA 20166/M (Adv) with latest amendments (with Phenolic moulded base).

Apparatus Case Single NE Rly Type as per Drg. No.W. Rly/SW/47/68 Alt A, fitted with 22 two nos of E Type lock (ward No will be specified by Engineer in Charge) as per RDSO Drg. No. SA 3376/3473 and Key to Drg. No. 3377 Note: This item includes the supply & fixing of 2 Nos E Type Lock fitted on both doors, along with two Keys.

F-Execution Items (SIGNAL Items)

Preparation of cable route plan, cable core plan, location particulars, Cable 1 termination rack particulars, cable meggering report, earth resistance particulars, Traction bonding diagram, 1/2 wire count sheet and any other drawing in AutoCAD in A3/A4 size. The contractor shall initially supply 3 sets of circuits complete for approval of Railways. Railways will return one set to the contractor duly approved with alterations/corrections, if any. The contractor shall incorporate Railway's alterations/corrections in the tracings without any deviation and submit all tracings complete in all respects to the Railways along with CD & 4 sets of final approved drawings. This includes submission of final cable route plan as per laid cable duly measured at every 30m clearly indicating distance of laid cable from fixed point of reference & indicating all track crossings and tail cables. This also includes designing of cable core plan based upon I.P in consultation with engineer- in-charge For small/medium yards

Excavation and Casting of foundation for main signal post as per CSTE/3122 (WR) 2 with contractor's own materials including cement and anchor bolts of standard size. The required scaffolding Ferma etc for Casting of foundation will have to be brought by the contractor at his own cost.

Erection of CLS Post with base and signal unit on top or on OFF set Bracket, fixing of front and back staging, ladder and guards, signal name plates / boards if any with contractor's own brackets and fixing materials. This also includes erection of auxiliary signals like calling on, shunt 3 signal if any. The work shall be done as per instructions of Rly engineer at site. It also includes provision & fixing of maintenance platform as per design given by Engineer -In-Charge at site. The Item includes cutting of Signal post if required by Site In charge. (i) 2/3/4 aspect signal unit mounted o n offset bracket with junction type route indicator 1/2/3 on multilamp lamp route indicators mounted on signal post.

Erection of CLS Post with base and signal unit on top or on OFF set Bracket, fixing of front and back staging, ladder and guards, signal name plates / boards if any with contractor's own 4 brackets and fixing materials. This also includes erection of auxiliary signals like calling on, shunt signal if any. The work shall be done as per instructions of Rly engineer at site. It also includes provision & fixing of maintenance platform as per design given by Engineer -In-Charge at site. The Item includes cutting of Signal post if required by Site In charge. (ii)2/3/4 aspect signal unit mounted mounted directly on signal post

Erection of Position Light shunt signal on Offset bracket on main signal.

Fixing of Calling-on Signal/A-Sign/AG-Sign unit on signal post. The item includes fixing 6 of Co- On signal /'A' sign/ 'AG' sign unit on signal post with bracket, hood etc. Item includes supply bracket & fixing materials etc. by the contactor. The item also includes termination of cables & wiring inside Co- On signal /'A' sign/ 'AG' sign unit as per standard practice.

Painting of two coats of synthetic enamel paint over one coat of primer on the following after scraping & cleaning surface wherever necessary with contractor's own supply of paints. Wherever required contractor shall apply coating of epoxy paint also as per instructions of 7 site-in-charge. Epoxy paint will be supplied by Railways. NOTE:- The paint and primer should be from Asian Paints/ Nerolac / Dulux / Berger. The primer / enamel paints (Aluminum synthetic, black enamel, brilliant white and yellow) will be as per (IS 5660 of 1970) / (IS 2932 of 1974):- Main Signal Post with Signal Units , Surface base and complete fittings as per Western Railways standard practice.

Fabrication and fixing of Signal Number Plate( CSTE Drg No CSTE/6186) , 'A' Marker 8 (Drg No. CSTE/6180), 'AG' Marker (Drg No. CSTE/6181), 'P' Marker (Drg No. CSTE/6182), Arrow Marker (Drg No. CSTE/6183), 'G' Marker (Drg No. CSTE/6184), 'C' Marker (Drg No. CSTE/6185). marker disk on signals as per standard practice All material required for this work shall be supplied by Contractor. Running

Laying of S&T Cables of various cores/ pairs/ quads in trenches/ GI pipes/ RCC pipes/ DWC pipes/ Trunking. This also includes laying of cables in track crossings & road crossings. Item 9 includes provision of labels of coloured plastic adhesive tapes or any other identifiable material on each cable to give the cable number at each G.P.(Cables will be maggered before and after its laying by contractor under supervision of Railway Representative and he will submit the maggering report of each testing). Length of the cable laid includes the length of the cable coiled for termination purposes.

Fixing of ARA Terminals /Screw less connectors and fuse blocks on phenolic laminated sheets and fixing by stainless steel/brass nuts & bolts. This includes provision of two additional holes on the board on either side for cable conductor entry. Per

Termination of cable cores on ARA terminal/fuse blocks, 8 way terminals block/ Screw less connectors in the apparatus Cases/ cable termination rack. This includes all associated works of pulling out the cable from underground. The work shall be done as per location plans and instructions of Railway Engineer at site. This item includes dressing of Cable, making wiring tree etc.

Excavation of cable trench as per cable route plan,1Mtr. deep and of 0.3 Mtr. to 0.6 Mtrs wide advised by Engineer-in-charge alongside the track in normal (all type) soil/strata, conforming to distances as per cable route plan and refilling. This work includes clearing of route 12 from bushes etc, covering of cable laid in trench by loose soil for a layer of 50mm thickness approximately before covering by bricks. The work shall be done as per the extant practice on Western Railway and instructions of Railway Engineer at site. In case 1m depth of trench is not achievable due to site conditions, specific approval of JA grade officer will be required for each site where trench depth of 1m is not possible. Without the approval of JA Grade officer, no payment for trenching will be made for trench depth less than 1m.

Digging of cable trench 0.3 Mtrs. Deep and 0.3 Mtrs. Wide on Asphalted Platform / Road / Hard rocky area. Refilling with earth leveling of trenches & restoring the original surface of trenches.

Providing chase in hard rocky soil for laying of S&T cables where optimum depth (0.5m) in not possible and which is verified and agreed by engineer incharge. Running

Horizontal direction drilling/boring without damage of surface road using Auger Machine. The bore shall be 150 mm dia & shall be done at the depth of minimum 1200 mm from the 15 ground level. The ground level shall be considered ignoring the bank height of the bank of the road. The length of the bore shall be minimum 4 Mtrs long. this include insertion of different dia DWC pipe/ GI pipes coupling etc. as per direction of Engineer In charge. Note:- Pipe will be supplied by railway. Contactor shall provide all material required for boring and adequate nos. of labours for proper laying of cables into the bore. Cable shall be laid cautiously so that it should not get damage due to rough handling & pressure on cable.

Cement concrete work for miscellaneous items in the ratio 1 : 3 : 6 . Item includes excavation, ramming, curing and plastering with cement & sand mixture (aggregate not exceeding 3.8 cm.) (Aggregate cement & sand to be supplied by the contractor).

Supply and placing of Half Round RCC pipes & collars of 150 mm internal dia, 2 meter long (or two pieces of 1 meter long) along with collars as per IS No. 458/2003 of NP type

Supply and installation of RCC Cable route marker as per Drg.No.4014/00/CC4 or latest/stone marker

Fixing & wiring of QNA1 / QNA1K relays for GPR Circuit in apparatus case as per Standard practice. Fixing and wiring material shall be supplied by the contactor.

Excavation and Casting of Apparatus Case foundation with contractor's own materials 20 including cement and anchor bolts of standard size. The required scaffolding Ferma etc for Casting of foundation will have to be brought by the contractor at his own cost. Single Case as per Drg No SK 748 or CSTE/5074.

Fabrication and fixing of phenolic laminated sheet of size 10mm thick in location box 21 by providing all fixtures as per Railway Drawing including fixing of PVC coated string rods at the back side for cable support with contractor's own materials. The work shall be done as per drg and arrangement similar to SK 783-1/2. with latest alterations & as per instructions of Rly engineer at site. Single Case

Painting of two coats of synthetic enamel paint over one coat of primer on the following after scraping & cleaning surface wherever necessary with contractor's own supply of paints. Wherever required contractor shall apply coating of epoxy paint also as per instructions of site-in-charge. Epoxy paint will be supplied by Railways. NOTE:- The paint and primer should be from Asian Paints/ Nerolac / Dulux / Berger. The primer / enamel paints (Aluminum synthetic, black enamel, brilliant white and yellow) will be as per (IS 5660 of 1970) / (IS 2932 of 1974). Apparatus Case Full Size. (Outside & inside)

Lettering / Numbering Termination particulars, equipments names etc., legibly and neatly inside location boxes. This includes supply of paints of Asian Paints/ Nerolac / Dulux / Berger make. - App case Full size

Installation of earth electrode as per std. practice and connecting it to equipments to be earthed. This item includes digging of pit in earth 3 m deep & fixing earth electrode pipe, casting 24 of cement concrete enclosure & cover as per Drg No. S&T/Tender/27.Soil treatment to be done as per std. practice. This item includes provision of MS flat/earth lead wires as per instruction and soldering of lead wires. The other end of the wire is to be connected to block equipment, power equipment, cable sheath, signals etc. as per site requirements. 7strand GI wire shall be used as earth lead wire. (Supply of earth electrode is covered in Sch. 'A').

Fixing of GI pipes for crossing the culverts, bridges etc. and concreting of ends with brick masonry at both ends as per the instruction of Rly engineer at site. Per Track

Fixing and wiring of DC track circuit equipments i.e. track feed charger, resistance, track relay, battery, etc., in the Apparatus Case and battery box as per standard practice. 26 Termination of tail cable on M 6 / Screw less terminals WAGO or FINOLEX or similar approved make teminals/ fuse blocks / HRC fuse. Item includes testing /commissioning of track circuit. Complete wiring material will be supplied by contractor (Supply of Track feed battery charger, track feed battery, resistances & 'B' type choke & Track relays will be supplied by Railways / covered in Schedule separately). (Unit of this item is "Per TC")

Dismantling Existing Electic lifting barrier / mechanical lifting barriers & other material at LC gates complete and transporting them to Consignee's Stores Depot / nearest DS8 27 yard. This includes complete mechanical items including levers, rodding iron, point fittings, lock bar, compensators, Electrical fittings in the cabin and other miscellaneous items (whatever applicable to the particular installation). Removal of Trestle from the soft soiland bottom, top roller and strand of rod etc. The field items such as Junction boxes, AC boxes etc. shall also be dismantled as per instruction of Engineer - in - charge.

Dismantling of Concrete foundations/Dimolishing RCC/CC/Stone Work/Cutting Tarcarpenting/CC Flooring/Pricast Concrete slabs etc./Brick work includingleading the debris inside Railway limit or outside Railway limit as directed by site in charge.

Dismantling & releasing of all type of Apparatus case including foundation complete and other accessories and transporting them to consignee's depot or DS-8 depot as per the instruction of Engineer In-charge by contactors own vehicle & labour.