REPAIR AND MAINTENANCE OF WATER SUPPLY EQUIPMENTS AND ALLIED WORKS UNDER GE DEHU ROAD

Amount

Disconnecting /dismantling /taking out the defective burnt out VT pump set (Moter/Pump) from jack well and transporting to shop including loading/unloading etc complete and reffixing again after necessary repair work of capacity 30/60 HP Vertical motor. The repair includes followings a) Dismantling/taking out strip opening /inspection complete of the bowl assembly, column pipe assembly, discharge head assembly etc and cleaing/ servicing overhauling all the servicable spare parts and M &L for painting to exposed surfaces of the column pipe assembly, bowl assembly and discharge head assembly etc with two coats of approved quality anticorrosive water resistant type black paint all as directed including labours for replacement of worn out / unservicable parts as required and directed. b) Reassembling the complete pump set and re-erection and re-installation at its original position as directed c) Testing and commissioning complete all as directed by Engr-in-Charge. Note: 1) The rate quoted by the tenderer includes all cost of necessary nut bots washers and alike if not included in Sch A 2) All new parts required will be measured and paid separately as supply only items. 3) The rate quoted by the tenderer also includes cost for taking out pump from the well 20m depth from GL and again lowering the same in its original level and alignment complete. 4)The size of wiring to be incorporated in the work shall be as per existing one hence contractor is requested to visit the site and to get acquanted with site conditions complete. 5)T&P , Transport etc incl in quated rate . 6) Location :Keniya Pump House and A-I Pump House

Supply for repair suction case bearing for 30 HP VT Pump set of Capacity 30 HP.Make:Joyti

Supply for repair suction case bearing for 60 HP VT Pump set of Capacity 30 HP.Make:Joyti

Supply for repair Impeller seal ring of Capacity 30 HP.Make:Joyti

Supply for repair Impeller seal ring of Capacity 60 HP.Make:Joyti

Supply for repair Bearing holder assembly of Capacity 60 HP.Make:Joyti

Supply for repair Line shaft Bearing (Throdan type) of Capacity 30 HP.Make:Joyti

Supply for repair Stuffing box bush of Capacity 30 HP.Make:Joyti

Supply for repair Stuffing box bush of Capacity 60 HP.Make:Joyti

Supply for repair Latern Ring of Capacity 30/60 HP.Make:Joyti

Supply for repair Water deflector of Capacity 30/60 HP.Make:Joyti

Supply for repair Head shaft coupling of Capacity 30 HP.Make:Joyti

Supply for repair Head shaft coupling of Capacity 60 HP.Make:Joyti

Supply for repair Impeller made out of MS with impeller key 30/60 HP complete all as directed

Supply for repair Strainer Assembly of Capacity 30/60 HP.Make:Joyti

Supply for repair Impeller shaft of Capacity 30 HP.Make:Joyti

Supply for repair Impeller shaft of Capacity 60 HP.Make:Joyti

Supply for repair Impeller collect assemly of Capacity 30/60 HP.Make:Joyti

Supply for repair NDE Bearing No 6307/C3 suitable for 30/60 HP Make SKF OR equivalent

Supply for repair electric connection box of ebonite materials with Insulators, lugs , protection cover suitable for 30/60 HP.

Disconnections suction and discharge line connection,Diconnection coupling motor of centrifugal pump of discharge capacity 120 LPS with head 100 mtr, motor capacity150 HP . Lifting and removing pump form its existing foundation. Dismantling the pump carefully checking, segregating serviceable,repairable and unserviceable parts, cleaning the serviceable parts thoroughly by approved method (Pats like shaft, key,Impellior,bearing upper casing etc) including replacement of unserviceable parts as required (The same will be measured and paid separately in respectable items mention bellow). Reassembling the pump including painting with two coats of synthetic enamel paint after necessary surface preparation , marking of number (SM, MES or srl No) installing to its existing foundation, commissioning, connecting up and testing complete as directed . Pump Make=Kirloskar.Model No DSM 150/46. Location: Keniya Pump House. Note:(i) Spare parts for repair/replace will measured in respective items as per site required

Repair the Pump shaft with metaling, grinding,polishing,balancing with true shape Suitable for pump set Model no DSM 150/46 ,Kirloskar

Supply Coupling Key Suitable for pump set Model no DSM 150/46 ,Kirloskar

Supply Key for Impeller SSuitable for pump set Model no DSM 150/46 ,Kirloskar

Supply Key for Sleeve Nut Suitable for pump set Model no DSM 150/46 ,Kirloskar

Supply Bolt for upper and lower half casing Suitable for pump set Model no DSM 150/46 ,Kirloskar

Supply Taper pin with washers and nuts for lower and upper half casingCoupling Key suitable for DSM 150/46 ,Kirloskar

Supply Draing plug for casing suitablefor 15 HP pump . Suitable for DSM 150/46 ,Kirloskar

Supply Paper packing between lower and upper casing Key Suitable for pump set Model no DSM 150/46

Supply O ring for shast sleev Suitable for pump set suitable for Model no DSM 150/46 ,Kirloskar

Supply Wear Ring suitable for Pump set Suitable for pump set Model no DSM 150/46 ,Kirloskar

Supply Shoulder Ring in CI Suitable for pump set Model no DSM 150/46 150 HP

Supply Interstage Ring Suitable for pump set Model no DSM 150/46 ,Kirloskar

Supply Lantern Ring Suitable for pump set Model no DSM 150/46 ,Kirloskar

Supply DE ball bearing Suitable for pump set Model no DSM 150/46 ,Kirloskar

Supply DE Bearing Cover Suitable for pump set Model no DSM 150/46 ,Kirloskar

Supply Cartridge for bearing, NDE Suitable for pump set Model no DSM 150/46 ,Kirloskar

Supply Bearing cover, NDE Suitable for pump set Model no DSM 150/46 ,Kirloskar

Supply Bearing Cap Suitable for pump set Model no DSM 150/46 ,Kirloskar

Supply Bearing nut,Suitable for pump set Model no DSM 150/46 ,Kirloskar

Supply Shaft sleeve, DE/NDE,Suitable for pump set Model no DSM 150/46 ,Kirloskar

Supply Water Deflector DE/NDE,Suitable for pump set Model no DSM 150/46 ,Kirloskar

Supply Air vent,Suitable for pump set Model no DSM 150/46 ,Kirloskar

Supply Hex screw for bearing cover,Suitable for pump set Model no DSM 150/46 ,Kirloskar

Supply Cylindrical pin,Suitable for pump set Model no DSM 150/46 ,Kirloskar

Supply Round Lock nut ,Suitable for pump set Model no DSM 150/46 ,Kirloskar

Supply Gland Packing,Suitable for pump set Model no DSM 150/46 ,Kirloskar

Supply Vent Valve,Suitable for pump set Model no DSM 150/46 ,Kirloskar

Supply Flexible ST Hose Pipe,Suitable for pump set Model no DSM 150/46 ,Kirloskar

Supply Gland stuffing box suitable for nut and bolts Suitable for pump set Model no DSM 150/46 ,Kirloskar

Disconnections suction and discharge line connection,Diconnection coupling motor of centrifugal pump of discharge capacity 100 LPS with head 100 mtr, motor capacity120 HP . Lifting and removing pump form its existing foundation. Dismantling the pump carefully checking, segregating serviceable,repairable and unserviceable parts, cleaning the serviceable parts thoroughly by approved method (Pats like shaft, key,Impellior,bearing upper casing etc) including replacement of unserviceable parts as required (The same will be measured and paid separately in respectable items mention bellow). Reassembling the pump including painting with two coats of synthetic enamel paint after necessary surface preparation , marking of number (SM, MES or srl No) installing to its existing foundation, commissioning, connecting up and testing complete as directed . Pump Make=Kirloskar.Model No DSM 150/46. Note:(i) Spare parts for repair/replace will measured in respective items as per site required centrifugal pump of discharge capacity 100 LPS with head 100 mtr, motor capacity120 HP Pump Make=Kirloskar.Model No RKB-100/23E35. Location: Keniya Pump House

Repair the Pump shaft with metaling, grinding,polishing,balancing with true shape Suitable for pump set Model no- RKB-100/23E35Make-Kirloskar.

Supply Coupling Key Suitable for pump set Model no- RKB-100/23E35,Make-Kirloskar.

Supply Key for Impeller SSuitable for pump set Model no- RKB-100/23E35,Make-Kirloskar.

Supply Key for Sleeve Nut Suitable for pump set Model no- RKB-100/23E35,Make-Kirloskar.

Supply Bolt for upper and lower half casing sSuitable for pump set.Model no- RKB-100/23E35,Make-Kirloskar.

Supply Taper pin with washers and nuts for lower and upper half casingCoupling Key suitablefor Model no- RKB-100/23E35,Make-Kirloskar.

Supply Draing plug for casing suitablefor 15 HP pump .Model no- RKB-100/23E35,Make-Kirloskar.

Supply Paper packing between lower and upper casing Key Suitable for pump setModel no- RKB-100/23E35,Make-Kirloskar.

Supply O ring for shast sleev Suitable for pump set.Model no- RKB-100/23E35,Make-Kirloskar.

Supply Wear Ring suitable for Pump set Suitable for pump set .Model no- RKB-100/23E35,Make-Kirloskar.

Supply Shoulder Ring in CI Suitable for pump set .Model no- RKB-100/23E35,Make-Kirloskar.

Supply Interstage Ring Suitable for pump set. Model no- RKB-100/23E35,Make-Kirloskar.

Supply Lantern Ring Suitable for pump set .Model no- RKB-100/23E35,Make-Kirloskar.

Supply DE Bearing Cover Suitable for pump set. Model no- RKB-100/23E35,Make-Kirloskar.

Supply NDE Bearing Suitable for pump set .Model no- RKB-100/23E35,Make-Kirloskar.

Supply Cartridge for bearing, NDE Suitable for pump set .Model no- RKB-100/23E35,Make-Kirloskar.

Supply Bearing cover, NDE Suitable for pump set. Model no- RKB-100/23E35,Make-Kirloskar.

Supply Bearing Cap Suitable for pump set. Model no- RKB-100/23E35,Make-Kirloskar.

Supply Bearing nut,Suitable for pump set. Model no- RKB-100/23E35,Make-Kirloskar.

Supply Shaft sleeve, DE/NDE,Suitable for pump set .Model no- RKB-100/23E35,Make-Kirloskar.

Supply Water Deflector DE/NDE,Suitable for pump set Model no DSM 150/46 ,Kirloskar

Supply Air vent,Suitable for pump set .Model no- RKB-100/23E35,Make-Kirloskar.

Supply Hex screw for bearing cover,Suitable for pump set.Model no- RKB-100/23E35,Make-Kirloskar.

Supply Cylindrical pin,Suitable for pump set .Model no- RKB-100/23E35,Make-Kirloskar.

Supply Round Lock nut ,Suitable for pump set .Model no- RKB-100/23E35,Make-Kirloskar.

Supply Gland Packing,Suitable for pump set. Model no- RKB-100/23E35,Make-Kirloskar.

Supply Vent Valve,Suitable for pump set Model no- RKB-100/23E35,Make-Kirloskar.

Supply Flexible ST Hose Pipe,Suitable for pump set Model no- RKB-100/23E35,Make-Kirloskar.

Supply Gland stuffing box suitable for nut and bolts Suitable for pump set Model no- RKB-100/23E35,Make-Kirloskar.

Disconnections suction and discharge line connection,Diconnection coupling motor of centrifugal pump of discharge capacity 130 LPS with head 105 mtr, motor capacity75 HP . Lifting and removing pump form its existing foundation. Dismantling the pump carefully checking, segregating serviceable,repairable and unserviceable parts, cleaning the serviceable parts thoroughly by approved method (Pats like shaft, key,Impellior,bearing upper casing etc) including replacement of unserviceable parts as required (The same will be measured and paid separately in respectable items mention bellow). Reassembling the pump including painting with two coats of synthetic enamel paint after necessary surface preparation , marking of number (SM, MES or srl No) installing to its existing foundation, commissioning, connecting up and testing complete as directed . Pump Make=Kirloskar.Model No DSM 150/46. Note:(i) Spare parts for repair/replace will measured in respective items as per site required centrifugal pump of discharge capacity 130 LPS with head 105 mtr, motor capacity75 HP Pump Make=GRUNDFOS .Location :- Keniya Pump House.

Bulk Impeller 99262569,uitable for 75 HP centrifugal Pump,Make : Grand Force.

Shaft 99196563,uitable for 75 HP centrifugal Pump,Make : Grand Force.

Kit wear part,uitable for 75 HP centrifugal Pump,Make : Grand Force.

Kit Bearing,uitable for 75 HP centrifugal Pump,Make : Grand Force.

Disconnections suction and discharge line connection,Diconnection coupling motor of centrifugal pump of discharge capacity 34 LPS with head 60/75 mtr, motor capacity 60 HP . Lifting and removing pump form its existing foundation. Dismantling the pump carefully checking, segregating serviceable,repairable and unserviceable parts, cleaning the serviceable parts thoroughly by approved method (Pats like shaft, key,Impellior,bearing upper casing etc) including replacement of unserviceable parts as required (The same will be measured and paid separately in respectable items mention bellow). Reassembling the pump including painting with two coats of synthetic enamel paint after necessary surface preparation , marking of number (SM, MES or srl No) installing to its existing foundation, commissioning, connecting up and testing complete as directed . Pump Make=Kirloskar.Model No DSM 80/36. Note:(i) Spare parts for repair/replace will measured in respective items as per site required centrifugal pump of discharge capacity 130 LPS with head 75 mtr, motor capacity 60 HP Pump Make=Kirloskar .Location :- MIDC Pump House.

Supply Shoulder Ring in CI suitable for PUMP set,,suitable for Model No DSM/80/36,Make: Kirloskar.

Supply Interstage Ring suitable for Pump set,,suitable for Model No DSM/80/36,Make: Kirloskar.

Supply Lantern Ring suitable for Pump set,,suitable for Model No DSM/80/36,Make: Kirloskar.

Supply Gland suitable for Pump set,,suitable for Model No DSM/80/36,Make: Kirloskar.

Supply DE Bearing s,suitable for Model No DSM/80/36,Make: Kirloskar.

Supply NDE Bearing ,suitable for Model No DSM/80/36,Make: Kirloskar.

Supply Deep Groove Ball bearing suitable for 60 HP,,suitable for Model No DSM/80/36,Make: Kirloskar.

Supply ANG Contact Ball bearing,,suitable for Model No DSM/80/36,Make: Kirloskar.

Supply Bearing Cover,,suitable for Model No DSM/80/36,Make: Kirloskar.

Supply Cover NDE,,suitable for Model No DSM/80/36,Make: Kirloskar.

Supply Shaft Sleeve,suitable for Model No DSM/80/36,Make: Kirloskar.

Supply Key for Impeller,,suitable for Model No DSM/80/36,Make: Kirloskar.

Supply Key for Coupling,,suitable for Model No DSM/80/36,Make: Kirloskar.

Supply Key for Sleeve Nut,,suitable for Model No DSM/80/36,Make: Kirloskar.

Supply Shaft Sleeve Nut ,,suitable for Model No DSM/80/36,Make: Kirloskar.

Supply Round Lock nut ,,suitable for Model No DSM/80/36,Make: Kirloskar.

Supply Gland Packing,,suitable for Model No DSM/80/36,Make: Kirloskar.

Supply Vent Valve,,suitable for Model No DSM/80/36,Make: Kirloskar.

Supply Set of O Ring ,,suitable for Model No DSM/80/36,Make: Kirloskar.

Supply Flexible ST Hose Pipe,,suitable for Model No DSM/80/36,Make: Kirloskar.

Supply Ms stud and including replacement of CI gland ,suitable for Model No DSM/80/36,Make: Kirloskar.

Supply Cooling PVC flexible of ,suitable for Model No DSM/80/36,Make: Kirloskar.

Disconnections suction and discharge line connection,Diconnection coupling motor of centrifugal pump of discharge capacity 36000 GPS with head 122 mtr, motor capacity 100 HP . Lifting and removing pump form its existing foundation. Dismantling the pump carefully checking, segregating serviceable,repairable and unserviceable parts, cleaning the serviceable parts thoroughly by approved method (Pats like shaft, key,Impellior,bearing upper casing etc) including replacement of unserviceable parts as required (The same will be measured and paid separately in respectable items mention bellow). Reassembling the pump including painting with two coats of synthetic enamel paint after necessary surface preparation , marking of number (SM, MES or srl No) installing to its existing foundation, commissioning, connecting up and testing complete as directed . Pump Make=Kirloskar.Model No Model No K1225 Note:(i) Spare parts for repair/replace will measured in respective items as per site required centrifugal pump of discharge capacity 36000 GPS with head 122 mtr, motor capacity 100 HP Pump Make=Kirloskar. Location :- A-2 Pump House.

Supply Lantern Ring suitable for Pump set,suitable for Model No K1225 Make : Kirloskar

Supply Gland suitable for Pump set,suitable for Model No K1225 Make : Kirloskar

Supply DE Bearing suitable for Model No K1225 Make : Kirloskar

Supply NDE Bearing suitable for Model No K1225 Make : Kirloskar

Supply Deep Groove Ball bearing suitable for Model No K1225 Make : Kirloskar

Supply ANG Contact Ball bearing,suitable for Model No K1225 Make : Kirloskar

Supply Bearing Cover,suitable for Model No K1225 Make : Kirloskar

Supply Bearing Cover NDE,suitable for Model No K1225 Make : Kirloskar

Supply Shaft Sleeve suitable for Model No K1225 Make : Kirloskar

Supply Key for Impeller,suitable for Model No K1225 Make : Kirloskar

Supply Key for Sleeve Nut,suitable for Model No K1225 Make : Kirloskar

Supply Shaft Sleeve Nut ,suitable for Model No K1225 Make : Kirloskar

Supply Round Lock nut,suitable for Model No K1225 Make : Kirloskar

Supply Gland Packing,suitable for Model No K1225 Make : Kirloskar

Supply Set of O Ring ,suitable for Model No K1225 Make : Kirloskar

Supply Gland stuffing box suitable for nut and bolts suitable for Model No K1225 Make : Kirloskar

Disconnections suction and discharge line connection,Diconnection coupling motor of centrifugal pump of discharge capacity 10000 GPS with head 26 Mtr, motor capacity 15/20 HP . Lifting and removing pump form its existing foundation. Dismantling the pump carefully checking, segregating serviceable,repairable and unserviceable parts, cleaning the serviceable parts thoroughly by approved method (Pats like shaft, key,Impellior,bearing upper casing etc) including replacement of unserviceable parts as required (The same will be measured and paid separately in respectable items mention bellow). Reassembling the pump including painting with two coats of synthetic enamel paint after necessary surface preparation , marking of number (SM, MES or srl No) installing to its existing foundation, commissioning, connecting up and testing complete as directed . Make : Kirloskar OR Equivalent Note:(i) Spare parts for repair/replace will measured in respective items as per site required centrifugal pump of discharge capacity 10000 GPS with head 26 Mtr, motor capacity 15/20 HP Pump Make=Kirloskaror equivalent.Location :- C-1 and C-2 Pump House,COD Depot,FAD Depot.

DE/NDE Bearing No 6306 suitable for Make : Kirloskar OR Equivalent

Shaft bush for 15/20 HP Pump including removal from the pumps,Make : Kirloskar OR Equivalent

Shaft coupling flexible type KC 276 FOR 15/20 HP Cappacity in repair and removal from pumps Make : Kirloskar OR Equivalent

Star Nuts for 15/20 HP Centrifugal pump Make : Kirloskar OR Equivalent

Impeller wear ring Model no KDS 15/20 HPMake : Kirloskar OR Equivalent

Bearing housing.Model no KDS 15/20 HP Make : Kirloskar OR Equivalent

Disconnections suction and discharge line connection,Diconnection coupling motor of centrifugal pump of discharge capacity 25LPS with head 25 Mtr, motor capacity 10 HP . Lifting and removing pump form its existing foundation. Dismantling the pump carefully checking, segregating serviceable,repairable and unserviceable parts, cleaning the serviceable parts thoroughly by approved method (Pats like shaft, key,Impellior,bearing upper casing etc) including replacement of unserviceable parts as required (The same will be measured and paid separately in respectable items mention bellow). Reassembling the pump including painting with two coats of synthetic enamel paint after necessary surface preparation , marking of number (SM, MES or srl No) installing to its existing foundation, commissioning, connecting up and testing complete as directed . Make : Kirloskar OR Equivalent Note:(i) Spare parts for repair/replace will measured in respective items as per site required centrifugal pump of discharge capacity 25LPS with head 25 Mtr, motor capacity 10 HP Pump Make=Kirloskaror equivalent.Location :- COD Depot,FAD Depot.STP

Pump shaft Suitable for pump set 10 HP.Make : Kirloskar

DE/NDE Bearing of capacity 10 HP.Make : Kirloskar

Shaft bush for 10 HP Pump including removal from the pumps.Make : Kirloskar

Shaft coupling flexible type 10 HP Cappacity in repair and removal from pumps.Make : Kirloskar

Star Nuts for 10 HP Centrifugal pump Make : Kirloskar

Mechanical Shaft seal for 10 HP Centrifugal pump .Make : Kirloskar

Disconnection the electric and pum connectio and transportation to work shop for repair and back,taking out burnt winding coils from stator body cleaning of slots with soft wire brush and rewinding by using super enameled copper wire of existing size & gauge, heat and varnishing complete and M&L winding with super enamal copper wire of existing gauge including greasing, varnishing and alike testing and painting with two cote of synthetic eanamel paint,complete suitable for Squirrel cage electric motor of capacity 150 HP 3 phase 415 Volt AC supply. (make : kirlosker )

All as item no 9 here in before but Squirrel cage electric motor of capacity120 HP 3 phase 415 Volt AC supply. ( make : kirlosker )

All as item no 9 here in before but Squirrel cage electric motor of capacity 75/60 HP 3 phase 415 Volt AC supply. (make : kirlosker )

All as item no 9 here in before but Squirrel cage electric motor of capacity 30 HP 3 phase 415 Volt AC supply. (make : kirlosker )

All as item no 9 here in before but Squirrel cage electric motor of capacity 15/20 HP 3 phase 415 Volt AC supply ( make : kirlosker )

All as item no 9 here in before but Squirrel cage electric motor of capacity 10 HP 3 phase 415 Volt AC supply ( make : kirlosker )

All as item no 9 here in before but Squirrel cage electric motor of capacity 5 HP/3 HP 3 phase 415 Volt AC supply ( make : kirlosker )

Disconnection the electric and lifting the submersible pump from river bed,well and transportation to work shop for repair and back,taking out burnt winding coils from stator body cleaning of slots with soft wire brush and rewinding by using super enameled copper wire of existing size & gauge, heat and varnishing complete and M&L winding with super enamal copper wire of existing gauge including greasing, varnishing and alike testing complete suitable for Submersible motor with pump of capacity 15 HP 3 phase 415 Volt AC supply.

All as item no-16 here in before but capacity of submersible pump 10 HP

Taking down the unserviceable Fan Blade upto 20 HP Motor and supply fixing the same.

Taking down the unserviceable Fan Blade upto 30 HP Motor and supply fixing the same.

Taking down the unserviceable Fan Blade upto 60 HP Motor and supply fixing the same.

Taking down the unserviceable Fan Blade upto 100-150 HP Motor and supply fixing the same.

S&F in repair electric connection box of ebonite materials with Insulators, lugs , protection cover suitable for 30 HP.

Taking down the unserviceable Starter from the existing panel and Supply and Fixing FASD For 15 HP Squirrel cage Induction motor Make L&T C&S, Havells or equivalen

Taking down the unserviceable Starter from the existing panel and Supply and Fixing Citation Fully Automatic Star delta starter with citation M Contactor and pneumatic timerssuitable for 75 HP,55KW , three phase,415 Volt,50 Hz,Overhead relay range 56.4 -90 Amps, contractor type-E contractor rating 70 Amps catno-NASACT4LENM.Make :- BCH

Taking down the unserviceable Starter from the existing panel and Citation Fully Automatic Star delta starter with citation M Contactor and pneumatic timerssuitable for 120 HP,90KW , three phase,415 Volt,50 Hz,Overhead relay range 100 -150 Amps, contractor type-M-5 contractor rating 180 Amps catno-NASACT4LENM.Make :- BCH

Taking down the unserviceable Citation Fully Automatic Star delta starter with citation M Contactor and pneumatic timerssuitable for 150 HP,110KW , three phase,415 Volt,50 Hz,Overhead relay range 84.6 -135 Amps, contractor type-N contractor rating 140 Amps catno-NASACT4LENM.Make :- BCH

Taking down the unserviceable Starter from the existing panel and MU-G 15 DOL Star-Delta Starter for 10 HP squrrel cage induction motor Make L&TCat no CS94901, C&S, Havells or equivalent

Taking down the unserviceable Starter from the existing panel and MN 16 DOL Starter for 3/ 5 HP Motor L&TCat no SS94351, C&S, Havells or equivalent

4 Pole Power Contactors - Type MCX 4 Pole Power Contactors [8536] l Range from 16A contactor Make: L & T/C&S/Havells or equivalent

4 Pole Power Contactors - Type MCX 4 Pole Power Contactors [8536] l Range from 160A contactor Make: L & T/C&S/Havells or equivalent

4 Pole Power Contactors - Type MCX 4 Pole Power Contactors [8536] l Range from 100A contactor Make: L & T/C&S/Havells or equivalent

Taking out unserviceable air compressor twin lobe blower type 15 HP 1440 RPM, 3 phase 440Volt capacity 300 Cu ft/min from Pump House and carring out overhauling of air compressor with replacement of following spare parts , greasing, varnishing and alike testing complete of capacity

Supply for repair Bearing suitable 15 HP Blower.

Supply for repair Oil Seal uitable 15 HP Blower.

Supply for repair Oil Packing uitable 15 HP Blower.

Supply for repair Gear Hub uitable 15 HP Blower.

Supply for repair Gear Set uitable 15 HP Blower.

Supply for repairRotar Set uitable 15 HP Blower.

Repair,Maintenance , Servicing of electrical actuator suitable for undermentioned line disconnecting electrical connection, removing the actuator from the butterfly valve, cleaning using cotton / sand paper etc., greasing for wear & tear, refixing, reconnecting & testing for the following sizes all as directed.Location MIDC Pump House,A-II Pump House

Maintenance /Servicing of Solenoid valve i.e. disconnecting electrical connection, dismantling, cleaning, refixing with Teflon tape, installation, reconnecting and testing as directed.Location MIDC Pump House,A-II Pump House

Maintenance /Servicing of Pressure Switch i.e. disconnecting electrical connection, dismantling, cleaning, refixing with Teflon tape, installation, reconnecting and testing as directed.Location MIDC Pump House,A-II Pump House.

Taking down the unserviceable motor operated actuated butterfly valve of size 150/200/300 mm dia from the existing scada line.

Supply and fixing testing and Commissioning of Regulating Motor Actuated Butterfly valve with the following specifications including all accessories as required a) Valve size: 150 mm dia. b) Designed line pressure: 4 kg/sq cm. c) Operating Angle: 90 degrees d) Disc Material: C.I. with nylon coating e) Limit switches: 02 nos. for open and close f)Type: Direct on line Make: RITE TORK / HASEL HOFENER/MARSH AUTOMATION

Supply & fixing testing and Commissioning of Regulating Motor Actuated Butterfly valve with the following specifications including all accessories as required a) Valve size: 200 mm dia. b) Designed line pressure: 4 kg/sq cm. c) Operating Angle: 90 degrees d) Disc Material: C.I. with nylon coating e) Limit switches: 02 nos. for open and close f)Type: Indirect on line Make: RITE TORK / HASEL HOFENER/MARSH AUTOMATION

Supply & fixing testing and Commissioning of Regulating Motor Actuated Butterfly valve with the following specifications including all accessories as required a) Valve size: 300 mm dia. b) Designed line pressure: 4 kg/sq cm. c) Operating Angle: 90 degrees d) Disc Material: C.I. with nylon coating e) Limit switches: 02 nos. for open and close f)Type: Indirect on line Make: RITE TORK / HASEL HOFENER/MARSH AUTOMATION

Taking down the unserviceable level sensor and Supply and fixing testing and Commissioning of Ultrasonic Level sensor suitable for 5 meter depth along with digital level indicator and all necessary installation accessories. Make: SBEM/BANNER/NIVELCO/E+H

Taking down the unserviceable Butterfly valve of size 80mm/100 mm/150mm/250 mm/300mm.

supply and fixing Gear control disc design double flange Butterfly valve of size 80mm PN-10 Make : AUDCO,L&T/Cair

supply and fixing Gear control disc design double flange Butterfly valve of size 100mm PN-10 Make : AUDCO,L&T/Cair

supply and fixing Gear control disc design double flange Butterfly valve of size 150mm PN-10 Make : AUDCO,L&T/Cair

supply and fixing Gear control disc design double flange Butterfly valve of size 200mm PN-10 Make : AUDCO,L&T/Cair

supply and fixing Gear control disc design double flange Butterfly valve of size 250mm PN-10 Make : AUDCO,L&T/Cair

supply and fixing Gear control disc design double flange Butterfly valve of size 300mm PN-10 Make : AUDCO,L&T/Cair

Taking down the unserviceable Solenoid valve and Supply & fixing in repairs of Solenoid valve of size 10 mm.Make : Avcon/Johnson Control

Taking down the unserviceable motorised valve and Supply & fixing in repairs of priming motorised valve of size 25 mm.Make : Avcon/Johnson Control/Marsh

Taking down the unserviceable Pressure switch and Supply & fixing in repairs of Pressure switch 0 - 10 kg/sq.cm.Make : Danfoss/Indfoss

Material and labour for Panel Wiring, Installation & testing PLC Programming.

Taking down the unserviceable Relay and Supply & fixing in repairs of Relay– 4 C/O, 24 V D.C.Make : IDEC/Leone

Taking down the unserviceable Relay and Supply & fixing in repairs of Relay– 4 C/O , 230 V A.C.Make : IDEC/Leone

Taking down the unserviceable Push Button and Supply & fixing in repairs of Push Button with LED Indicator-240VAC Color : Red / Green Make : Telemecanique/Schneider

Taking down the unserviceable LED Indictor and Supply & fixing LED Indictor-24 VDC / 230 VAC ,Color : Red,Yellow,Blue Make : Telemecanique/Schneider

Taking down the unserviceable Contact and Supply and fix in replacement only NO (Normaly Open) Contact - 240V A.C. 3 A all as specified.(Make : Telemecanique/Schneider

Taking down the unserviceable SMPS and Supply & fixing in repairs of SMPS 24 V DC 5A Make: NHP/Telemecanique

Taking down the unserviceable Transformer 12V and Supply & fixing in repairs of Transformer 12V Make: AIM

Taking down the unserviceableWater level controller 5 level and Supply & fixing in repairs of Water level controller 5 level Make: Jagadguru Enterprises

Taking down the unserviceable MCB DP,6 Amp and Supply & fixing in repairs of MCB DP,6 Amp Make:Schneider/L&T/Legrand

Taking down the unserviceable single phase motor and suitable for actuator for 80 mm/100 mm/150 mm/200 mm/250 mm/300 mm dia Butterfly valve

Supply & fixing in repairs of electric motor suitable for actuator for 80 mm/100 mm dia Butterfly valve. Must be Compatible with existing actuator .Make: Ritetork or equivalent

Supply & fixing in repairs of Electric motor suitable for actuator for 150 mm/200 mm dia. Butterfly valve. Must be Compatible with existing actuator Make: Ritetork or equivalent

Supply & fixing in repairs of Electric motor suitable for actuator for 250mm/300 mm dia. Butterfly valve. Must be Compatible with existing actuator Make: Ritetork or equivalent

Taking down the unserviceable Hand wheel and Supply & fixing in repairs of Hand wheel for Actuator suitable for for 80 mm/100 mm/150mm/200mm/250mm/300 mm Butterfly Valve.

Taking down the unserviceable Limit Switch and Supply & fixing in repairs of Limit Switch for Actuator suitable for for 80 mm/100 mm/150mm/200mm/250mm/300 mm Butterfly Valve.Make: CHERRY or equivalent

Taking down the unserviceable Resistance / Capacitor and Supply & fixing in repairs of Resistance / Capacitor suitable for actuator for 80 mm/100 mm/150mm/200mm/250mm/300 mm butterfly valve.

Taking down the unserviceable Top cover for Actuator and Supply and fix in replacement of Top cover for Actuator suitable for 50 / 80 / 100 / 150/200/250/300mm dia Butterfly Valve complete all as specified.

Taking down the unserviceable LCD/LED display HMI Human machine and Supply & fixing of 2 line LCD/LED display HMI Human machine interference for PLC based panel.Make: Mitsubishi/schneider/Allen Brodley

Taking down the unserviceable GPRS communication modem and Supply & fixing in repairs / replacement of GPRS communication modem Complete as specified and directed. Make : Modem: MAESTRO HERITAGE / LEO

Taking down the unserviceable copper cable of any size /type complet all as directed.

Supply and fixing in repairs 4 core 1.5 sq. mm. PVC insulated and PVC sheathed armored copper cable etc. as reqd.Make: Polycab/FSC/Havells

Supply and fixing in repairs 6 core 1.5 sq. mm. PVC insulated and PVC sheathed armored copper cable etc. as reqd.Make: Polycab/FSC/Havells

AMC for Scada system for A--II and MIDC Pump house through authorised service agency of RDS.The scope of work include:- (a) Servicing/Maintenance/Repair of Mechanical & Electrical parts of Motor actuated butterfly valves. (b) Servicing/Maintenance/Repair of electrical & electronic parts & components of the Existing PLC based control panel and Existing Motorized valve. (i) Monthly checking of the operation of the entire automation system. (ii)Routine quarterly servicing of all serviceable component of the automated system. (iii) Attending to emergency calls and rectification of the fault there of. (iv) The scope of work however exclude repair/replacement to the armoured copper cable (2core x 1.5sq.mm, 4core x 1.5sq.mm, 6core x 1.5sq.mm, 5 pair x 0.5mm dia. Communication cable) (v) All other spares if require being replace shall be given by department or paid separately. (vi) The contract shall be valid for 11 months. (vii) The automated system shall be thoroughly checked every month for its smooth operation. (viii) Wifi need to be recharged for every six months it is included in this quoted rate.

Supply and fix in repair to panel at Alkapuri area for monitoring and control for PLC based panel of 2 nos motorised valves and 02 nos ultrasonic level sensors. The scope lof work includes necessary I/O cards, relays, relay base, indicator lamps, mounting rack, SMPS power supply, transformer and internal wiring ,lugs etc. drilling tapping work and necessary labeling as regd with Indoor type arrangement for panel and execution of work all as directed by Engineer in charge.PRICE SCHEBRLE. The upgraded PLC based Panel shall be integrated with the new SCADA system using GPRS communication Modem.

Supply and fix in repairs panel at MIDC Pump house area for monitoring and control for PLC based panel 03 nos. Pumps, 03 no. pressure switches, 03 nos. solenoid valves, 03 nos. priming valves, 06 nos motorised valves and 01 no. ultrasonic level sensors. The scope of work includesn ecessary I/0 cards, relays, relay base, indicator lamps, mounting rack, SMPS power supply, transformer and internal wiring ,lugs ete. drilling tapping work and necessary labeling as reqd with indoor type arrangement for panel. Execution of work all as directed by Engineer:The upgraded PLC based Panel shall be integrated with the new SCADA system using GPRS communication Modem.

Supply and fiX in repair to panel at A2 Pump house area for monitoring and contro for PLC based panel 05 nos. Pumps, 05 no. pressure switches, 05 nos. solenoid valves, 05 nos. priming valves, 08 nos motorised valves and 02 nos ultrasonic level,sensors The scope of work includes ncessary internal wiring, I/O cards, relays, rela,base, indicator lamps, mnounting rack, SMPS power supply, transformer and lugs,etc. drilling tapping work and necessary labeling as reqd. Executin of work as,directed by Engineer in charge.The upgraded PLC based Panel shall be integrated with the new SCADA system using GPRS communication Modem.

Taking down the unserviceable Starter from the existing panel and Citation Fully Automatic Star delta starter with citation M Contactor and pneumatic timerssuitable for 100 HP,90KW , three phase,415 Volt,50 Hz,Overhead relay range 100 -150 Amps, contractor type-M-5 contractor rating 180 Amps catno-NASACT4LENM. Make :- BCH

Supply and fix in repair to panel at OHT of A2 Pump house area for monitoring and Control for PLC based panel 02 nos motorised valves and 01 nos ultrasonic level,sensors. The scope of work includes providing necessary internal wiring, I/0 cards,relays, relay base, indicator lamps, mounting rack, SMPS power supply, transformer,and internal wiring lugs etc. drilling tapping work and necessary labeling as reqd with Outdoor type arrangement for panel.Execution of work all as directed by Engr-in -charge The upgraded PLC based Panel shall be integrated with the new SCADA system using GPRS communication Modem.

Crown Chemicals (BID ID -3409492)