Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.8 LAccepted-AOC P O P S UDALGURI WARD NO 2 DIST UDALGURI BTC ASSAM | UDALGURI | ASSAM | 784113 | ₹33.8 L Quoted ₹1.0 Cr | L1 | Accepted-AOC Stand as L1 |
| 2 | L1₹33.9 LAccepted-AOC | ₹33.9 L Quoted ₹1.0 Cr | L1 | Accepted-AOC Stand as L1 |
| 3 | L1₹33.9 LAccepted-AOC | ₹33.9 L Quoted ₹1.0 Cr | L1 | Accepted-AOC Stand as L1 |
| 4 | L2₹1.0 Cr+₹0.84 (<0.01%)Rejected-AOC | ₹1.0 Cr+₹0.84 (<0.01%) | L2 | Rejected-AOC Stand as L2 |
| 5 | L3₹1.1 Cr+₹11.3 L (11.1%)Rejected-AOC | ₹1.1 Cr+₹11.3 L (11.1%) | L3 | Rejected-AOC Stand as L3 |
Tender Value
₹1.1 Cr
EMD Value
₹2.3 L
Closing Date
24 Sept 2018, 3:30 pmClosed
Addl. Chief Engineer, K.Z W.R. Deptt.
Addl. Chief Engineer, K.Z W.R. Deptt. BTC, KOkrajhar
Immediate measures to restoration works at village Phuhurabari from river Pagla under S.D.R.F. for the year 2017-18
2018_BTCWR_8649_11
AdlCEKZWRAC104/1439dt.12.09.18
Open Tender
Civil Works
Item Rate
60 days
Phuhurabari (Udalguri)
Please refer to tender documents
4 documents required · 4 mandatory
₹5,000
Executive Engineer, Baksa W.R. Division, Mushalpur
₹2.3 L
Yes
4 May 2021
15 Sept 2018
24 Sept 2018
15 Sept 2018
24 Sept 2018
19 Sept 2018
Amount
Supply of Geo- textile bags of type –A (1.03 x 0.70m) made of Geo textile non-woven fabric sheets of 400 GSM manufactured from 100% virgin polypropylene (PP) fibre with minimum properties as (i) Tensile strength ≥ 12.4 KN/m (ii) Mass ≥400.00 Gm/m2 (iii) CBR Puncture strength ≥1550 N/m2 (iv) Elongation @ break (Warp) ≥ 54% (v) Elongation @ break (Weft) 52% (vi) Abrasion ≥ 70% (vii) UV Resistance @ 500 hours ≥ 70% (viii) AOS ≤ 75 micron (ix)(Permittivity) ≥ 1.25 (x) Trapezoidal Tear Strength ≤ 340 N (xi) permeability = 2.00 x 10-3 m/sec (xii) Seam strength = 80% of geo textiles strength. Stitching of Bags should be Ring Spun yarn stitches. With 2500 – 3000 denier double line chain stitch with overlaps with stitches along the edge @ minimum 15 stitches per 100 mm. (Bages are to be supplied of100 numbers or part in a bundle, properly packed with name of Manufacture and Batch number is to be marked on each bag with “WRD Govt of Assam” to be printed on each bag and mentioning properly the GSM and type of Geo bag polymer. Test Certificate from approved NABL accredited and ISO Certified Laboratory should in variably be submitted against each batch of material.)
Supply of galvd. Wire netting sheets made of 8G. wire of 152 mm (6”) square mesh in sheet of overall size 2.57m x 1.66 m. (8’-6” x 5’ - 6”) including 76 mm. projection of each wire on all sizes beyond the net size (8' x 5') 2.42m x 1.50m having nots of 12 gauge at every joint including loading, unloading and stacking properly etc. complete as directed by the deptt., (Tax extra).
Filling and laying in cage with sand filled Geo bags of size1.03 x 0.70m. including excavation of specified sand from flood plain or adjacent chars within a distance of 90m. of the work site, filling geo bags with sand weighing 126.00Kg. after filling, stitching the mouth of the filled bags with polypropylene or polyester thread by power driven double needle machine, stacking the same in batches of 100, carrying the same to the dumping site including all handling charges and local carriage within a distance of 150m. and laying properly in cages made of wire netting sheets of size 2.57x1.66m. of 8G. galvanized wire making the cage from 2 nos. of wire netting sheets by tying the projected wires complete as directed (Geo bag Wire Netting sheets and polypropylene/ polyester thread will be supplied by the department free of cost)
Supply of special threads for Geo-bags to meet 4 rows of type 101) Stitch on the top/open end of bag after filling the materials and specification etc. (Inclussive of labour 1% cess).
Supply of R.C.C. Porcupine member of size 0.10m × 0.10m × 2.00m with cement concrete proportion 1 :2:4, reinforced by 4 Nos. of 8mm dia TMT bar. and 4mm dia (8G) wire stirrups at 15cm. C/C with 2 (two) nos of holes of 20mm dia at 50 cm inside from both sides in the same face and in the other face of member another 2 (two) nos. of holes of size 20mm dia at 65 cm inside from both ends including properly curing for 28 days and supply at work site complete as directed. (Date of casting and Name of Supplier should be engraved on the members.)
Labour charge for launching of R.C.C. Porcupine including carriage of R.C.C. porcupine members of size 0.10m × 0.10m × 2.00m from the stack yard to the place of launching ,erection of the Porcupine with 6 (six) members properly, supply & fitting/fixing with 12 mm dia , 25 Cm long M.S. Nuts and bolts and launching the porcupine properly as directed. (Lead up to 200 m)
Clearing light jungles and trees up to 50 cm. girth including Cutting, uprooting roots and stumps, removing them from the site of the work, etc. complete as directed.
Supplying and launching bamboo tops of 3.00m. To 3.50m long with green foliage tied to the post of 'A' type of spur, lets fencing pallasiding etc. with 12G G.I. wire etc. complete as directed
Sri Minon Mochahari
SONESWAR WARY
Md Gafur
Sri Somla Daimary
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .