C/o 45.00 meter and 67.30 meter Span Bridge with Carriage Way 7.50 meter on Markanda River Dhimki Temple at 0/15 and Kanyon Ka Khala on Dhimki Mandir at RD 0/270

Amount

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete including all leads, lifts and carriage of materials and other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

Finishing wall with weather proof exterior grade emulsion of approved design(Apexultima) or its equarlied on undecorated wall surface(two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth complete including all leads, lifts and carriage of materials and other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

Providing and laying of hot applied theremoplastic compound 2.5mm thick including refectorising glass beeds @250 gms per sign area, thickness of 2.5mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level uniformly and free from streaks and holes including all leads, lifts and carriage of materials and other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

Supplying and Installation of delinators (road way indicators hazard makers, object markaers) 80-100 cm high above ground level, painted black and white in 15cm wide strips, fitted with 80x100 mm rectangular of 75mm dia circular reflectorised panels at the top, buried or pressed into the ground and conforming to IRC -79 and the drawings.

Providing and fixing of road stud 100 x 100 mm die cast in aluminium, resistant to corrosive effect of salt and grit, fitted with lense reflectors, installed in concrete or asphaltic surface by drilling holes 30 mm upto a depth of 600 mm and bedded in a suitable bituminous grout or epoxy mortar, all as per BS:873 (Part 4) 1973.including all leads, lifts and carriage of materials and other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

Providing and erecting direction and place identification retro-reflectorised sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3, fixed over aluminium sheeting, 2 mm thick with area not exceeding 0.9 sqm supported on a mild steel single angle iron post 75 x 75 x 6 mm firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 450 x 450 x 600 mm, 600 mm below ground level as per approved drawing and Technical Specification Clause 1701including all leads, lifts and carriage of materials and other incidental charges complete as per entire satisfaction of the Engineer-in-charge.

natta ram

DINESH KUMAR GUPTA