E Tender No 68/EDC(Kashipur)/2023-24

Supply Item

Supply of Suspension Clamps With I Hook. (As Per Specification & Drawing of UPCL)

Supply of M.S Clamp for Distribution Box with nut and bolts and washer. (As Per Specification & Drawing of UPCL)

Supply of L.T Clamp for Distribution Box. (As Per Specification & Drawing of UPCL)

Supply of Stay clamp for PCC Pole duly Red Oxide Painted with Nut and Bolts and washer. (As per Specification & Drawing of UPCL)

Supply of Dead End Clamps With I Hook. (As Per Specification & Drawing of UPCL)

Supply of Mid Span Insulator J. sleeve for LT ABC. (As Per Specification & Drawing of UPCL)

Supply of SMC Three Phase L.T. Distribution Box for connection of LT consumer With in built Panel Lock with key, Al bus bar RYB 25x6 mm & Al bus bar N 40x6 mm. MAKE- (SINTEX/Other IS Complied Reputed Company)

Supply of Shear Head type Insulated Piercing Connector body moulded from high quality mechanical Climate and UV resistant glass reinforced polyamide hot dipped galvanized bolts & contact teeth ABC size 70 Sq mm to 70 sq mm. MAKE- (TYCO/RPG/3M/SICAME/ENSTO)

Supply of L.T. Bare Neutral Connectors PG Clamp for D.B 50 sq mm to 50 sq mm. (As Per Specification & Drawing of UPCL)

Supply of IPC 70 Sqmm to 25 Sqmm for D.Box. (As Per Specification & Drawing of UPCL)

Supply of Head Shrink Type end caps for LT ABC. (As Per Specification & Drawing of UPCL)

Supply of PG Clampfor neutral 50-25 mm. (As Per Specification & Drawing of UPCL)

Supply of LT XLPE AB Cable Size (3x95+1x50 Sq.mm) (As Per Specification & Drawing of UPCL)

Supply of Aluminium Crimping Lug Size 25 sq mm made of best Quality Pore Line and Without Defeets ISI Standerd. (As Per Specification & Drawing of UPCL)

Supply of Aluminum Lugs 'O' type size 95 mm. (As Per Specification & Drawing of UPCL)

Pole & LT AB Cable Work

Cartage of Following Material by private truck from store centre Rudrapur /Haldwani/ Kashipur to dump store approx. distance 21 to 50 Km. including loading into truck and unloading at road work site.

PCC Pole

Small Line Material including Conductor

Head Load Cartage of Following Material approx. distance 0 to 1 Km. including loading unloading.

PCC Pole

Small Line Material including Conductor

Fixing of M.S. earthing rod 20×2500 mm for earthing of support as per RESPO drawing No. RES-12 including digging earth rod 0.3 m deep below ground level connected to support with earth wire 16 swg fixing of all accessories in all respect as per Specification of UPCL.

Excavation of earth for Stay set pit of size 0.6x0.6x1.2 Mtr Length in all type of soil including proper dressing of sides and ramming of bottom including getting out soil and disposal of surplus excavation soil as directed complete work in all respect.

Erection of Follwing Pole Structure after digging of pit size 0.6×0.6 mtrs & 1/6 length of support on 300×300×75 mm stone pad including fixing with all accessories complete in all respect as per Specification of UPCL.

Single PCC Pole Structure.

Dismantling of following Old ACSR Conductor from Existing LT Line including Re- rolling back its conductor,wire,clamp, insulator, any other wire or items etc.including stacking and transportation of material to the UPCL Central stores.

1 Phase 2 wire

2 Phase 3 wire

3 Phase 4 wire

Laying,Stringing and sagging of LT A.B Cable size (3x95+1x70 sq.mm) complete in all respect as per Specification of UPCL.

Labour Charges For Single Phase of Disconnection & Re-Connection of L.T.Consumer Service Connection.as per norms of UPCL.

Labour Charges For Three Phase of Disconnection & Re-Connection of L.T.Consumer Service Connection.as per norms of UPCL.

Installation of Distribution Box.

Fixing of Suspension Clamp.

Laying of LT Cable 4x16 sq.mm

Fixing of PG Clamp 95-95 Sq.mm

Fixing of PG Clamp 95-70 Sq.mm

Excav. Erect. Of Stay Set Complete work.

Supply and Fixing of Jointing Sleeves.

Supply and Fixing of Dead End Clamp

Supply and Fixing of PRC L2L 95-95

Supply and Fixing of PRC L2L 120-120

Looping and Chopping of Tree Branches

UTTARANCHAL ENTERPRISES