PROVN OF SPDS, CHANGE OVER SWITCHES AND EARTHING PITS, SPECIAL REPAIR/ REPLACEMENT OF OLD UNSERVICEABLE FOUNTAIN LIGHTS WITH LED LIGHTS AND CONNECTED ITEMS AND SPECIAL REPAIR/ REPLACEMENT OF OLD UNSERVICEABLE DEFECTIVE FIRE DETECTOR AND FIRE A

Amount

M & L chemical Earthing complete with copper plate electrode (98 percent conductivity when annealed) 900 mm 600 mm x5 mm thick buried directly in groound (Earth pit not less than 3.5 meters deep below normal ground level and 1.3 mtr wide) with top edge of the plate not less than 1.5 mtr below ground level earth plate connected to copper strip (98 percent conductivity when annealed) 32 x6 mm (drawn in and including earth lead protection pipe light grade GI OF size 50 mm dia ) by means brazing at both edges with vertical plane of electrode all as shown in plate No 2 of SSR Part I connected to earthing lead, filling with Charcoal 400 KG, dust and common salt 325 KG and Magnesium sulphate 100 KG, necessary excavation and earth work in any type of soil, perforated watering pipe, funnel with wire mesh, earth lead work in any type of soil, perforated watering pipe, funnel with wire mesh, earth lead work in any type of soil, perforated watering pipe, funnel with wire mesh, earth lead protection pipe light grade PCC Chamber 1:3:6 type C1 (for even finish on both the faces) and RCC cover 1:2:4 type B1, 550 x 550x50 mm thick with 6 mm dia CTD bars 150 mm c/c with 2 nos of handles of 10 mm dia steel rod 500 mm long all as specified and directed and testing on completion and connected to equipment with lugs and connected to equipment with lugs and screw nuts etc complete all as specified and as directed. Note: (i) Item includes the cost of 7.5 metre GI pipe for protection of earth lead. (ii) Earth resistance of earth pit should be less than 0.5 Ohms. On testing after completion if the desired resistance in not obtained the earthing will be redone at no extra cost.

Supply and fix in replacement of copper strip of existing size 32 x 6 mm with saddles and fixing screws etc for earthing connection to bus bar trunking system of existing LT Panels etc complete all as specified and directed by Engr-in-Charge.

S&F PVC insulated unsheathed multi stranded copper conductor single core of capacity 4 sqmm FRLSH cable complete all as specified and directed by Eng-In-Charge.

Supply and lay and testing cable LT XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured,(Heavy duty) electric power cable heavy duty with standerd aluminum conductor, 1100 Volts grade, of size 95 Sqmm 3.5 Core complete all as specified and as directed.

Supply and fix ON load change over switch of 400 Amp Capacity with Steel sheet enclosure complete all as specified and directed by Eng-In- Charge.

S&F Rigid non- metallic PVC Conduit 20mm exclusive of boxes (junction terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing on wall including all accessories such as clamp, couplers, lock nuts, saddles, pipe hooks etc. complete all as specified and directed.

S& F SPD (surge protection device) Single phase two pole Uc-260V AC Up-1.5 KA, In-20 KA, I max-40 KA inclluding PVC 2 way box with electric connection with suitable cable complete all as specified and directed by Engr-in-Charge.

Supply and fix 1.5 Sqmm three core PVC insulated, unsheathed multistranded copper conductor flexible cable 1100 volts grade, from junction box to street light fitting complete all as specified and directed by Engr in Charge.

Supply and fix of copper strip of existing size 25 x 3.15 mm with saddles and fixing screws etc complete all as specified and directed by Engr-in-Charge.

S&F PVC insulated round / flat cable ISI marked with multi stranded copper conductor 1100 volt grade of size 2.5 Sqmm 3 core including taking down complete all as specified and directed.

Supply and fix in repair 100 Watt LED flood light with pressure die- cast aluminium housing, complete with all accessories, Energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium IP66 flood light with high power LEDs as light source, suitable for highlighting architectural facade highmast and general purposelighting W Turo Floodlight luminaires with secondary optics made in pressure die cast housing and heat sink in aluminium extrusion and IP 66 Protection fixed in existing clamp and connecting with cable, including nuts, bolts and washer and taking down etc complete all as specified and directed.

Supply and fix in repair 150 Watt LED flood light with pressure die- cast aluminium housing, complete with all accessories, Energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium IP66 flood light with high power LEDs as light source, suitable for highlighting architectural facade highmast and general purposelighting W Turo Floodlight luminaires with secondary optics made in pressure die cast housing and heat sink in aluminium extrusion and IP 66 Protection fixed in existing clamp and connecting with cable, including nuts, bolts and washer and taking down etc complete all as specified and directed.

Supply and fix 30 Watt LED flood light multi colour/Cool white / warm with pressure die- cast aluminium housing, complete with all accessories, Energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium IP66 flood light with high power LEDs as light source, suitable for highlighting architectural facade highmast and general purposelighting W Turo Floodlight luminaires with secondary optics made in pressure die cast housing and heat sink in aluminium extrusion and IP 66 Protection fixed in existing clamp and connecting with cable, including nuts, bolts and washer and taking down etc complete all as specified and directed.

S&F LED 9 watt, 9X1W colourful water proof underwater submersible Fountain lights in RGB Combination of colours, IP 68, fountain Lights, Stainless steel, CCT-3000K with Automatic Controller System of 9 W 3 LED BIG including taking down complete all as specified and directed by Engineer-in-Charge.

S&F SMPS (Rain prooof LED Power supply) input supply AC 190 to 260 volt and out put voltage 12 Volt DC + 5% Out put power 500 watt, Aluminum body, IP 65, protection:- overvoltage, over current including taking down complete all as specified and directed by Engr-in-Charge.

S & F in replacement Intelligent Plug in Photoelectric Smoke & Heat Detectors with Base for Addressable fire alarm panel as per existing sample complete all as specified and directed.

S & F in replacement Intelligent Plug in multi detectors with isolator for Addressable fire alarm panel as per existing sample complete all as specified and directed.

S & F in replacement MCP resettable for Addressable fire alarm panel as per existing sample complete all as specified and directed.

S & F in replacement hooter cum flasher for Addressable fire alarm panel as per existing sample complete all as specified and directed.

S & F in replacement stranded plain annealed coper conductor cable 1.5 sqmm 2 core Cl.1, to BS EN 60288. for fire alarm , smock & heat multi detector as per existing sample complete all as specified and directed.

Supply and fixing in replacement of fabricated outdoor/ indoor type hose cabinet on wall/ PCC foundation as required size made out of 18 gauge MS Sheet of size 800X600X200 mm with double door with 4 mm thick glasses and door frame made of 16 gauge MS sheet painted fire red with door lock two keys complete all as specified and directed.

Supply and fixing in replacement of first - Aid hose reel drum swinging mounted type brackets comprising rubber hose 19 mm dia 30m long high pressure double braided bearing IS-884 type-2, with shut off nozzle and hose reel drum connection to wet riser pipe with 25 mm gun metal inlet valve complete all as specified and directed.

Supply and fixing in replacement of Fire alarm control panel complying with BS EN 54, 4 loop panel suitable for 99 detectors & 99 modules & upto 200 detectors and modules per loop complete all as specified and directed.

Supply and fixing in replacement of RRL 63 mm dia 15 meter long hose conforming to IS 636 with S/S male and female coupling conforming to IS 903 complete all as specified and directed.

Supply and fixing in replacement of fire hydrant landing valve type A (single head outlet) of 63 mm dia conforming to IS 5290 complete all as specified and directed.

Supply and fixing in replacement of S/S branch pipe 63 mm dia male instantaneous inlet threaded outlet fitted nozzle of 20 mm dia heavy duty conforming to IS -903 complete all as specified and directed.

Supply and fixing in replacement 20 mm dia for hose reel jet spray shut off valve with nozzle complete all as specified and directed.

M&L for point wiring with 1.5 Sqmm single core PVC insulated unsheathed multi stranded copper conductor FRLS cable 1100V grade drawn through and incl PVC casing in capping /conduit with accessories like bends tees, junction boxes etc fixed recessed in wall or ceiling etc including 1.5 Sqmm single core PVC insulated but unsheathed multistrandard copper conductor FRLS cable 1100V grade as earth continuity wire incl sunken type pressed steel terminal boxes of size with 3mm thick bakelite steel white/coloured top cover for One light/fan/bell point controlled by one switch complete all as specified and directed by Eng-In-Charge. :-

All as per item No 28 here in before but one 3 Pin socket out let 5 Amps on the same board.

All as per item No 28 here in before but one 3 pin socket out let 5 Amps on the independent board.

All as per item No 28 here in before but 2.5 sq mm wire for 15 amps power plug point complete all as specified and directed.

Supply & Fix Switch piano type 230 volts, 5 Amps, single pole complete all as specified and directed by Eng-In-Charge.

Supply & Fix Socket out let 2 in 1, 3 pin, 5 Amps flush type 230 volts complete all as specified and directed by Eng-In-Charge.

Supply & Fix switch socket combined universal 2 in 1, 6 pin, 15 Amps complete all as specified and directed by Eng-In-Charge.

Supply & Fix switch socket combined universal 2 in 1, 6 pin, 5Amps complete all as specified and directed by Eng-In-Charge.

Supply & fix bell push 5 Amps flush type complete all as specified and directed by Eng-In-Charge.

Supply & fix ceiling rose 3 terminal/ poly carbonate, isolated body complete all as specified and directed by Eng-In-Charge.

Supply & fix Lamp holder/angle holder, insulated body with back plate for battern fitting complete all as specified and directed by Eng-In-Charge.

Supply & fix 3 pin plug top 6A, 240 V complete all as specified and directed by Eng-In-Charge.

Supply & fix 3 pin plug top 16A, 240 V complete all as specified and directed by Eng-In-Charge.

S & F white acrylic plate size 8"x6" complete all as specified and directed by Eng-In-Charge.

S & F white acrylic plate size 12"x10" complete all as specified and directed by Eng-In-Charge.

M&L for Sub main wiring complete with two run of 16 Sqmm single core, PVC insulated but unsheathed, multistranded copper conductor FRLS 1100 Volts grade cable drawn through in and including non metallic, rigid, PVC heavy duty surface conduit/casing capping (ISI marked) with wall thickness not less than 1.8mm complete with all accessories like bends, tees, junction boxes fixed on wall, ceiling and incl sunken type pressed steel terminal boxes with 3mm thick bakelite white/coloured (as approved) top cover including 10 Sqmm single core PVC insulated but unsheathed multistandard copper conductor FRLS 1100 Volts grade cable as earth continuity wire and connected to earth dolly . Note :- Two run of 6 Sqmm cable incl one run of earth wire and PVC conduit and its accessories shall be measured and paid as one length complete all as specified and directed by Eng-In-Charge.

M&L for Sub main wiring complete with two run of 6 Sqmm single core, PVC insulated but unsheathed, multistranded copper conductor FRLS 1100 Volts grade cable drawn through in and including non metallic, rigid, PVC heavy duty surface conduit/casing capping (ISI marked) with wall thickness not less than 1.8mm complete with all accessories like bends, tees, junction boxes fixed on wall, ceiling and incl sunken type pressed steel terminal boxes with 3mm thick bakelite white/coloured (as approved) top cover including 6 Sqmm single core PVC insulated but unsheathed multistandard copper conductor FRLS 1100 Volts grade cable as earth continuity wire and connected to earth dolly . Note :- Two run of 6 Sqmm cable incl one run of earth wire and PVC conduit and its accessories shall be measured and paid as one length. complete all as specified and directed by Eng-In-Charge.

M&L of sub main wiring complete with PVC insulated cable two run of 04 Sq mm (FRLS) 1100 volts grade with multi stranded copper conductor for drawn through and including PVC casing -capping with accessories incl 4 Sq mm unsheathed multi stranded copper conductor as on earth wire complete all as specified and directed by Eng-In-Charge. Note :- Two runs of 4 sqmm cable with one run of earth continuity cable including PVC casing -capping and its accessories will be measured and paid as one unit

S&F Casing capping patti of any size up to 50 mm dia including all its tee, bends etc of white/ivory/gray colour complete all as specified and directed by Eng-In-Charge.

Supply and fixing TPN double door DB 4 way incl civil work complete all as specified and directed by Eng-In-Charge.

Supply and fixing TPN double door vertical distribution board without mccb 4 way incl civil work complete all as specified and directed by Eng-In-Charge.

Supply and fixing sheet metal enclosure, single phase, double door DB, flush to wall mounting for MCB fitted with 200 Amp rated bus bars and neutral links ( without MCB's) 12 ways SPN complete all as specified and directed by Eng-In-Charge.

All as per item No 49 here in before but 8 way.

All as per item No 49 here in before but 4 way.

Supply and fixing factory made single pole and neutral sheet metal enclosure with a two Pin Socket plug and socket with one single pole MCB 240Volts, 20 Amps, capacity complete all as specified and directed by Engineer-in-Charge.

Supply and fixing MCB, TPN 415 volts, 63 Amps capacity complete all as specified and directed by Engineer-in-Charge.

Supply and fixing MCB, SPN 240 volts, 40 to 63 Amps capacity complete all as specified and directed by Engineer-in-Charge.

Supply and fixing MCB, SP 240 volts capacity 5 - 32 Amps current rating, 10KA breaking capacity complete all as specified and directed by Engineer-in-Charge.

Supply & fix MCCB 3/4 Pole 415 V fixed type, 25 to 100 Amps with breaking capacity 16 KA complete all as specified and directed by Eng-In-Charge.

Supply and fixing LED tube light fittings 1x20Watts, 230 volts surface and wall mounted LED type,extruded thermoplastic body with polycarbonate diffuser & integrated electronic driver complete with all accessories and connecting flexible pipe of white color from ceiling rose to light complete all as specified and directed by Eng-In-Charge.

Supply and fix LED security light 25 watt, 240 volt IP 65 protection, weather proof with all other accessories complete all as specified and directed by Eng-In-Charge.

Supply and fix exhaust fan 250/300 mm sweep silent type in PVC Body as required at site complete all as specified and directed by Eng-In-Charge.

Supply and fix exhaust fan, steel body AC single Phase 230V of size 300mm sweep with, blades, and frame and louvers complete all as specified and directed by Eng-In-Charge.

Supply and fix exhaust fan, steel body AC single Phase 230V of size 380mm sweep with, blades, and frame and louvers complete all as specified and directed by Eng-In-Charge.

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. complete all as specified and directed by Eng-In-Charge.

Supply, lay and testing cable LT XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cable heavy duty with stranded aluminum conductor, 1100 Volts grade, of size 25 Sqmm, 4 Core complete all as specified and as directed.

Excavation in trenches n. exc 1.50 meter wide and n. exc. 1.50 meter depth and getting out in soft/ loose soil for taking up/laying cable/pipe etc complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25cm in hard/ dense soil complete all as specified and as directed.

Removing excavated material n. exc. 50m and depositing where directed at a level n. exc. 1.5 m above the starting point complete all as specified and as directed.

Supply and lay high density polyethylen pipes (HDPE) of pressure rating 6 Kgf/cm square laid in trenches of size 40 mm complete all as specified and as directed.

Labour only for disconnecting existing CCR MCB DB and refitting the same to new CCR room and make all connection as per direction of Engineer-in-Charge.

ALBA AC AND REF SERVICES

M/s Matadeen Ramchandra Agarwal