Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹1.4 Cr
EMD Value
₹1.4 L
Closing Date
4 Dec 2026, 6:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Executive Engineer, Arvalli R & B Panchayat Division, Modasa
Construction Of Tenpur to Bhudasan Joining Road Under MMGSY (OWR NORMAL) 2025-26 Ta-Bayad Dist.-Aravalli.
366010
08/2026-27
Open
Civil Works - Roads
Works
Arvalli
₹3,600
Executive Engineer, Panchayat R And B Division, Modasa
₹1.4 L
16 Nov 2026
16 Nov 2026
16 Nov 2026
4 Dec 2026
16 Nov 2026
90 days
Clearing and grubbing road land including uprooting trunk, vegetation, grass bushes, shrubs,
sapling and trees girth upto 300 mm removal of stumps of trees cut earlier and disposal of
1 unservicable materials [C] By Mechanical means in area of light jungle 1.00 28455.10 Hact.
lead and lift (excluding watering and consolidation) (A) From borrow area with all lead and Cmt
lift & CBR not less than
Box cutting the road surface to properslopeand camber for making a base forroad work
3 including removing the excavated stuff and depositing on theroad side slope as directed 855.00 109.05 Cmt
upto50Mt.lead
Rolling of earthwork in layers with vibratory roller 80 Kn to 100 Kn static weight including
4 filling in depressions which occurs during the process. 13527.00 22.88 Cmt
Construction of Grannular sub base of in providing GSB Gr - I coarse graded material using
B.T Metal 26.5mm to 53 mm @ 35 % ,26.5mm to 4.75mm 45o/o & Below 2.36mm 45 %
5 Below 2.36 mm 20% in uniform layer with motor grader on prepared surface mxing by mix 1457.00 1047.88 Cmt
in place method with vibratory roller to achive the desired density complete as per close
Providing, laying spreading and compacting stone aggregates of specific sizes to water
bound macadam (Grade-I) (BT Metal of size 45-90 mm) Specification including spreading
in uniform thickness , hand packing, roalling with 3 wheeled steel / vibratory roller in stages
6 to proper grade and camber , applying and brooming requisite type of screening / binding 587.00 1297.15 Cmt
material to fill up the interstices of coarse aggregate ,watering and compacting to the
required density.
Providing, laying spreading and compacting stone aggregates of specific sizes to water
bound macadam (Grade-II) (BT Metal of size 45-63 mm) Specification including spreading
in uniform thickness , hand packing, roalling with 3 wheeled steel / vibratory roller in stages
to proper grade and camber , applying and brooming requisite type of screening / binding 1095.00 1234.83
material to fill up the interstices of coarse aggregate ,watering and compacting to the
required density.
Providing and compacted Quarry spall for hard side shoulder on road site including
8 collection of material spreading, rolling of waterlng etc. complete as directed. 240.00 549.57 Cmt
Providing & applying evenly Tack coat with bitumen Grade (VG-30) on prepared surface of
9 granular base including cleaning of road surface and sparying primer at the rate of 4.0 Kg. / 5450.00 24.77 Smt
10 Smt using mechanical means.
Providing & laying 37.50 mm thick B.U.S.G. with B.T. aggregates as per M.O.R.T.&H.
specification & bitumen for mixing viscosity grade VG-30 at the rate of 19.90 Kg./M.T.
i.e.1.99 % of total weight of mix including heating the aggregare & asphalt in continuous
10 Drum mix plant and spreading the same by paver finisher and consolidation with vibratory 409.00 2162.01 M.T.
roller including paving all materials equipments, tools & plants, fire wood, oil, kerosene,
labour charges etc complete using contractorrs own machinery batch mix plant & paver
finisher etc. complete.
Providing and laying 37.5 mm thick compacted bitumenous macadam (BM) using crushed
stone aggregate as pcr MORT & H grodation a & VG-30 grade bitumen [with VG-30 as tack
coat 2.5 kg/10 smt] at the rate of 3.40 % by weight of total mix (i.e. 34kg/mt by wt. of total
mix) for binding including heating and mixing the asphalt and aggregates by continuous
drum mix plant and transporting the mix and spreading the same by paver linisher and
consolidation with vibratory road roller including using all necessary equipments, tools,
plants, including cost of all materials, firewood, oil, lubricants, labour charges etc. complete.
Providing & laying 20mm thick premix seal surfacing using specified graded machine
crushed aggregates with VG-30 grade bitumen at the rate of 5.10 % i.e. 51.0 Kg/ M.T. by
weight mix including heating & mixing in drum mix plant transporting the mix spreading
the same by paver finisher and consolidation by vibratory roller as per MORT&H
specification including cost of all materials fuel, labours, tools and plant etc. comp.
Providing and laying cement concrete 1:3:6 (1-Cement: 3 coarse sand 6-hand broken stone
13 aggregates 40 mmnominal size) and curing complete excluding cost of formwork in (A) 322.00 3095.25 Cum
Foundation and Plinth
Description of Item (with brief specification and reference to book of specifications) Quantity Rate In figures Unit Amount
Providing & Laying cement concrete 1:1:5:3 (1 cement : 1:5 course sand : 3 graded stone
aggregate 20 mm nominal size) for C.C. road and curing cost of form work. Finishing the
cement concrete road by trimix process inclusive of labour charges for trimix vacuum
dewatering process on cement concrete road by using vacuum dewatering pump, surface
floater, surface vibrator including channeling & making grooves & rough finish to surface
14 by providing expansion joints, contraction joint & construction joints with fillings of joints 620.00 5435.82 Cmt
with asphalt filler as per direction by engineer incharge & as per specsificaiton.
Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, binding
and placing in position complete upto floor two level
Providing and fixing ordinary Kilometer stone of precast C.C. 1:2:4 including necessary
reinforcement as per I.R.C. type design in C.C. 1:4:8 including painting,lettering etc.
complete (For O.D. road V.R.)
Providing and fixing hectometer as per I.R.C. type design including painting, lettering etc.
Cautionary Warning Sign :-Providing and fixing sing boards made out of 2mm aluminium
sheet; size 90 x 90 x 90 cms. equilateral triangle as per design of IRC-67-1977. Pre treated
with phospheting process & acid etching; coated with one coat of epoxy primer and two
coats of best quality epoxy paint ;reflectorised with retro refiectivesheeting as per latest
M.O.S.T.Specifications; 3.1m long stand postand frame fabricated from suitable sizeiron
angle of 35 x 35 x 3mm, 75 x 75 x 6mm as required; painted with bestquality epoxy coatings
in black andwhite bends. The details of symbol foreach board shall be as per theinstruction
18 of engineer in charge. The fixing at site shall be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. 4.00 3379.55 No
for each leg.including excavation, curing etc.complete under the supervision of engineer in
charge.(A) Engineer Grade(VR)
Village name/ Bump Ahed sign :-Providing and fixing sing boards made out of 2mm
aluminium sheet; size 90 x 60cms. rectangle as as per the design of IRC-67-1977 pre treated
with phospheting process & acid etching; coated with one coat of epoxy primer and two
coats of best quality epoxy paint; reflectorised with retro refiective sheeting as per latest
M.O.S.T. Specifications; Letters and numerals should be as per IRC-30-1968, 3.1m long (2
nos) stand post and frame fabricated from suitable size iron angle of 50 x 50 x 5mm painted
with best quality epoxy coatings in black and white bends. the details of symbol or
19 inscription / numerals for each board shall be as per the instruction of engineer in charge. 4.00 5045.37 No
The fixing at site shall be in 1:2:4 CC block of size 45 x 45 x 60cms. for each leg. including
excavation curing etc. complete under the supervision of engineer in charge.(A) Engineer
Grade(VR)...
Place ideatification sign :-Providing and fixing sing boards made out of 2mm aluminium
sheet; size 150 x 90cms. rectangle as as per the design of IRC-67-1977 pre treated with
phospheting process & acid etching; coated with one coat of epoxy primer and two coats of
best quality epoxy paint; reflectorised with retro refiective sheeting as per latest M.O.S.T.
Specifications; Letters and numerals should be as per IRC-30-1968, 3.1m long (2 nos) stand
post and frame fabricated from suitable size iron angle of 50x50x5mm 75x75x6mm as
required; painted with best quality epoxy coatings in black and white bends. the details of
20 symbol or inscription / numerals for each board shall be as per the instruction of engineer in 1.00 9390.66 No
charge. The fixing at site shall be in 1:2:4 CC block of size 45 x 45 x 60cms. for each leg.
including excavation curing etc. complete under the supervision of engineer in charge.(A)
Engineer Grade(VR)...
Description of Item (with brief specification and reference to book of specifications) Quantity Rate In figures Unit Amount
MMGSY "LOGO" Board : Providing and fixing of MMGSY LOGO informatory sign board
with Logo as per section 1700 of MORD specifications and drawing. The board will be a
composite unit consisting of Two Plates of ACM (Aluminum Composite Material), material
specifications as per clause 17001.3. The top most plate will be of 3mm ACP in diamond
shape of 600x600mm size, riveted with MS angle iron frame of 25mmx25mmx5mm size on
back on edges. The Lower plate will be of 4mm ACP of 1100x300mm size riveted with MS
angle iron frame of 25mmx25mmx5mm size on back on edges. Riveting of atl the sheets
over angle and flat iron frame will be done neatly to have plain surface on one side. The
angle iron frame of Both the plates will be welded to a 75mmx75mmx6mm Mild steel post
at Centre and this post will be embeded in cement concrete Ml5 grade block of
450x450x600mm below ground level. The height of the bottom of the lower plate will be
1200mm from normal ground level. The spacing between the diamond shaped plate and
21 Lower Plate is kept 150mm. MMGSY logo, letters and numerals on the ACM should be 1.00 6784.17 No
made up of Retro Reflective sheeting of Type-l AEGP Class-A grade as per the latest
MORD section 1700 and IRC 67 2012 specifications. Al the section of the frame and posts
shall be painted with primer and two coats of epoxy paint. The design, painting and lettering
shall be done as per the MMGSY Logo sign Design and as directed by Engineer in-charge.
A warranty for 5 years for the Retro reflective sheeting for Type-l Class-A fi'urn oligiual
nranufacturer shall be submitted by contractor.
STOP SIGN:-Providing and fixing sing boards made out of 2mm aluminium sheet; size 90 x
90cms. rectangle as per the design of IRC-67-1977 pre treated with phospheting process &
acid teching; coated with one coat of epoxy primer and two coats of best quality epoxy
paint; reflectorised with retro refiective sheeting as per latest M.O.S.T. Specifications; 3.1m
long stand post and frame fabricated from suitable size iron angle of 35 x 35 x 3mm
75x75x6mm as required; painted with best quality epoxy coatings in black and white bends.
the details of symbol for each board shall be as per the instruction of engineer in charge.
22 The fixing at site shall be in 1:2:4 CC block of size 45 x 45 x 60cms. for each leg. including 2.00 4676.06 No
excavation curing tec. complete under the supervision of engineer in charge.(A) Engineer
Grade(VR)....
Hazard Marker Sign :-Providing and fixing sing boards made out of 2mm aluminium sheet;
size 90 x 30cms. rectangle as as per the design/drawing attached (IRC) pretreated with
phospheting process & acid etching; coated with one coat of epoxy primer and two coats of
best quality epoxy paint; reflectorised with retro refiective sheeting as per latest M.O.S.T.
Specifications; 3.1m long stand post and frame fabricated from suitable size iron angle of
35 x 35 x 3mm & 50 x 50 x 5mm painted with best quality epoxy coatings The fixing at
23 site shall be in 1:2:4 CC block of size 45x45x60cms. for each leg. including excavation 4.00 2423.74 No
curing etc. complete under the supervision of engineer in charge.(A) Engineer Grade(VR)...
Chevron sign :-Providing and fixing sign boards made out of 1.5mm aluminium sheet / 3mm
ACP (Aluminum composite Panel); size 60x50cm rectangular as per design of IRC-67-2012.
Pre treated with phospheting process & acid etching; coated with one coat of epoxy primer
and two coats of best quality epoxy paint ; reflectorised with High Intensity Prismatic Grade
retro refiectivesheeting of Type-4 as per ASTM D-4956 and latest M.O.S.T.Specifications;
3.3 mtr long stand post of Iron Angle 75 x 75 x 6mm / 65NB Circular MS Pipe as required
and frame fabricated from suitable size iron angle of35x35x3mm; painted with bestquality
epoxy coatings in black and white bends. the details of symbol or inscription / numerals for
each board shall be as per the instruction of engineer in charge. The fixing at site shall be in
24 1:2:4 CC blockof size 45 x 45 x 60Cms. for each leg including excavation, curing 6.00 3711.75 No
etc.complete under the supervision of engineer in charge. A warranty for 7 years for the
Retro reflective sheeting from original manufacturer & a certified copy of 3 year outdoor
exposure test report from third party test lab for the product offered shall be submitted by
contractor. (A) Class-B Type-4 Retro Reflective sheeting
Description of Item (with brief specification and reference to book of specifications) Quantity Rate In figures Unit Amount
MMGSY Project Information Board: Providing and fixing of typical MMGSY Project informatory
sign board with Logo as per 1700 of MORD specifications and drawing. The board will be a
composite unit consisting of Three Plates ACM (Aluminum Composite Material), material
specificaitons as per clause 17001.3. The top most plate will be of 3mm ACM in diamond shape of
600x600mm size, riveted with MS angle iron frame of 25mmx25mmx5mm size on back on edges.
The middle 4mm ACM plate of will be 1200x150mm size riveted with MS angle iron frame of
25mmx25mmx5mm size on back on edges. The main 4mm ACM lower most plate will be
1500mmx600mm size, riveted with MS angle iron frame of 25mmx25mmx5mm size. Riveting of
all the sheets over angle and flat iron frame will be done neatly to have plain surface on one side.
The angle iron frame of lower most plate and flat iron frame of the middle plate will be welded to
two nos. 75mm x75mm (12 SWG) sheet tubes posts placed at 1125mm apart centre to centre. the
top of the middle plate wilt be flushed with the top of 75mm dia medium steel tube posts and these
posts will be embeded in cement concrete M15 grade block of 450x450x600mm below ground
level. The height of the bottom of the lower plate will be 1200mm from normal ground level and the
25 bottom of the middle plate will be 100mm above the top level of the lower most plate. the diamond 1.00 9909.11 No
shaped plate mounted over flat angle iron frame will be connected to middle plate by square steel
section of 47mmx 47mm, thickness 12SWG having a spacing of 100mm between the diamond
shaped plate and middle plate and this square section will be riveted to the bottom point of the
diamond shaped plate. MMGSY logo, letters and numerals on the ACM should be made up of Retro
Reflective sheeting of Type-l AEGP Class-A grade as per the latest MORD section 1700 and fRC 67-
2012 specifications. Al the section of the frame and posts shall be painted with primer and two coats
of epoxy paint. The design, painting and lettering shall be done as per the MMGSY Signage Guide
and as directed by Engineer-In-charge. . A warranty for 5 years for the Retro reflective sheeting for
Class-A respectively, from original manufacturer shall be submitted by contractor
Citizen's information Board- Providing and fixing of typical MMGSY information board as
per instruction. Two ACP sheets of 3 mm thick, of 900 mm x 750mm size fixed at top &
bottom duly rivetted with MS angles of 25 x 25 x 5 mm thick M.S angle shall be welded by
two vertical M.S angle of 5 mm thick to 75 mm x 75 mm of 12 SWG square tubes posts duly
embedded in cement concrete M-15 grade blocks of 600mm x 600mm x 75mm, below
ground level. The letters & figure of any shade reflectorised with High Intensity Prismatic
Grade Retro Reflective Sheeting of Type-4 as per ASTM D- 4956 and latest MORD
specifications; All sections of framed posts and steel tube will be painted with primer and
two coats of epoxy paints as per drawing Clause 1701 and Annexure 1700.1 (10.16). (A)
Class-B High intensity Grade Retro Reflective sheeting.
Road Marking With Hot Applied Thermoplastic Paints with Reflectorising Glass Beads On
Bitumen Surface.Providingcand laying a hot applied thermoplastic compound 2.5 mm. thick
including reflectorising glass beads @250 gms per sqm. Area,Thickness of 2.5 mm is
exclusive of surface applied glass beads as per IRC:35-2015.The finished surface to be level
uniform and free from streaks and holes. Zebra patta/bump patta lane /center line /edge
line/cut patta, The white color marking should provide Iiminanance coefficient on cement
road shall be min. 130 mcd/m2/lux and asphalt road shall be min. 100 mcd/m2/lux during
27 the service life during the day time. The marking should meet the performance criteria for 480.00 367.73 Smt
night time reflectivity, wet reflectivity and skid resistance as mentioned in the section-15 of
IRC 35-2015. Warranty of Reflectorising for Two Years.
Cat Eye / Road Stud / RPM: Supplying Raised Pavement Markers made of polycarbonate
and ABS moulded body and reflective panels with Micro prismatic lens (No Glass bead lens)
capable of providing total internal reflection of the light entering the lens face and shall
support a load of 13635 kgs. tested in accordance to ASTM D 4280 Type H and complying
to Specifications of Category A of MORTH Circular No RW/NH/33023/10-97 Ð DO III Dt
11.06. 1997. The height, width and length shall not exceed 20 mm, 130 mm and 130 mm
and with minimum reflective area of 13 Sqcm on each side and the slope to the base shall be
28 35 +/- 5 degree. The body of the marker should having finger grip for easy and accurate 400.00 217.41 No
placement and application with epoxy / bituminous Adhesive as recommended by the
manufacturer of the marker. The color of the marker should be as per the IRC 35 2015 and
as directed by Engineer-in-charge.
Description of Item (with brief specification and reference to book of specifications) Quantity Rate In figures Unit Amount
Supplying and fixing reinforced concrete heavy duty non pressure pipes with collars for
culverts carrying heavy traffic as per IS 458-1991 specifications including setting the pipes
29 in C.M. 1:2 watering and laying (to level or slopes) of class NP3 of following internal 30.00 660.00 Rmt
daimeters.(v) 300mm dia.
Total Tender amount
Rupees One Crore Fourty Four Lakh(s) Sixty Thousand Six Hundred Thirty Three And Paise Sixty Two Only
I/am we/are willing to carry out the work at _____% above /below _____________ percent (should be written in figures and words) of the estimated rates
mentioned above. Amount of my/our tender works out as under.
* Estimated amount put to tender
Deduct :_____ % Below Rs.________________
Net Rs. ______________________
In words ___________________________
1. The Contractor Shall Exhibit a board with deatiled specification and details of work as directed by the Engineer-In-Charge for which no Extra
Payment shall be made.
2. The labour crss will be deducted as per prevaling Rules i.e 1% of the work done.
3. GST and Income tax TDS will be deducted at a Source while making Payments of bills.
4. In all RCC items in Rate Analysis Standard cement Consuption has been taken as per Govt.G.R: PRC -10/2017 cement consumption/16/c,
Date: 11/05/2017 as stated i. S.O.R therefore in RCC Items where there is a changed as per actual mix design the cost of diffrence of cement
consumption have been deduvted from the rate of orignal item at the rate of input rate mentioned in all the tender.
Signature of Contractor
Deputy Executive Engineer Executive Engineer
Bandhkam (Pan) Sub Division R & B (Pan) Division
Bayad Modasa
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
008.BOQ-pkg-Constg. Tenpur to Bhudasan.pdf
009.POL-Pkg-Constg. Tenpur to Bhudasan.pdf
002.specification pkg-Constg. Tenpur to Bhudasan.pdf
001.SBD Book-Pkg-Constg. Tenpur to Bhudasan.pdf
010.Test Schedule Pkg-Constg. Tenpur to Bhudasan.pdf
007. ESMP Table and Protection Clause.pdf
006. Clauses-Terms And Conditions of Contract-B1-04.09.2017 (1).pdf
004. SOM and Monitoring Formats (Uploading attachment).pdf
005.Letter Special Condition Contract.pdf
003.SBD GR All Pdf-1-58.pdf
003.SBD GR All Pdf-59-111.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .