SETTING UP OF BOAT SHED STORE ROOM POL ROOM AND CHANGING ROOM AT INA EZHIMALA

Amount

Total amount of Sch 'A' part-I ( Buildings/Structures)

Total amount of Sch 'A' part-II (Excavation, earthwork,Site clearance & Develoment)

Total amount of Sch 'A' part-III (Internal Electrification)

Total amount of Sch 'A' part-IV (Internal water Supply)

Total amount of Sch 'A' part-V( External Electric Supply)

Total amount of Sch 'A' part-VI ( Road)

Total amount of Sch 'A' part-VII (Area Drainage)

Total amount of Sch 'A' part-VIII (Sewage Disposal)

Total amount of Sch 'A' part-IX (Boulder Pitching /Retaining wall (RCC & RR masonry))

Total amount of Sch 'A' part- X (Lightening Protection)

SCH. 'A' PART -XI (MISCELLANEOUS) Note :- This schedule is not pre priced by MES and the pre priced rate indicated as "Rs. 0.00" under Col.5 signifies this fact only.

INTERNAL ELECTRIFICATION :- Point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits), with multi-stranded copper conductor 1.5 Sq. mm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLS cable 1100 volts grade, ISI-694 marked with valid CML No. with and including heavy duty non metalic regid PVC concealed conduit and conduit accessories concealed in wall/roof/floor etc, ISI marked with valid CML No.(IS-9537-1983 for conduits and IS:3419:1976 for conduit accessories), with galvanised modular mild steel/pressed steel sunken boxes (with earth dolly) duly electroplated, covered with modular frame and base plate for fixing of modular switches, sockets and fan regulators etc, including on run of PVC insulated multi-stranded copper conductor 1.5 Sqmm nominal cross sectional area single core F.R.L.S. cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed at site for the following:- (NOTE: (i) Switches, sockets, regulators to be measured and paid for separately.

(a) All as per item No. 12 but for One light point controlled by one 5/6 amps one way switch complete all as specified and directed.

(b) All as per item No. 12 but for One ceiling fan point controlled by one 5/6 amps one way switch and one fan regulator complete all as specified and directed.

(c) All as per item No. 12 but for One exhaust fan point/Air circulators point controlled by one 5/6 amps one way switch complete all as specified and directed.

(e) All as per item No. 12 but for One Socket outlet, three/five pin, 5 Amp, independent controlled by by one 5/6 amps one way switch or switch/socket combination 5 amps, 5 pin etc complete all as specified and directed.

(f) All as per item No. 12 but for one light point conrolled by 2 Nos, 2 way switches 5/6 Amps complete all as specified and directed.

Point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits), with multi-stranded copper conductor 2.5 Sq. mm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLS cable 1100 volts grade, ISI-694 marked with valid CML No. with and including heavy duty non metalic regid PVC concealed conduit and conduit accessories concealed in wall/roof/floor etc, ISI marked with valid CML No.(IS-9537-1983 for conduits and IS:3419:1976 for conduit accessories), with galvanised modular mild steel/pressed steel sunken boxes (with earth dolly) duly electroplated, covered with modular frame and base plate for fixing of modular switches and sockets etc, including on run of PVC insulated multi-stranded copper conductor 2.5 Sq mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed at site for the one 3/5 pin 15/16 amps socket outlet independent board:- (NOTE: Switch and socket to be measured and paid for separately)

Modular switch one way 6 A, 1 module 230 volts 50 Hz ISI Marked complete all as specified and directed.

Modular switch two way 6 A, 1 module 230 volts 50 Hz ISI Marked complete all as specified and directed.

Modular switch one way 16 A, 1 module 230 volts 50 Hz ISI Marked complete all as specified and directed.

Socket modular 6A, 2/3 pin combined, 2 module, AC, 230V, ISI Marked complete all as specified and directed.

Socket modular 16A, 2/3 pin combined, 2 module, AC, 230V, ISI Marked complete all as specified and directed.

Step type in 5 stages fan speed regulator 2 module 230 volts 50 Hz ISI Marked complete all as specified and directed.

Ceiling fan, Copper wound, service value not less than 4.5 as per IS 374-2019, 5 star rated complete with down rod, canopy, mounting clamp etc. AC, 230V, 1200mm Sweep with out regulator including 1.50 Sqmm 3 core flexible Copper cable from fan connector to ceiling rose all as directed. Note:-Ceiling fan shall be fixed with suitable length of down rod as per site requirement to maintain standard height and rate shall deemed to be included in the rate quiote.

Exhaust fan 250 mm sweep 230 Volts AC 50 Hz PVC body with copper wound having Energy Efficient model including all as directed complete all as specified and directed. Make :- Crompton ( Model Brisk Air) or equivalent in Usha/ khaitan.

Exhaust fan 450 mm sweep 230 Volts AC 50 Hz metal body with copper wound having Energy Efficient model two Nos ball bearing heavy duty, IP-55, 1400 RPM complete all as specified and directed at site.Make Crompton Model No EXHD450-4-1 or equivalent make mentioned in the list of manufacturers.

Air circulator 600 mm sweep single phase, 230 Volts AC 50 Hz metal body with copper wound having Energy Efficient model 1400 RPM, 16000CFM complete complete all as specified and directed. Make Crompton Model No ACVORTEX24WM ISI marked or equivalent make from list of manufacturers

LED Tube light 1X20 Watt 4' universal battern type with and including connecting 3 core 1sqmm PVC insulated multistranded copper conductor's sleeve color matching to fitting and connecting up complete all as specified and directed at site of Make/Model:- (a) Fitting: Crompton Cat Part No DIJB12LT8 ECO (b) Lamp: Crompton Cat Part No LT8-20-865-(2) ULTRON or equivalent make from list of manufacturers

LED light 1X10 Watt 2' with and including connecting 3 core 1.0 Sqmm PVC insulated multistranded copper conductor color of sleeve matching to fitting and connecting up complete all as specified and directed at site of Make/Model:- (a) Fitting: Crompton Cat Part No DMLN1LT8-8 UNILITE (b) Lamp: Crompton Cat Part No LT8-8-865-2 ULTRON or equivalent make from list of manufacturers

LED surface mounted light 1 x12 Watt fitting including 3 core 1.0 sqmm PVC insulated multistranded copper colour of sleeve matching to fitting and connecting up o fitting with Lamp : Cromption Cat Part No. LCDSPL-R-12-CDL or equivalent manufacturers from list of manufacturers.

Building security light 25 watt new generation energy saving and environmental friendly long life LED streetlight made of pressure die cast alluminium housing with hogh power LED as lighting source and lens embded PC cover having TOP OPENING seperade driver compartment with IP66 protection and impact resistance of IK 07 complete with and including lamp, wall mounted bracket fabricated out of 40mm GI pipe light grade bend to shape1.5 mtr long and two nos wall mounting clamps using 25x4mm thick MS strip bend to shape and welded with pipe to form solid structure and one run of 1.0 sqmm PVC insulated multistranded copper cunductor wire conecting pvc terminal to fitting complete. (Make Crompton Model No LSTS-25-CDL-M ASTRA NEO) or equivalent in Philips/Wipro.

MCCB DB VTPN 4 way with metal double door 415 Volts with provision for MCCB as incomer and SP/TP MCBs as out going with IP 43 protection, door earthing, isolated neutral bar, mechanical impact strength 1K 09 including cement spill protector. Make Legrand Cat No 507745 or equivalent manufacturers from list of manufacturers.

MCCB 4 pole of current rating capacity 40 Amps with breaking capacity Icu AC 16 kA @ 415V AC 50 Hz conforming to IS/IEC 60947-2 & EN 60947-2 of thermal magnetic release with ON-TRIP-OFF indication. Make Legrand Cat No 420012 or equivalent manufacturers from list of manufacturers.

Sheet metal enclosure distribution board MCB DB SPN 8 way with metal double door 240 Volts with IP-43 protection including door earthing complete all as specified.Make Legrand Cat No 507611 or equivalent manufacturers from list of manufacturers.

Sheet metal enclosure distribution board MCB DB SPN 4 way with metal double door 240 Volts with IP-43 protection including door earthing complete all as specified.Make Legrand Cat No 507610 or equivalent manufacturers from list of manufacturers.

MCB SPN 10-32 Amps 10 kA with characteristic "B/C" curve. Make Legrand Cat No 408609 to 408617 or equivalent manufacturers from list of manufacturers.

RCBO 32 Amps DP, 240V, AC type 30mA. Make Legrand Cat No 411395 or equivalent manufacturers from list of manufacturers.

MCB SP 06-32 Amps 10 kA with charaterestic "C" Curve conforming to IS/IEC 60898. Make Legrand Cat No 408587or 408595 equivalent manufacturers from list of manufacturers

Submain wiring with 2 runs of 2.5 Sqmm PVC insulated unsheathed copper conductor multistranded FRLS cable drawn in and including PVC conduit and its accessories laid in concealed in wall/roof/floor etc including one run of 2.5 Sqmm multi stranded copper conductor cable for earth continuity wire complete all as specified and as directed. (Note: Three runs of 2.5 sqmm wire and one run of PVC concealed conduit shall be measured as one run only

Submain wiring with 2 runs of 6 Sqmm PVC insulated unsheathed copper conductor multistranded FRLS cable drawn in and including heavy duty PVC conduit and its accessories laid in concealed in wall/roof/floor etc including one run of 6 Sqmm multi stranded copper conductor cable as earth continuity wire complete all as specified and as directed. (Note: Three runs of 6 sqmm wire and one run of PVC concealed conduit shall be measured as one run only

INTERNAL WATER SUPPLY:- Stop cock angular brass, chromium plated 15/20mm bore with wall flange complete of make Jaguar Cat part No CQT-23059 or equivalent manufacturers from list of manufacturers.

Bib cock, brass, chromium plated 15mm bore with wall flange complete of make Jaguar Cat part No CQT-23047 or equivalent manufacturers from list of manufacturers

Pillar cock. brass, chromium plated 15mm bore with wall flange complete of make Jaguar Cat part No CQT-23021B or equivalent manufacturers from list of manufacturers

Health faucet (Hand shower) with 1M long easy flexible tube in crome finish with hook and NRV (Black flow preventer) complete. Make Jaguar cat part No ALD579 or equivalent in Parryware Roca / Hindware.

Over head shower rose 100mm dia round shape single flow ABS body chrome plated wirh grey face plate and Rubi/ cleaning system alongwith shower arm casted120mmlongheavy body round shape for wall mounted shower with wall flange complete of make Jaguar cat part No OHS1989 and SHA-487 or equivalent manufacturers from list of manufacturers

Stop cock long body brass, chromium plated combination of exposed part kit of consealed stop cock with fitting sleave, operating knob, adjustable wall flange and regular body concealed stop cock suitable for 15mm pipe line with protection cap of make Jaguar cat part No CQT-23082K and ALD083 or equivalent make mentioned from list of manufacturers

EXTERNAL ELECTRIC SUPPLY:- Riddeled soil as earth cushioning to UG cable by using IS sieve to separate the composite particle/ roots etc and refilling/ spread in all trenches as cushioning and rammed down to form a solid bed all as specified and as directed.

Supply, lay and testing cable XLPE insulated, screened PVC bedded, galvanized steel strip or wire armoured electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 2 core 6 sqmm. (street lights) all as specified and as directed.

Supply, lay and testing cable XLPE insulated, screened PVC bedded, galvanized steel strip or wire armoured electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 4 core 10 sqmm. (street lights) all as specified and as directed.

Supply, lay and testing cable XLPE insulated, screened PVC bedded, galvanized steel strip or wire armoured electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 3.5 core 50 sqmm. all as specified and as directed.

Supply test and commissioning of out door floor mounting type LT panel board made out of thermo plastic poly carbonate suitable for 415V 3 phase 4 wire 50Hz non metallic kiosk with provision for switch gear and control gear enclosedin amodular/combinable panel enclosure with IP 65 protection (Main Panel) Incoming MCCB FP 63 A, 415V, 50Hz with breaking capacity 25KA, O/C and E/F protection-01 No Bus Bar TP & N 200 Amps, Aluminium bus bar E 91 grade, 1100V, grade duly covered with heat shrinkable, sleeves colour coded duly fixed on moduled brackets - 01 set. Outgoing MCB 40A 4P,415V, 50Hz with breaking capacity 16KA, O/C and E/F protection -02 No (01-4 way VTPN DB, 01- spare). MCB 16A SPN, 250V, 50Hz with breaking capacity 10KA, O/C and E/F protection - 01 No (Change Room). MCB SPN 10A, 10KA -02 No (01 street light 01- spare) Timer switches 250V single phase 20 A 01 No

Steel tubular swaged poles Type 410SP-22 (8.5 meter long) with CI base plate and finial tapper plug, bolts, nuts and washers and single swan neck, including 3 coat of bitumen paint internally complete and externally for the portion embedded in concrete and two coats of aluminium paint over a coat of red oxide primer to the balance portion of external surface and all as specified and directed. Note : Excavation and PCC shall be measured and paid seperately under relevent item of schedule "A" foundation and coping.

45/46W LED street light made up of pressure die cast housing with toughened glass and high power LEDs with option of secondary optic with IP 65 protection including to fix on single swan neck type pole with suitable fasteners etc complete all as specified and directed. Make : Crompton Model No. NEXUS + LSTP-45-CDL or equivalent make from list of manufacturers

Modification of existing LT panel by providing of MCCB, FP 63A, 25 kA, 415V with sheet metal enclosure made of 3mm CRCA sheet with angle iron frame 50x50x6mm suitable height and foundation etc complete at sub station all as specified and directed. Note:- (i) The quoted rate shall be include fixing materials, busbar/aluminium cable of suitable size etc. (ii) The quoted rate shall be include necessary earth work and PCC work for fixing of proposed modification of LT panel.

Junction box made out of polycarbonate for loop in /out with all fixing arrangement on pole with one MCB SP 6A for LED light including 10M 1.5 Sqmm 2 core flexible cables all as specified and directed CAT No.KF 0600B or or equivalent manufacturers from list of manufacturers

EXTERNAL WATER SUPPLY:- Automatic air release valve 50 mm dia suitable for domestic water with 50 mm gun metal stop valve complete all as specified and directed.

Cutting existing CPVC pipe 100 mm dia for alternations or additions including by providing 100x100xx80 mm CPVC reducer Tee, Bends, Tapers, FTA (Brass threaded) suitable for connecting CPVC 80mm dia pipe line of surface all as specified.

PVC ball valve (butterfly valve)100 mm dia (4") complete all as specified and as directed. (Make: Supreme, aqua gold fitting sch 80 PVC ball valve (plastic) or equivalent make from list of manufacturers

Cast iron sluice valve, 80 mm dia (class PN 1.6) double flanged type with grey cast iron body, stainless steel stem, rubber gasket, gland packing etc complete complying to relevent IS requirement (IS-1536-1976) complete all as specified and as directed.

Provision of masonry valve chamber of 0.9 x 0.9 x 0.9M internal size including 100 mm thick PCC 1:5:10 (type E2) foundation, brick work in CM 1:6 plastering internal sufaces completely and external surfaces upto 150 mm belowground level, 15 mm thick in CM 1:4100mm thick 1:3:6 (type C-1) coping 80x50x6 mm angle iron, 6 mm thick MS plate cover complete with 'handle' locking arrangement including painting steel and iron surfaces with two coats of synthetic enamel paint of tint as directed over a coat red oxide complete all as shown on drawing No CE DD /TD/119 sheet1 / 1 Note: The quoted rate inclusive of MS cover and locking arrrangements as per the drawings.

CPVC pipe, 50mm inner dia SDR 11 and plain CPVC SDR 11 fittings fixed on walls / laying on floor and making good the disturbed surface complete all as specified and directed.

CPVC pipe, 80mm inner dia SDR 11 and plain CPVC SDR 80 fittings fixed on walls / laying on floor and making good the disturbed surface complete all as specified and directed

Repairs to existing boat washing station of size 17x7m with 100mm thick PCC 1:2:4 (type B1) using 20mm graded stone aggregate finished even and smooth with using extra cement over brushing neat cement slurry @ 3 Kg/sqm after roughening of existing surface as shown on schedule of finishes of drawing and all as specified and as directed.

Rectangular LED Highbay 135W with excellent heat shrink along with IP 66 protection including mounting accesseries complete. Make Crompton Cat No. LHB-135-CDL/60 or equivalent make mentioned from list of manufacturers all as specified and as directed.

Modern Engineering Co

K P DIVAKARAN

LUCKY ENTERPRISES

CREATIVE BUILDERS

A2Z ENGINEERS AND PILE FOUNDATIONS