CPPP

Cancelled

Works

Electrical Works

Provisioning of Ten New Split ACs for JSB-I at DRDL Project Cell INS Kalinga.

Defence Research and Development Organisation

Visakhapatnam. | Visakhapatanam, Andhra Pradesh

Amount: ₹6.4 LCloses: 18 May 2026Closed

Timeline

Published28 Apr 2026
Closed18 May 2026
Cancelled8 Jun 2026

Corrigenda

Corrigendum

1 updatesLatest on 19 May 2026Submission Ends:18 May 202626 May 2026

Date changes

Download Ends18 May 202626 May 2026Submission Ends18 May 202626 May 2026Bid Opening19 May 202628 May 2026

Cancellation Details

Cancellation of Tender

Corrigendum - II.Cancellation of Tender.Reason: Due to admistrative reasons/issuesDocument: cancelled_1.pdf

Published 8 Jun 2026

Tender Value

₹6.4 L

EMD Value

₹12,830

Closing Date

18 May 2026, 2:00 pmClosed

Tender Inviting Organisation

Name

Estate Manager

Address

O/o EMU (R and D), DRDO Complex, Near Airport, Jagdalpur - 494001.

Work Description

Provisioning of Ten New Split ACs for JSB-I at DRDL Project Cell INS Kalinga.

Tender Information

Tender ID

2026_DRDO_906767_1

Reference Number

EMU/JPR/ENQ/MISC/02/2026-27

Tender Type

Open Tender

Product Category

Electrical Works

Form of Contract

Item Rate

Period of Work

180 days

Location

Visakhapatnam.

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer tender documents.

Documents Required

6 documents required · 6 mandatory

Fee/PreQual/Technical

RequiredScanned copy of original EMD. (.pdf)

RequiredScanned copy of Tender Enquiry duly signed with seal along with its Annexures - I. (.pdf)

RequiredScanned copy of Details of Similar Works (Annexure - IV). (.pdf)

RequiredScanned copy of Performance Certificate (Annexure - V). (.pdf)

RequiredScanned copy of Undertaking (Annexure - III). (.pdf)

Finance

RequiredPrice Bid/Commercial Bid. (.xls)

Fee & Financial Details

Tender Fee Amount

₹0

EMD Fee Amount

₹12,830

Important Dates

Last Activity

8 Jun 2026

Published

28 Apr 2026

Bid Opening

19 May 2026

Download Starts

28 Apr 2026

Download Ends

18 May 2026

Submission Starts

28 Apr 2026

Bill of Quantities

Item RateBoQ_Ver4.0INR

BoQ1 (7 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Supplying , Installation, Testing and Commissioning of Air Cooled Hi Wall split type Air conditioners complete with Indoor unit(IDU), Out door unit (ODU), surface / concealed copper Refrigerant piping with insulation (closed cell elastomeric nitrile rubber tubular pipe section) upto 3 Mtr (IDU to ODU), copper power cable upto 3.5 Mtr (IDU to ODU) i/c drain pipe R-32/R-410/ R-407 Green Refrigerant, wireless Remote control, suitable for working between 180- 260V with low & high voltage cutoff and 50 hz ,1 phase AC supply capable of performing cooling, dehumidification, air circulation of following capacity with Scroll / rotary compressor. The system shall be able to deliver 100% of the rated capacity upto 42 0C. Min 5 year Original Equipment Manufacturer (OEM) warranty both compressor and Printed Circuit Board (PCB). Must comply : Electrical cable IS 694 or IS 9968 temperature sensing control IS /International Electrotechnical Commission (IEC) 60730, hermetic compressor IS 10617, heat exchanger IS 11329, capacitor IS 2993 and motor IS 12615. Complete as per CPWD specification and IS : 1391 Part II 2023. The system shall be able to operate up to 50 0C (out door ambient temperature) Make:- Voltas/BlueStar/Daikin.
1.01	1.5 TR with 5 Star BEE Rating.	10	Each	-	-
2Supplying, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-O tubular insulation/with Class-O closed cell elastometric nitrile rubber tubular sleeves sections of 19 mm thick insulation as given below for Suction and Liquid lines, all accessories as per specifications etc. as required :
2.01	i) 12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm.	15	Mtrs	-	-
2.02	ii) 19 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm.	10	Mtrs	-	-
3	Cutting holes up to 30x30 cm in walls including making good the same: With common burnt clay F.P.S. (non modular) bricks.	10	each	-	-
4Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.
4.01	i) 2 X 4 sq. mm + 1 X 4 sq. mm earth wire.	400	Meter	-	-
5	Supplying & fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required.	10	Each	-	-
6	Supply and installation of 3 KVA capacity voltage stabilizers operating voltage range 90-300 volt moden no-VEW 500 Plus with digital meter including mounting arrangement etc. Make: V-Guard/voltas/microtex.	10	Each	-	-

Stage Documents

Stage Summary Snapshot

stage.html

html • 0.02 MB

Cancellation Documents

cancelled_1.pdf

pdf • 0.55 MB

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.04 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.53 MB

Work Item Documents

Enquiry02.pdf

Tender Documents • 0.23 MB

GCC_2023.pdf

Tender Documents • 1.16 MB

ANNEXURE-IIIUndertaking.pdf

Tender Documents • 0.37 MB

ANNEXURE-IVSimilarWorks.pdf

Tender Documents • 0.19 MB

ANNEXURE-VCompletionPerformance.pdf

Tender Documents • 0.09 MB

ANNEXURE-VIBG_FORMAT.pdf

Tender Documents • 0.27 MB

ANNEXURE-VIIAGREEMENT_FORMAT.pdf

Tender Documents • 0.18 MB

BOQ_953094.xls

BOQ • 0.27 MB

ApprovedMakesII.pdf

Tender Documents • 0.17 MB

Corrigendum Documents

date_ext.pdf

PDF • 0.62 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Supplying , Installation, Testing and Commissioning of Air Cooled Hi Wall split type Air conditioners complete with Indoor unit(IDU), Out door unit (ODU), surface / concealed copper Refrigerant piping with insulation (closed cell elastomeric nitrile rubber tubular pipe section) upto 3 Mtr (IDU to ODU), copper power cable upto 3.5 Mtr (IDU to ODU) i/c drain pipe R-32/R-410/ R-407 Green Refrigerant, wireless Remote control, suitable for working between 180- 260V with low & high voltage cutoff and 50 hz ,1 phase AC supply capable of performing cooling, dehumidification, air circulation of following capacity with Scroll / rotary compressor. The system shall be able to deliver 100% of the rated capacity upto 42 0C. Min 5 year Original Equipment Manufacturer (OEM) warranty both compressor and Printed Circuit Board (PCB). Must comply : Electrical cable IS 694 or IS 9968 temperature sensing control IS /International Electrotechnical Commission (IEC) 60730, hermetic compressor IS 10617, heat exchanger IS 11329, capacitor IS 2993 and motor IS 12615. Complete as per CPWD specification and IS : 1391 Part II 2023. The system shall be able to operate up to 50 0C (out door ambient temperature) Make:- Voltas/BlueStar/Daikin.
1.01	1.5 TR with 5 Star BEE Rating.	10	Each	-	-
2Supplying, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-O tubular insulation/with Class-O closed cell elastometric nitrile rubber tubular sleeves sections of 19 mm thick insulation as given below for Suction and Liquid lines, all accessories as per specifications etc. as required :
2.01	i) 12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm.	15	Mtrs	-	-
2.02	ii) 19 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm.	10	Mtrs	-	-
3	Cutting holes up to 30x30 cm in walls including making good the same: With common burnt clay F.P.S. (non modular) bricks.	10	each	-	-
4Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.
4.01	i) 2 X 4 sq. mm + 1 X 4 sq. mm earth wire.	400	Meter	-	-
5	Supplying & fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required.	10	Each	-	-
6	Supply and installation of 3 KVA capacity voltage stabilizers operating voltage range 90-300 volt moden no-VEW 500 Plus with digital meter including mounting arrangement etc. Make: V-Guard/voltas/microtex.	10	Each	-	-

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1Supplying , Installation, Testing and Commissioning of Air Cooled Hi Wall split type Air conditioners complete with Indoor unit(IDU), Out door unit (ODU), surface / concealed copper Refrigerant piping with insulation (closed cell elastomeric nitrile rubber tubular pipe section) upto 3 Mtr (IDU to ODU), copper power cable upto 3.5 Mtr (IDU to ODU) i/c drain pipe R-32/R-410/ R-407 Green Refrigerant, wireless Remote control, suitable for working between 180- 260V with low & high voltage cutoff and 50 hz ,1 phase AC supply capable of performing cooling, dehumidification, air circulation of following capacity with Scroll / rotary compressor. The system shall be able to deliver 100% of the rated capacity upto 42 0C. Min 5 year Original Equipment Manufacturer (OEM) warranty both compressor and Printed Circuit Board (PCB). Must comply : Electrical cable IS 694 or IS 9968 temperature sensing control IS /International Electrotechnical Commission (IEC) 60730, hermetic compressor IS 10617, heat exchanger IS 11329, capacitor IS 2993 and motor IS 12615. Complete as per CPWD specification and IS : 1391 Part II 2023. The system shall be able to operate up to 50 0C (out door ambient temperature) Make:- Voltas/BlueStar/Daikin.

1.01

1.5 TR with 5 Star BEE Rating.

Each

2Supplying, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-O tubular insulation/with Class-O closed cell elastometric nitrile rubber tubular sleeves sections of 19 mm thick insulation as given below for Suction and Liquid lines, all accessories as per specifications etc. as required :

2.01

i) 12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm.

Mtrs

2.02

ii) 19 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm.

Mtrs

Cutting holes up to 30x30 cm in walls including making good the same: With common burnt clay F.P.S. (non modular) bricks.

each

4Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

4.01

i) 2 X 4 sq. mm + 1 X 4 sq. mm earth wire.

400

Meter

Supplying & fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required.

Each

Supply and installation of 3 KVA capacity voltage stabilizers operating voltage range 90-300 volt moden no-VEW 500 Plus with digital meter including mounting arrangement etc. Make: V-Guard/voltas/microtex.

Each