SPECIAL REPAIRS TO OTM ACCN IN BLDG NO P 02 AND P 68 AT SUKNA MIL STN UNDER GE SUKNA

Amount

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.

M&L for 5mm thick solid coloured PVC sheet (min density 600 Kg/Cum) wall panelling, panels stuck on & including framework made out of 5mm thick & 50 mm wide PVC strips (min density 600 Kg/Cum) fixed to wall vertically at 250mm centre to centre & horizontally at 600mm centre to centre. PVC strips shall have 6mm wide and 1mm deep grooves in their centre for sinking the head of the screw & shall be fixed to wall using 65mm long MS screws & PVC fasteners at a max distance of 200mm. PVC sheet panel shall be fixed to PVC strip framework using solvent cement & Jointing of two PVC sheet panel shall only be done above PVC strip. Minimum size of one PVC sheet panel shall be 1220 (L) x 2440 (H) mm, however in case of complete height of wall panelling is more than 2440mm, PVC sheet panel of 1220 mm length and balance height shall be fixed above lower panels complete all as specified and directed

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification.

S&F of 10 mm thickness of PVC insulation panel with EPS stuck to 1mm printed PVC sheet suitably placed in false ceiling including GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to entre / intermediate channel 0.9mm thick having equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel at 457mm centre to centre complete all as specified and directed.

S&F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), including disposing off the retrieved debris outside the premises, complete all as specified and as directed.

M & L for light shade vitrified Ceramic tiles 8 to 10 mm thick (square/ rectangular) of approved size, area of each tile 0.42 Sqm exceeding but not exceeding 1.00sqm, in floors etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigments to match with the shade of tiles, over and including 20mm thick screed bed in CM (1:6), complete all as specified and as directed.

M & L for light shade vitrified Ceramic tiles 8 to 10 mm thick (square/ rectangular) of approved size, area of each tile 0.42 Sqm exceeding but not exceeding 1.00sqm, in skirting/vertical surfaces etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigments to match with the shade of tiles, over and including 10mm thick screed bed in CM (1:4), complete all as specified and as directed.

M&L for coloured Glazed ceramic tiles of size 300mmx 450mm , 6 to 7 mm thick on the vertical surfaces such as in skirting / dado etc, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match with the shade of the tiles, over and including 10mm thick cement mortar backing coat in CM (1:3), complete all as specified and and as directed.

Taking down cement plaster on brick wall etc incl racking out joints hacking for key scrubbing down with water etc. complete all as spd & directed.

M&L for Dubbing out in cement plaster (1:4) of average 10mm thick on irregular face of walls/chajjas on any height complete all as specified & directed by Engineer-in-charge

M&L for rendering 15 mm thick in CM (1:4) on brick work or concrete surfaces finished even and smooth (without using extra cement) mixed with water proofing compound as per manufacturer instructions, complete all as specified and as directed.

M&L for rendering 15 mm thick in cement mortar (1:6), on brick work or concrete surfaces, finished even and smooth without using extra cement, complete all as specified and directed.

M&L for rendering 5mm thick in CM (1:3) on concrete surfaces of ceiling/Chajja/Facia of chajja etc, finished even and smooth without using extra cement, complete all as specified and as directed.

Prepration of new wall surfaces, applying two coats of acrylic emulsion exterior paint over a coat of primer all as specified and directed

M&L for preparing new Plasterd surfaces of walls applying 3mm wall care Putty and there after applying two coats of oil bound distemper, white or any tint as approved, over and including a coat of primer, complete all as specified and directed.

M&L for preparation of new plastered surfaces of ceiling and applying three coat of white washing, complete all as specified and directed .

M&L for complete removal of existing treatement of internal wall and appying two coat of oil bound distemper over a coat of alkali resistant priming paint etc complete all as specified and as directed

M&L preparation of old wall surface and apply Two coats of acrylic emulsion exterior paint (Apex paint) over one coat of primer complete all as specified and directed. Note : Rate shall be included for necessary scaffolding and safety arrangement.

M & L for roof treatment alongwith removal of old treatmentincluding the following :- (i) Roughening surface of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. (ii) M & L for 40 mm thick Cement concrete type B-0, (1:2:4) (12.5 mm graded aggregate) as in roof padding incl WPC. (iii) Screed bed or bedding layer or mortar 15mm layer of cement mortar 1:4 thick for laying floor finishes to be finished even and smooth (without using extra lime or cement) incl WPC . (iv) Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq. m including cleaning surfaces. (v) APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyester non woven fabric laid on primed surface by forced application complete all as specified.

Dismantling Asbestos cement (corrugated, semi corrugated ,etc) sheets in roof covering any description, fixed in any position complete all as specified.

S&F pre-painted colored trapezoidal profiled Galvalume/Zincalume sheet with min 0.50mm TCT confirming to IS-513 (AZ-150 GSM, AL Zn alloy metalic coating, 550 MPA yield stress as per AS-1397), colour /exterior coat of silicon modified polyster/ BHP X RW paint system 20 micron top coat applied over 5 micron primer and a 5 micron polyster back coat applied over 5 micron primer, as in roof covering/ cladding to wall, fixed with and including Galvanised self drilling self-tapping fastener (12-14 x 55 with EPDM seals), complete all as specified and directed.

S&F pre-painted colored plain sheet profiled Galvalume/Zincalume sheet with min 0.50mm TCT confirming to IS-513 (AZ-150 GSM, AL Zn alloy metalic coating, 550 MPA yield stress as per AS-1397), colour /exterior coat of silicon modified polyster/ BHP X RW paint system 20 micron top coat applied over 5 micron primer and a 5 micron polyster back coat applied over 5 micron primer,as in roof covering/ cladding to wall fixed with and including Galvanised self drilling self-tapping fastener (12-14 x 55 with EPDM seals), complete all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc, complete all as specified and as directed.

S&F steel work in tubular trusses, purlins, rafters, Fan Hook & similar work including special shaped washers etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240, also including necessary welding etc complete all as specified and as directed.

Demolition of cement concrete (un-reinforced ) of any description and in any position not otherwise specifically provided for including disposing off the retrieved debris outside the premises, complete all as specified and as directed.

M&L for providing 75mm thick PCC (1:3:6) type C2 (using 40mm graded crushed stone aggregate), as in plinth protection, surface finished even & smooth without using extra cement including provision of 10 mm joints (at an interval of 3 metre and turnings) duly filled with fine sand and bitumen in the ratio of (3:1), complete all as specified and directed.

M&L for 18 to 20mm th granite slab ( as in table top rubbed and polished) as in counter basin fixed in CM (1:4) , pointing in white cement (1:2) using granite dust with admixture of pigment to match complete including dismantling the existing slab all as directed.

Demolition of brickwork built in cement mortar including all quioins,arches,pillars etc complete all as specified and as directed by the Engr-in-charge.

M&L for Brickwork with fly as Bricks(old size), straight or curved on plan exc 6m mean radius built in Cement morter (1:6), complete all as specified and directed

M&L for brick work with fly ash Bricks(old size), straight or curved on plan to any radius built in CM (1:4) as in half brick thick walls, complete all as specified and as directed.

Taking down chowkats or frames exc 1.50 Sqm but n.exc 4.0 Sqm each with shutters (without taking off shutter from the frames) complete all as specified and directed.

Taking down chowkats or frames n.exc 1.5 Sqm each with shutters (without taking off shutter from the frames) complete all as specified and directed.

S & F Solid PVC door/window frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube, as per specifications given in SSR 2020 (Part-II) complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of wire gauze in lieu of plain colour PVC sheet. The wire gauze shall be wrapped on an additional square 8mm MS Solid tube and this tube shall be welded to MS tubes. The wire gauge shall be stretched to tighten firmly, suppling & fixing in the frame at site as per specification & drawing

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge.

S&F framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks, wire clothes and similar work conforming to Fe-290 Gde-165, complete all as specified and as directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads

M & L for 4.8mm thick glass incl tinted/dark film exc 0.5 sqm each pane complete fixed to aluminium frame work incl rubber beading complete all as specified and directed by the Eng-in-charge

M & L for 4.8mm thick glass incl tinted/dark film n exc 0.5 sqm each pane complete fixed to aluminium frame work incl rubber beading complete all as specified and directed by the Eng-in-charge

S & F 4 mm thick sheet glass, ordinary quality and glazing with oil putty in squares n.exc 0.50 Sqm in each part. complete all as specified and as directed.

S&F 150mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed.

S&F 150mm long extruded aluminium anodised alloy handles, fabricated type complete all as specified and as directed.

S&F 300 mm long aluminium , alloy , anodised , sliding door bolt with hasp, staple (bolt type ) and fixing clips of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as directed.

S&F 150mm floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as directed

S&F rotational moulded polyethylene water storage tank 1000ltrs capacity, ISI marked, (cylindrical vertical type triple layered) with closed top including inlet,outlet and wash out holes, provision of G.I Fittings for fixing of the inlet, outlet and washout pipes, hoisted in position, including float valve,complete including dismantling Old one all as specified and as directed.

S&F in repair 20mm gun metal globe or gate wall with iron wheel head screwd both end for iron pipe and etc complete all a speified

S&F Door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000mm in width of aluminium (Die cast) body all as directed by Engr-in-Charge.

S&F soap dish,brass cromium plated fixed with plugs with chromium plated brass screws, complete all as specified and as directed

S&F toilet paper holder cromium plated fixed with plugs with chromium plated brass screws, complete all as specified and as directed.

S&F in repair PVC valveless double syphonic action type flushing cistern low level of 10 Ltr capacity white with inlet ball valve, float, flushing bend & handle including brackets, suitable for both Indian Type Water Closet & Europeon Type Water Closet including brackets & connection to pipe etc complete all as specified and as directed

S&F in repairs bib tap, fancy type, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule of 15 mm bore, complete all as specified and as directed.

S&F 15mm bore Pillar taps fancy type, cast copper alloy, with long swan neck , chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed all as specified and as directed

S&F in repairs stop valves, fancy type, cast copper alloy, chromium plated with long shank and cup (concealed type), screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15 mm bore, complete all as specified and as directed.

S&F in repairs Health faucet (ABS Body) mild steel CP suitable for 15mm dia pipe with 1.25m long flexible tube and ABS wall hook incl making connection and fixed in position complete all as specified

S&F 15mm bore medium grade, galvanized steel tubing (including in short lengths) with and including all fittings, fixed on the surfaces in the walls & ceiling or laid in floors and including taking down of old ones, complete all as specified and as directed.

S&F 20mm bore medium grade, galvanized steel tubing (including in short lengths) with and including all fittings, fixed on the surfaces in the walls & ceiling or laid in floors and including taking down of old ones, complete all as specified and as directed.

M&L for cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing, etc., and making good, cutting not exc 10 cm girth, complete all as specified and as directed.

M&L for 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specified and as directed.

M&L for providing 75mm thick PCC (1:4:8) type D2 (using 40mm graded crushed stone aggregate) , as in sub base of floor/path etc. complete all as specified and directed.

M&L for cement concrete (1:2:4) type, B0 (using 12.5 mm graded crushed stone aggregates) as in roof kerbs, rounded or chamfered or hounching in Chajja to prevent water seepage into brick walls, including necessary formwork, and scalfolding upto height of 8mtr, complete all as specified and as directed.

Demolition for Concrete in ground floors and pavings exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

S&F in repairs Vitreous China Wash Down Water closet (Pedestal Pattern) 1st quality, white (excluding flushing cistern & flush pipe) including plastic water closet seat white, closed pattern with flat bottom and cover and mild steel CP or aluminised huiging device, making connections, complete all as specified and as directed.

S&F in repair vitreous china wash basin, 1st quality, white, flat back, approx size 550x400mm excluding taps but including 32 mm bore brass chromium plated waste fittings, 32mm bore PVC waste pipe, MS brackets, complete all as specified and as directed.

S & F in repair sheet glass shelf assembly 12cm wide with CP bracket guard and SS railing 60cm long. complete all as specified and as directed.

S&F in repair 25 mm dia fancy type mild steel, chromium plated curtain rod fixed in position with fixing brackets , stops, rollers, etc. complete all as specified and directed.

S & F PVC Connections 15mm size with PTMT Nuts of length 450mm and fixed, complete all as specified and as directed.

S & F PVC 75mm (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed.

S&F Sinks with drainage board made of stainless steel 1mm thick with plugs and wastes including in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160m including waste pipe & coupling 32mm including taking down old one.complete all as specified and as directed.

S&F stainless steel grating 100mm dia, complete all as specified and as directed

S & F in repair PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints, fixed in wall/ floor with access door complete all as specified and as directed.

S&F in repair 110mm bore PVC (SWR) bends (any radius) with and including rubber ring with access door, complete all as specified and directed.

Taking down carefully existing aluminium point wiring (light / fan / socket or power point) complete, with all fittings such as switch socket combination, switches, sockets, regulator, ceiling rose, utility light fittings and lamp holders etc and removing materials to stone for keeping in safe custody for reuse at siteor for taking credit and making good the disturbed surfaces of walls, roof and floor etc to match with the existing specification, complete all as specified and as directed.

M&L for point wiring for one light point/ one fan point/ one exhaust fan controlled by 1 one way switch with 1.5 Sqmm PVC insulated unsheathed single core multi-stranded copper conductor (FRLSH) cable 1100 Volts grade drawn through and including rigid non metallic PVC concealed conduit (medium grade) of suitable dia, (also including conduit fittings, along with 1.5 sqmm continuous PVC insulated unsheathed single core multi-stranded copper conductor (FRLSH) cable for earth continuity wire, connected to earth dolly and to be terminated in and including connected modular items/fixtures like modular metal push box/cover plate for mounting switches,sockets,fan regulators etc of suitable sizes, testing on completion also including cutting chases for concealed conduit, steel boxes etc, pinning in, making good the surfaces in CM 1:3 to match with the adjoining surfaces One light /Fan point controlled by one , one way switch , complete all as specified and as directed.

All as per item No 77 here-in-before but for one 3pin 5 Amp switch socket outlet, independent board , complete all as specified and as directed.

All as per item No 77 here-in-before but for one 3pin 5 Amp switch socket outlet, same board complete all as specified and as directed.

All as per item No 77 here-in-before but for one 5/15 Amp switch socket outlet, independent with 2.5 Sqmm single core multi-stranded copper conductor cable (FRLSH) along with 2.5 sqmm continuous PVC insulated unsheathed single core multi-stranded copper conductor (FRLSH) cable for earth continuity wire, for connecting 15 A socket on independnt board complete all as specified and as directed.

S & F lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings, complete all as specified and directed.

S&F ceiling rose, 3 phase, PVC/ polycarbonate, isolated body, including taking down old unsv ones complete all as specified and directed.

S&F Modular switch 1 way 6A, 1 module, complete all as specified and directed.

S&F Modular switch 1 way 16A, 1 module, complete all as specified and directed.

S&F Modular socket 2 in 1, 2/3pin, 10 Amp, complete all as specified and as directed.

S&F Modular socket 2 in 1,3pin, 6/ 16 amp, complete all as specified and as directed.

S&F Modular type ceiling Fan step regulator, 120W, 2 module, complete all as specified and directed.

Supply and fixing in repair surface and wall mounted LED batten 20 watt 4 ft long with Aluminum housing & integrated Electronic Driver with IP20, PF 0.90, total System Lumens 1050, 6500 k CRL>80, operating Voltage range 140 V -270 V complete all as specified abd as directed .

Supply and fixing in repair surface and wall mounted LED batten 10 watt 2 ft long with Aluminum housing & integrated Electronic Driver with IP20, PF 0.90, total System Lumens 1050, 6500 k CRL>80, operating Voltage range 140 V -270 V complete all as specified abd as directed .

S & F round shape 15 watt 220 volts AC(white/warm white on requried basis) recessed type with high effciency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as directed and specified.

S & F round shape 6 watt 220 volts AC(white/warm white on requried basis) recessed type with high effciency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as directed and specified.

S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified.

S&F VTPN, DB, MCCB incomer, 4 ways, double door, Metal door , IP-43 IK 09 in 250A rated copper bus bars, earth bar, neutral links, complete including blanking plates as required & fixed flush to wall and making good the disturbed surfaces in CM 1:3, complete all as specified and as directed.

S & F MCCB 4P, 125 Amps 415 V, 50 HZ, breaking capacity 16 KA ,including dismantling taking down unsv complete all as directed and specified.

Supply and fixing in repair of MCB TPN DB 4 way double door with busbar rating of 200 Amps ,415 volts ,IP-43 protection,isolated neutral bar,insulated busbar assembly,mechanical impact strength of IK08 complete all as specified and directed by Engr-in-charge.

Supply and fixing in repair of MCB TPN 63 Amps 'C' series 10kA 415 volts complete all as specified and diretced.

S&F MCB, SPN, DB, 8 ways, double door, Metal door, IP-43 IK 09 in 100A protection, isolated neutral bar, insulated busbar assembly complete including provision of blanking plates as required & fixed flush to wall and making good the disturbed surfaces in CM 1:3, complete all as specified and directed.

Supply and fixing in repair of MCB DP 40 Amps 'B' series 10kA 415 volts complete all as specified and diretced.

S&F in repair MCB, SP 6-32 amps B series 10ka 240 volts fixed flush to wall and making good the disturbed surfaces in CM 1:3, complete all as specified and directed.

Supply and fixing in repair of single Pole & Neutral enclosure with 2 pin and earth plug & socketcomplete with one single pole MCB "c" curve of 20 Amp MCB all as complete and directed by the Engineer-in-charge.

S&F energy saving BLDC ceiling fan; 5 star rating, Type of motor - Brush Less DC Motor (BLDC) and Input Power - 32 to 35 Watts with full speed and reduced power consumption with reduced speed technology, Voltage- 90-300V AC, 50Hz, single phase, RPM - 340 to 375 rpm, Blades- Decorated, Sweep - 1200 mm, Air delivery - Not less than 210 CFM with service value 6.00 BEE and Colour - Glow white/ Toast Brown/ Gloss Black or others as approved by GE, complete all as specified and as directed.

Supply and fix exhaust fan of 250 mm sweep made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, with botls nuts and washers size of the bolt 15 cm long 12 mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/0.0076 two core from ceiling rose to exhaut fan for connection and making suitable size of hole to existing brick wall for fan base complete all as specified and directed. (Note: Cost of suitable opening wall for fixing exhaut fan is deemed to be included in overall rate quoted). complete all as directed and specified.

Material and labour for sub main wiring with 2 run of single core PVC insulated (unsheathed) multi stranded copper conductor FRLSH cable of size 6sqmm and 1 run of single core PVC insulated (unsheathed) multi stranded copper conductor FRLSH cable of size 6sqmm as in continuous earth wire drawn into and including concealed PVC conduit, medium grade of 25mm bore complete with fittings, PVC Junction Boxes, fixings accessories, also including cutting chases, pinning in, making good to facing and pointing in using cement mortar (1:3) and making good disturbed surfaces including taking of old submain wiringto match with the adjoining surfaces, complete all as specified and as directed. Note:- For payment purposes, 2 runs of main cable (each of 1RM) 1 run of earth continuity cable (1RM) and one run of conduit (1RM) all together shall be considered as "1RM".

Material and labour for sub main wiring with 2 run of single core PVC insulated (unsheathed) multi stranded copper conductor FRLSH cable of size 4sqmm and 1 run of single core PVC insulated (unsheathed) multi stranded copper conductor FRLHS cable of size 4sqmm as in continuous earth wire drawn into and including concealed PVC conduit, medium grade of 25mm bore complete with fittings, PVC Junction Boxes, fixings accessories, also including cutting chases, pinning in, making good to facing and pointing in using cement mortar (1:3) and making good disturbed surfaces including taking of old submain wiring to match with the adjoining surfaces, complete all as specified and as directed. Note:- For payment purposes, 2 runs of main cable (each of 1RM) 1 run of earth continuity cable (1RM) and one run of conduit (1RM) all together shall be considered as "1RM".

M&L for Earthing complete with galvanized steel earth plate electrode 600 mm X 600 mm X 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of plate not less than 1.5 m below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel, all as shown in Electrical Plate No 3 of SSR Part - I, including necessary excavation and earth work, PCC (1:3:6) type C-1 with 50 mm thick Pre-cast RCC (1:2:4) type B-1 cover slab (reinforced with 8 mm dia deformed bar @ 15 cm C/C both ways and suitable handle of 10 mm dia round bar), including providing charcoal or coke and common salt in alternate layers of 15 cm compacted thickness all around the earth electrode, with funnel and 20 mm bore galvanized iron watering pipe (Medium grade), wire mesh, aluminium lugs, complete in all respect, GI earth strip protected by 15 mm bore (medium grade) galvanized iron pipe and other end connected with main switch board or Earthing test point as directed, including necessary earth work and disposal of spoil to a distance not exceeding 50 m and necessary testing on completion, including dismantling old unsv ones complete all as specified and as Note: GI earth wire 4sqmm dia and 15mm bore protection pipe upto 7.5m from earth plate is deemed to be included in the rate quoted be contractor.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 4 core incl taking down old unsv complete all as specified & as directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 4 core incl taking down old unsv complete all as specified & as directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm 4 core incl taking down old unsv complete all as specified & as directed.

Supply & fixing of LED post top lantern IP-65 energy saving environment friendly with high power LED as light source with opal cover soothing uniform illumination of capacity 25 Watt,230 Volt AC complete all as specified & as directed.

Excavation in trenches in soft/loose soil not exceeding 1.5 mtr deep and not exceeding 1.5 mtr wide for laying of cable and erection of poles complete all as specified and directed.

Removing excavated material n.exceeding 50 m and depositing at a level n.exc 1.5 m above the starting point all as specified & directed by Engineer-in - Charge.

Returning, filling in including spreading, leveling, watering and well ramming excavated soft/loose soil in layers complete all as specified and directed.

M&L for sand cushioning to under ground cable using locally available fine clean dry river sand over,under ground UG cable laid in treches and gently punning to cushioning to cable complete all as directed by Engineer-in-Charge. Note : For the purpose of payment only punned thickness will be measured.

M&L for brick protection cover of size 230x115x75 mm to LT underground cables with sub class 'B' over burnt brick, (locally available best quality), laid dry and flat abutting each other with gaps not exceeding 10mm complete all as specified and directed.

M & L for plain cement concrete (1:3:6) type C-2 using 40 mm graded stone aggregate in foundation of pole / strut etc including necessary form work all as specified and directed by Engineer-in-Charge.

Material and labour for boring/drilling (horizontally) manually under min 0.5 to 2 m depth in soil below existing road suitable for passing GI tubing of 40 to 80 mm bore including making good complete all as specified.

Supply and fixing of GI tubing light grade 40mm dia for protection of cable on pole , under road crossing or across drain , along electric pole or floor /wall complete all as specified and directed .

M&L for Weather proof flat three core PVC insulated and PVC sheathed industrial round 3 core flexible copper cable of size 2.5 Sqmm 1100 volts grade for connection of lights to Pole Box complete all as specified and directed.

M&L for PCC 1:3:6 type C1 using 20 mm graded aggregate as in coping and the like including weathering ,slightly rounded or chamfered angles and throating as directed.

Supply & fixing of LED bollard light fitting IP-65 designed as aluminium landscape for diffused lighting of capacity 8 Watt,230 Volt AC complete all as specified & as directed.

Supply, installation, testing and commissioning of Panel board not less than 1.2m x 1.0 m x0.60 m , outdoor cubical type factory made (CPRI approved) ,double door , front & back both side openable type fixed with Butt Hinges and locking arrangement with Aldrop latches , fabricated of CRCA sheet , inner sheet 2.0 mm thick hinged type door for individual MCCBs and outer door 3.15 mm thick,rubberised gasket, supported on 50x 50 x 6 mm angle iron and Tee section frame dust and vermin proof complete with aluminium bus bar 4 Nos, 400 Amps rated capacity mounted on porcelain insulators totally enclosed chamber for protection 3 phase 415 volt with suitable capacity aluminium bus bar / PVC insulated copper cable control wiring duly mounted on PCC foundation with suitable size of bolts, nuts & washers and connecting all I/C & O/G existing cables. Panel board shall be powder coated and angle iron frame painted with black synthetic enamel paint over a coat of red oxide primer complete, connecting existing cables with suitable size glands and lugs to accommodate and including the following :- Incoming (a) Aluminium busbar 400 Amps rated capacity-04 Nos. (b) MCCB 250 Amps, 4 pole, 415 volt, 36 KA thermal &magnetic release adjestable type - 01 No (c) Changeover Switch 250 Ams -01 No (d) Spreader Link -02 Sets Outgoing (a) MCCB 200 Amps, 4 pole, 415 volt 25 kA thermal &magnetic release adjustable type - 01 No (b) MCCB 160 Amps, 4 pole, 415 volt 16 kA thermal &magnetic release adjustable type - 01 No (c) Spreader Link -04 Sets (d) MCB TPN 63 Amps,415 Volt 'B' curve -02 Nos (e) MCB 6 Amps, 415 Volt, 'B' curve -03 Nos (f) Indication lamp Neon/ LED type (set of three) - 01 Set (g) Danger Notice plate - 01 No. (h) Panel control wiring with 16 sqmm s/c copper wire complete - 01 Job.

Darjeeling Enterprises (BID ID -3393458)

M/S JANATA CONSTRUCTION (BID ID -3392127)

MS ORIENT ENGINEERING WORKS (BID ID -3391765)

Shree Ram Construction (BID ID -3394372)

M/S B D ENTERPRISE (BID ID -3394514)

NEO BUILDERS (BID ID -3393806)

M/S TARAN INFRACON (BID ID -3395337)