CA NO GE(N)AMB-50(P)/2020-21 REPAIR TO JOINERY, PLUMBING, SANITARY , ROOF, PLASTERING, AND OTHER CONNECTED BLDG REPAIR WORKS IN AREA I AND OTHER AREAS IN OTM ACCN OF AGE B/R-1(N), AMBALA CANTT

Amount

M&L 10 mm thick cement plaster in CM 1:3 on concrete surfaces finished even and smooth with out using extra cement on ceiling including taking down cement or cement lime plaster of any description on concrete ceiling surfaces etc including scrubbing down with water etc complete all as specified and as directed by the Engineer-in-Charge.

M&L 15 mm thick cement plaster on brick or concrete walls in CM 1:6 finished even and smooth with out using extra cement including taking down cement or cement lime plaster of any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed by the Engineer-in-Charge.

M&L for 15mm thick Rough cast plaster using grit 2 to 4 mm in cement mortar 1:4 on other than fair faces of any description finished even and fair without using extra cement incl taking down cement or cement lime plaster of any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water complete all as specified and as directed by the Engineer-in-Charge.

M&L for preparation of new plastered surfaces of wall and applying two coats of oil bound distemper using painting roller over and including 2 to 3mm thick wall care putty in two or more coats for making surface smooth over one coat of primer complete all as specified and as directed by the Engineer-in-Charge.

M&L for preparation of new plastered surfaces of ceiling and applying three coats of white lime wash complete all as specified and as directed by the Engineer-in-Charge.

M&L for preparation of new plastered surfaces of wall and applying two coats of cement based paint over a coat of primer complete all as specified and as directed by the Engineer-in-Charge.

M&L for complete removal of existing treatment and applying two coats of cement based paint over recently prepared old plastered surfaces of wall complete all as specified and as directed by the Engineer-in-Charge.

M&L for preparation of existing plastered/ unplastered surface of brick/concrete wall and applying one coat of cement based paint complete all as specified and as directed by the Engineer-in-Charge.

M&L for preparation of old plastered /unplastered surface and applying two coats of white lime wash over recently prepared old plastered surfaces of wall complete all as specified and as directed by the Engineer-in-Charge.

All as per item No 1.09 above but on ceiling, complete all as specified and as directed by the Engineer-in-Charge.

M&L for applying two coats of exterior emulsion including complete removal of existing treatment of old painted surfaces of wall complete all as specified and as directed by the Engineer-in-Charge.

M&L for preparation of old plastered /unplastered surface of brick/concrete wall and applying two coats of oil bound distemper over recently prepared old painted surfaces of wall including 2 to 3 mm thick wall care putty in two or more coats for making smooth surface complete all as specified and as directed by the Engineer-in-Charge.

M&L for preparation of old plastered /unplastered surface of brick/concrete wall and applying one coats of oil bound distemper over recently prepared old painted surfaces of wall complete all as specified and as directed by the Engineer-in-Charge.

M&L for preparation of old surfaces of steel of any description over 10 cm width or girth by scrubbing down, removing loose dirt or dust and applying two coats of synthetic enamel paint over prepared old surfaces of steel complete all as specified and as directed by the Engineer-in-Charge.

All as per item No 1.14 above but one coat of synthetic enamel paint, complete all as specified and as directed by the Engineer-in-Charge.

M&L for preparation of old wooden surfaces of any description not other wise decribed over 10 cm width or girth by scrubbing down, removing loose dirt or dust and applying two coats of synthetic enamel paint over prepared old wooden surfaces complete all as specified and as directed by the Engineer-in-Charge.

All as per item No 1.16 above but one coat of synthetic enamel paint, complete all as specified and as directed by the Engineer-in-Charge.

M&L for cutting of tree from wall or roof of building n.exc 10 cm girth, taking out tree trunk including root by digging out roof and making good disturbed surface with brick work in cement mortar 1:4 or filling PCC 1:2:4 type B1 using 20mm stone aggegate to match the surface as per eixsting complete all as specified and as directed by the Engineer-in-Charge.

Preparation of new surfaces of wooden of any description not other wise decribed over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed by the Engineer-in-Charge.

Preparation of new surfaces of steel of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by the Engineer-in-Charge.

S & F in repair mild steel powder coated wooden finish curtain rod 25mm dia fixed with and including decorative brackets ,stop roller and glass at the end etc complete all as specified and as directed by the Engineer-in-Charge.

S & F of 15mm size PVC connections with PTMP nuts of length 600mm complete all as specified and as directed by the Engineer-in-Charge

M & L for 15mm bore `Medium grade` GI tubing with all fitting and fixed complete to walls and ceilings or laid in floors including taking down existing tubing complete all as specified and as directed by the Engineer-in-Charge

M & L for 20mm bore `Medium grade` GI tubing with all fitting and fixed complete to walls and ceilings or laid in floors including taking down existing tubing complete all as specified and as directed by the Engineer-in-Charge.

S&F bib taps 15mm dia fancy type brass Chromium Plated with long body screwed down for iron pipe and fixed complete all as specified and as directed by the Engineer-in-Charge.

S & F of ISI marked fancy type Pillar Tap of 15mm bore, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed by the Engineer-in-Charge.

M & L for 75mm bore PVC (SWR) multi-floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed by the Engineer-in-Charge

S & F brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed by the Engineer-in-Charge

S&F in repair for 15 mm dia angular stop valves of cast copper alloy chromium plated, screwed down, high pressure with crutch or butterfly handle complete all as specified and as directed by the Engineer-in-Charge.

S&F in repair viterious china white wash hand basin flat back white in colour ISI marked of size 550mm x 400mm with brass chromium plated waste coupling and PVC waste pipe fixed to walls with CI breckets 2 Nos embedded in CM 1:4 complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs viterous china squatting pan Orrisa pattern size 580 x 440mm white with "P" and "S" trap etc including connection to trap and to flushing pipe , anti syphonage pipe etc incl provisioning of lime concrete complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs 10 ltr PVC valveless syphonic action type flushing cistern with brackets, flush pipe etc complete including inlet ball valve float and handle including brackets of approved make including all connections & flush pipes for WC complete all as specified and as directed by the Engineer-in-Charge.

S&F in repair vitreous china wash down water closet pan ( pedestal pattern) white including connection to out going pipe and to flushing pipe and antysyphonic pipe etc including plastic water closet seat,white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed by the Engineer-in-Charge.

S&F brass chromium plated toilet paper holder complete fixed to wall complete all as specified and as directed by the Engineer-in-Charge.

S&F for stainless steel sink with out drainage board made of stainless steel 1 mm thick sheet for kitchen with waste coupling waste pipe , washer and including all necessary item including fixing to brackets and connected union to pipe complete of overall size 495 x 420 mm with bowl size 410mm x 330mm x 160mm complete all as specified and as directed by the Engineer-in-Charge.

S&F in rep plastic water closet seat white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinges device complete all as specified and as directed by the Engineer-in-Charge.

S&F for cabinet type looking mirror size 450 mm x 600 mm box type complete all as necessary items complete all as specified and as directed by the Engineer-in-Charge.

S&F brass chromium plated hand shower ( health faucet) with 8 mm dia 1 mtr long flexible tube and wall hook complete fixed to wall complete all as specified and as directed by the Engineer-in-Charge.

S&F in rep Cascade duel flush EWC with inbuilt cistern including PP seat cover , hinges fixing accesseries complete fixing with all necessary items size 640x360x690 with S trap size 220 mm complete all as specified and as directed by the Engineer-in-Charge.

S&F brass chromium plated single lever basin mixer with out popup and 450 mm long braided hoses for 15 mm bore pipe complete all as specified and as directed by the Engineer-in-Charge.

S&F brass chromium plated wall mixer with hand shower arrangement with connected leg with wall flange & wall bracket for hand shower for 15mm bore pipe complete all as specified and as directed by the Engineer-in-Charge.

S&F brass chromium plated soap dish complete all as specified and as directed by the Engineer-in-Charge.

S&F brass chromium plated overhead shower 200mmx200mm square shape single flow ABS body chrome plated with grey face plate with rubit clean system for 15mm bore pipe complete all as specified and as directed by the Engineer-in-Charge.

S&F brass chromium plated bib taps with wall flange, crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule 15mm bore complete all as specified and as directed by the Engineer-in-Charge.

S&F brass chromium plated concealed stop cock with long shank and wall flange scrwed down,high pressure with butterfly handle, screwed down both ends for iron pipe or for unions 15mm bore complete all as specified and as directed by the Engineer-in-Charge.

S&F brass chromium plated towel ring round complete all as specified and as directed by the Engineer-in-Charge.

S&F brass chromium plated corner glass self with bracket complete all as specified and as directed by the Engineer-in-Charge.

S&F brass chromium plated angular stop valves fancy type with long shank and cup concealed type screw down high pressure with butter fly handle scrwed both ends for iron pipe or for unions 15mm bore complete all as specified and as directed by the Engineer-in-Charge.

M&L for Non skid ceramic coloured tiles 7 to 8 mm thick, 1st quality (square/ rectangular) area of each tiles exc 0.11 but not exc 0.18 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or colour cement to match laid over and including 15mm cement screed bed in CM (1:4) including demolition of existing tiles complete all as specified and as directed by the Engineer-in-Charge.

M&L for Non skid ceramic coloured tiles 7 to 8 mm thick, 1st quality (square/ rectangular) area of each tiles exc 0.11 but not exc 0.18 Sqm in skirting etc set and jointed in neat cement slurry and pointed in white or colour cement to match laid over and including 10mm thick rendering in CM (1:4) including demolition of existing tiles complete all as specified and as directed by the Engineer-in-Charge.

M&L for Double charged vitrified tiles joint free 10 mm thick, 1st quality (square/ rectangular) area of each tiles exc 0.36 Sqm but not exc 1 sqm in floor etc set and jointed in neat cement slurry and pointed in white or colour cement to match laid over and including 15mm cement screed bed in CM (1:4) including demolition of existing tiles complete all as specified and as directed by the Engineer-in-Charge.

M&L for Double charged vitrified tiles joint free 10 mm thick, 1st quality (square/ rectangular) cut from area of each tiles exc 0.36 Sqm but not exc 1 sqm in skirting etc set and jointed in neat cement slurry and pointed in white or colour cement to match laid over and including 15mm thick rendering in CM (1:4) including demolition of existing tiles complete all as specified and as directed by the Engineer-in-Charge.

M & L for 25mm thick cement concrete 1:2:4 type B-1, using 20mm graded stone aggregate and finished even and fair to receive tiles etc including demolition of PCC floor of any description complete all as specified and directed by the Engineer-in-Charge

M&L for glazed coloured ceramic tiles 1st quality in vertical surfaces such as skirting /dados and riser to steps area of tiles 350mm x250mm x7mm/450x350x7mm thick set and jointed and pointing in white or coloured cement to match over and including 10 mm thick plaster in CM 1:4 including demolition of existing tiles complete all as specified and as directed by the Engineer-in-Charge.

M&L for 16 to 18 mm thick MDF board prelaminated MDF board , exterier grade (grade-1) confirming IS 14587, fixed with screws for kitchen cupboard and cabinet ,self for cupboard including hinges , brass handle and all necessary items complete all as specified and as directed by the Engineer-in-Charge.

M & L for 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed by the Engineer-in-Charge

S&F for II class HW 35 mm thick plain framed panelled shutter( two panel) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on boths face . The size of rail and style as per IS:1003 (part-1) kiln seasoned and chemically pressure treated and making good to distrubed portion with match the existing surfaces including taking down old shutter of any description with mongery complete all as specified and as directed by the Engineer-in-Charge.

S&F for 35 mm thick II class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass , gauze etc. (with out sash bars) ,edges of framing plain chamfered or rounded , fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR Part-I, section 8, clause 8.24 (a), kiln seasoned and chemically pressure treated and making good distrubed portion with existing surface including taking down old shutter of any description with mongery complete all as specified and as directed by the Engineer-in-Charge.

S & F solid PVC door frame of size 50mm x 47mm made out of 5mm prelaminated PVC sheet, reinforced with M.S. square tube and fixing in opening as per specification & drawing including taking down old chowkat of any description with hold fast complete all as specified and as directed by the Engineer-in-Charge

S&F factory made solid PVC moulded door shutters with partical board core 28 to 30 mm thick (styles) with 2, 4, or 6 raised panel design with 2 mm thick prelaminated moulded PVC sheet on the front face and 2mm thick plain colour PVC sheet on back face fixing in frame at site as per specification and drawing including taking down old shutter of any description with mongery complete all as specified and as directed by the Engineer-in-Charge.

S & F double action floor spring, hydraulically regulated, made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and as directed by the Engineer-in-Charge.

M&L for 12 mm thick prelaminated partical board interior grade prelaminated both side with decorative choice lamination fixed with screw to timber frame work/aluminium frame work complete all as specified and as directed by the Engineer-in-Charge.

S & F 100mm long mortice latch with two levers (vertical type), mild steel body complete all as specified and as directed by the Engineer-in-Charge.

S&F powder coated aluminium frame / shutter for door, window, ventilator, partition , cupboard with one or more rebats including jointing cleats and all necessary items ie rubber gasket etc including taking down old shutter of any description with mongery complete all as specified and as directed by the Engineer-in-Charge. Note:- weight of aluminium sections shall only be measured for payment in this item.

M&L for repairing of all type aluminium window/door shutter with frame and refixing it after resecuring its frame work by means of tightening with new screw or by new frame ,cleats, rubber gasket and refixing in the same opening complete all as specified and as directed by the Engineer-in-Charge. Note:- New frame shall be measured and paid for separately.

M&L for 4.8 mm thick tinted glass fixed to aluminium frame including rubber bead complete all as specified and as directed by the Engineer-in-Charge.

M & L rolled miled steel framed work as in door of angle or other section with gusset plate , rails , braces, etc complete drilled for fixing of steel sheeting or other covering. Door etc, to be prepared hanging or sliding with and including either hooks or steel hanging door fitting and hanging also fastening and fixing including one shop coat of zink chromate primer paint confirming to F-410W Gde-250 quality-A including removal of existing chowkhats complete all as specified and as directed by the Engineer-in-Charge.

M&L for PCC 1:3:6 type B-I using 20mm graded stone agg as in holdfasts complete all as specified and as directed by engineer in charge.

Supply and fixing steel window box type using ERW hollow 'P' section comprising double frame for and including gauged and glazed Skelton shutter 30mm thick, jointed internally with flat iron 25x3mm complete including hinges, handle, tower bolts, stops, lugs, guard bars and painting etc. all as shown on drawing No. TD-219 sheet 1/3 to 3/3 and TD-220 sheet 1/3 to 3/3 as applicable complete including taking down existing windows of any size and description complete all as specified and as directed by engineer in charge. Note: (i) For the purpose of measurement and payment double shutter both glazed and gauzed with frames shall be considered as one unit. (ii) Unit rate quoted against this item shall also include the iron mongery and grill as shown on drgs. (iii) Glazing, wire mesh shall be measured and paid for separately.

M & L for sheet glass 3.0mm thick, ordinary quality and glazing with oil putty in square n exc 0.5 sq m in each pane complete all as specified and as directed by the Engineer-in-Charge

M & L in repair for sheet glass 3.0mm thick , ordinary quality and glazing with oil putty in square n exc 0.5 sq m in each pane including hacking out old glass pane complete all as specified and as directed by the Engineer-in-Charge

S & F for galvanized mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified and as directed by the Engineer-in-Charge.

S & F 150mm aluminium handles, cast type, anodised complete all as specified and as directed by the Engineer-in-Charge

S & F 200mm long aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed by the Engineer-in-Charge

Supply and fixing for ISI marked 250mm long aluminum alloy, anodized sliding bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloys to door shutter complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing for butt hinge ISI Marked 100mm size, medium weight, cold rolled mild steel complete all as specified and as directed by the Engineer-in-Charge.

S&F for mild steel 150 mm ordinary rat tail rod pattern springs including rollers and roller plate etc complete all as specified and as directed by the Engineer-in-Charge.

S&F for 32 mm dia PVC waste pipe for wash hand basin / Kitchen sink etc complete all as specified and as directed by the Engineer-in-Charge.

S & F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors including dismantling of existing pipes complete all as specified and as directed by the Engineer-in-Charge

S & F 110mm bore PVC (SWR) bends of any radius, complete all as specified and as directed by the Engineer-in-Charge.

S & F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls including dismantling of existing pipes complete all as specified and as directed by the Engineer-in-Charge.

S & F 75mm bore PVC (SWR) bends of any radius, complete all as specified and as directed by the Engineer-in-Charge.

M & L for 1000 Litres rotational moulded polyethylene water storage tanks triple layer(cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including dismantling water tanks exc 500 but not exc 1000 litres complete all as specified and as directed by the Engineer-in-Charge

M & L for 500 Litres rotational moulded polyethylene water storage tanks triple layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including dismantling water tanks exc 250 but not exc 500 Litrescomplete all as specified and as directed by the Engineer-in-Charge

S & F ISI Marked 20mm dia Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and as directed by the Engineer-in-Charge.

S & F 605x605 mm Galvanised powder coated snap grid frame works for false ceiling including fixing of arrangement including hanging.The snap grid shall consist of aluminium main and cross tee of size 24mmx32mmx 0.30mm and 15mm x32mmx0.30mm respectively . The snap grid frame shall fixed to ceiling with supporting hangers consisting of 4 mm dia GI wire with necessary bolts and nuts and washers including laying 6 mm thick gypsum board ceiling including taking down existing boarding/ false ceiling Make of Snap Grid frame Armstrong or Equivalent

S & F hollow PVC wall lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing including taking down existing boarding/ panelling complete all as specified and as directed by the Engineer-in-Charge

M & L for brickwork with sub-class `B` bricks, straight or curved on planexc 6m mean radius built in CM 1:4 including demolition of brickwork complete all as specified and as directed by the Engineer-in-Charge

S&F in repair galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire staple complete all as specified and as directed by the Engineer-in-Charge.

S & F 6mm thick asbestos cement, corrugated or semi-corrugated sheets fixed with L-type or J-type or cranked hook bolts in roofs, walls etc. including taking out existing sheets complete all as specified and as directed by the Engineer-in-Charge

Dismantling wooden scantling of any description not otherwise provided for complete all as specified and as directed by the Engineer-in-Charge.

S & F rolled mild steel work in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc., quality confirming to Fe-410W (Gde-E-250) quality-A complete all as specified and as directed by the Engineer-in-Charge

Demolition of Cement concrete (Unreinforced) of any description in ground floors and pavings n exe 15 cm thickness (below or above ground level) complete all as specified and as directed by the Engineer-in-Charge.

M & L for 75mm thick cement concrete 1:4:8 type D-2, using 40mm graded stone aggregate as in sub base and finished even and fair incl demolition complete all as specified and as directed by the Engineer-in-Charge

M &L 10mm thick coloured paver tiles (Endura Tiles) of size 300 x 300mm over and including a layer of 20mm thick screed bed in C.M 1 :4 joints filled with coloured cement to match the tiles, complete all as specified and as directed by the Engineer-in-Charge.

Dismantling Brick tiles or terracing tiles, single layer on roofs complete all as specified and as directed by the Engineer-in-Charge.

Demolition of Mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) complete all as specified and as directed by the Engineer-in-Charge.

M & L for providing cement concrete 1:2:4 Type B1 using 20mm graded aggregate as in roof kerbs or mud stops,padding, rounded or chamfered on edges including from work where ever required complete all as specified and as directed by the Engineer-in-Charge.

M & L Pepairing roof surfaces and applying water proofing treatment over roofs comprising of the following,Complete all as specified & as directed:- (i) Applying oil bound bitumineous primer at the rate of 0.40 Liters/Sqm as per IS 3384-1986 on prepared surfaces.Surface shall be kept free till the moment, the primer is impregnated and the solvent oil in primer is evaporated. (ii) Laying 3mm thick APP polymeric water proofing membrane of weight not less than 3.6 Kg/Sqm, black finished reinforced with non woven polyster matt, with a thermo fusible finish,torching overlaps with a propane or butane gas torch, with a overlap of 75mm at sides and 100mm at the ends,and sealing including applaying a coat of cold emulsion bitumineous primer all as per manufacturer's instruction including prepration of surface. (iii) Applying one coat of hot straight run bitumen grade 30/40 (Grade S-35) confirming to IS -73 at the rate of 1.2 Kg/Sqm. Note:- The water proofing treatment shall be carried out by manufacturer or his authorized applicators in terms of clause 11.43 of MES Sch Part-'I' (2009)

Overhauling, serviceing and realignment of rolling shutters any size including replacement of defective bearing and grinding of wheels for smooth movement of doors , replacement of clamps, bolts etc including cleaning oiling and greasing of moveable parts and welding work complete all as specified. Note :- Necessary arrrangement of crane/moveing ladder shall be made by the contractor and quoted rate shall be deemed to includ this element .

Replacement of existing unserviceable mild wheel gear box with new wheel gear box of suitable for large size shutters having area more then 8 sqm including handle as per existing size complete all as specified and as directed by the Engineer-in-Charge.

S & F for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa having zinc coating 150 gsm (AZ 150) as in roof covering/cladding to wall, fixed with self tapping screws including taking out existing sheets complete all as specified and as directed by the Engineer-in-Charge.

S & F for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa having zinc coating 150 gsm (AZ 150) as in roof covering/cladding to wall, gutters fixed with self tapping screws complete all as specified and as directed by the Engineer-in-Charge.

M & L for machine cut kota stone slab flooring 20-25mm thick and of size not less than 550 mm x 550 mm over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding, rubbing and polishing over and including 15mm thick screed bed in CM 1:4 and demolition of PCC of any description in ground floor complete all as specified and as directed by the Engineer-in-Charge

M & L for Cutting Chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc,: and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20 cm girth in brick walls.

Cuttting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps,cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring etc.; and making good, cutting not exc 10 cm girth in brick walls.

S & F aluminum (die cast ) body door closer hydraulicully regulation designation No. 3, universal type, suitable for wooden/aluminium doors shutters of 851 to 1000mm in width and of weighing 60 to 80 Kg including easing out shutter and refixing the hinges complete all as specified and as directed by engineer in charge.

M & L Asbestos cement one piece plain angular ridge 6mm thick fixed with L or J hooks complete all as specified and as directed by engineer in charge.

Material and labour for 3 mm thick plaster of paris ceiling (Gypsum Sqm anhydrous) to flat surface of ceiling including removing exisiting gypsum ceiling complete all as specified and as directed by engineer in charge.

M & L for 2 mm thick fibre glass reinforced translucent plain sheeting of color approved by GE with side lap fixed with coach screw and washer in roof, wall etc. complete all as specified and as directed by engineer in charge.

Swami Enterprises

JS CONSTRUCTION COMPANY

bhagwandasswazirchand

Sham Sunder Bansal

RONKI RAM AND COMPANY

Karishan Kumar goel