Construction of foundation and allied civil works of LIN storage tank

Amount

NEW LIN Tank and allied works

15.2.1 : Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

15.3 : Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of Engineer -in-Charge.

15.7.4 : Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar

15.9.1 : Demolishing stone rubble masonry manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer -in- Charges:In Lime Mortor

15.60 : Disposal of building rubbish/ malba/ similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved

od181657/2020_2021 : Dismantling expanded metal or I.R.C. fabrics or chain link fencing with necessary battens and beading including stacking the serviceable material and disposal of scrap within company premises as per direction of engineer in charge.

od181658/2020_2021 : Dismantling and stacking fencing posts or struts and bracing including all earth work and dismantling of concrete etc. in base of (Vertical embedded post shall be measured for payment), with in company premises as per direction of engineer in charge.<br>T or L iron or pipe.

2.31 : Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared

2.32 : Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared.

2.33.1 : Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material.Beyound 30 cm girth up to and including 60 cm girth

2.6.1 : Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil

2.25 : Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.

od181685/2020_2021 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:( The required cement shall be supplied by company at our store)<br>1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

od182600/2020_2021 : Dry stone soling 22.5 cm thick laid in courses in level with hammer dressed stones having no side less than 15 cm, with minimum depth of 20 cm including preparing the bedding surface etc. all complete ( Payment for stone to be made separately)

od182601/2020_2021 : Supplying and stacking of hard stone ( for stone soling ) 22.5 cm thick at stie.

60.2.2 : Bailing out water Using 5HP Pump- Bailing out water with 5HP engine and pump set including conveyance to site and erection,cost of fuel, lubrication oil and other stores, pay of staff etc complete

od181577/2020_2021 : Boring, providing and installation bored cast-in-situ reinforced cement<br>concrete piles of grade M-25 of specified diameter and length below pile cap,<br>to carry a safe working load not less than specified, excluding the cost of OPC/PPC Cement,<br>steel reinforcement but including the cost of boring with bentonite solution<br>and temporary casing of appropriate length for setting out and removal of<br>same and the length of the pile to be embedded in the pile cap etc. by Crawler<br>mounted, telescopic boom hydraulic pilling Rig all complete, including removal<br>of excavated earth with all its lifts and leads (length of pile for payment shall<br>be measured up to bottom of pile cap).<br>Note: Truck Mounted rotary/TMR/Tube well boring machine shall not be used.800 mm dia piles(The required OPC/PPC Cement shall be supplied by KMML at our Store)

od181669/2020_2021 : Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix(mix design shall be contractor's scope), including pumping of concrete to site of laying but excluding the cost of Cement(required cement shall be supplied by KMML at our stores),centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum.<br>All work upto plinth level

od181682/2020_2021 : Providing and laying in position machine batched and machine mixed design mix M-30 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of cement,centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 340 kg/ cum.(The required opc/ppc cement shall be supplied by KMML at our site)<br>All work upto plinth level

od187858/2020_2021 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:(The required Cement shall be supplied by KMML at our store)<br>1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

16.45 : Providing and fixing in position pre- moulded joint filler in expansion joints.

od185308/2020_2021 : Steel work in built up G I tubular (square or rectangular hollow tubes etc.) of make TATA STRUCTURA welded in framed work, including all materials ,cutting, hoisting, fixing in position and applying a priming Epoxy primer coat of approved primer etc. as required.<br>In gates and similar works

od185315/2020_2021 : Providing and fixing mild steel round sliding bolt,handle,tower bolt, holding down bolts with nuts, plate and washer plates complete for Gate and embedding the same in concrete .

od185325/2020_2021 : Steel work welded in built up sections/framed work, including all materials, cutting, hoisting, fixing in position and applying epoxy priming coat of approved steel primer etc. as required.<br>In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

13.52.1 : Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work

od182797/2020_2021 : Providing and fixing nylon coated G.I. chain link fabric fencing of required width in mesh size 50x50 mm made of G.I wire of dia 2 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer - in- Charge.

od181689/2020_2021 : Providing and applying anti corrosive protective coating of Nitozinc primer/Cera Zinc or similar Zinc rich primer of approved brand over steel reinforcement as per the manufacture's specification as per direction of Engineer-in-charge. The product shall be applied on reinforcement steel after thoroughly cleaning. painted area of steel shall be considered for payment.

od181693/2020_2021 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level(The required reinforcement steel shall be supplied by KMML at our stores)<br>Thermo - Mechanically Treated bars of grade Fe-500D or more

od187109/2020_2021 : Plastering with 12 mm cement plaster of mix:<br>1:4 ( 1 cement : 4 fine sand)(The required cement shall be supplied by KMML at our store)

13.65.1 : Painting with black anti- corrosive bitumastic paint of approved brand and manufacture to give an even shade:Two or more coats on new work

5.9.1 : Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete

5.9.2 : Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

od187102/2020_2021 : Grouting pocket holes using flowable non shrink grouting material like conbextra GP2 or like as per manufactures specification inluding all labour,surface preparation,materials etc

od187103/2020_2021 : Providing,fixing and aligning pocket holes in concrete made out of plywood of size upto 20x20cm of deep 700mm as per direction of engineer in charge

hari sree engg works

Amrita builders

Bidder Name

hari sree engg works

Amrita builders

BIOHOMES PROJECTS PRIVATE LIMITED