Construction of Primary Health Centre at Village Brot in Distt. Kurukshetra (CM Announcement Code No. 24169 dated 30.10.2018) (Pdg. Internal EI/Estate) (Recall).

Amount

1 Main Switches ( a ) 1.1 Supply and erection of metal clad switches / B.D.Bs with rag bolts on wall or on existing angle iron board / pedestal including bonding to earth and necessary connections. HRS No. 31.12 1.2 Triple pole switch with neutral link 32 amp. 415 Volts. HRS No. 31.12(a) (xiv) Cat-B

1.3 Triple pole switch with neutral link 63 amp. 415 Volts. HRS No. 31.12 (a) (xv) Cat-B

2 Moulded case Circuit breakers. ( c ) 2.1 Supply and erection of moulded case circuit breakers on wall or on existing pedestal including bonding to earth and necessary connections. HRS No. 31.12 ( c) 2.2 15 amp.to 60 amp. 415 V ,10 KA 3-phase. HRS No. 31.12 c (i)

3 S/E of M.S. angle iron frame duly welded for housing M.S. sheet & main switches etc. on it, fixed on wall by means of suiteble size of rag bolts with cement concrete ,duly painted with three coats of approved paint including one coat of red oxide. HRS No. 31.13 3.1 Size 40 mm x 40 mm x 6 mm. HRS No. 31.13(ii)

4 M.S.Sheet . HRS No. 31.14 4.1 Supply and erection of 3 mm thick mild steel sheet duly welded on existing M.S. angle iron frame for fixing the main switches etc. as required, duly painted with three coats of approved paint including one coat of red oxide. HRS No. 31.14 (i)

5.1 Distrubution board with plug and socket. HRS No. (K) 5.2 Supply and erection of sheet steel enclosure 2 pole / 3 pole with earth plug and socket suitable for incorporating single pole / triple pole MCB on wall / on existing pedestal complete with necessary connections etc. HRS No. 31.15 5.3 S.P.N. enclosure for single pole MCB 20 amp. HRS No. 31.15 (ii)

6 S/E of miniature circuit breaker/ isolator 240 /415 V in the existing D.B including making necessary connections. HRS No. 31.17 6.1 SP MCB of 9 KA breaking capacity 6 amp. to 32 amp. HRS No. 31.17a) (ii)

6.2 SPN MCB of 9 KA breaking capacity 40 amp. to 63 amp. HRS No. 31.17(a) (iii)

7 Supply and erection of Fittings and Accessories. HRS No. (M) 7.1 Call bell 220 / 230 volts A.C. bakelite with double coil. HRS No. 31.18 (vii)

7.2 Bakelite angle / straight button holder large size. HRS No. 31.18 (xi)

7.3 Switch 5 amp. On existing sheet. HRS No. 31.18 (xii)

7.4 Wall socket 5 amp. On existing sheet. HRS No. 31.18 (xiii)

7.5 Erection only of 1x40 watts or 2x40 watts 1220 mm long / 1x20 watts or 2x20 watts ,610 mm long fluorescent tube fitting directly on wall including necessary connections with 0.75 sqmm ( 24 / 0.20 mm ) PVC copper flexible cable for connecting the tube with the adjecent point. HRS No. 31.18 (xxiv)

7.6 Supply and erection of hexagonal M.S. box 1.60 mm thick having each side 8 cms , 7.5 cms deep top covered with M.S. lid by means of screws including 10 mm dia 30 cm long mild steel rod made into suitable suspension hook and erected in RCC slab for erection of fan , the bottom covered with 3 mm thick bakelite sheet with suitable holes , painting etc. complete with all labour and material required to complete the job. HRS No. 31.18 (xxvi)

7.7 Supply and erection of lumineous bell indicator complete including making necessary connections and fixing the same on wall etc. to complete the job in all respect. HRS No. 31.18 (xxviii)

8 Erection and carriage of fans.. (O) 8.1 Erection of ceiling fan complete with necessary earthing of fan and regulator including carriage from local railway station /goods transport /PWD store to the site of work. HRS No. 31.20 (i)

8.2 Erection of exhaust fan complete with necessary earthing of fan and regulator including carriage from local railway station /goods transport /PWD store to he site of work. HRS No. 31.20 (iii)

8.3 Making suitable hole in the wall upto 450 mm sweep exhaust fan including finishing the same and fixing of wire mesh duly fixed with Deodar wood frame of section 40 mm x 25 mm thick. HRS No. 31.20 (v)

8.4 Pdg. and fixing of required size of deodar wood frame of section 50 mm x 32 mm for fixing exhaust fan upto 450 mm sweep. HRS No. 31.20 (vi)

9 Supply and erection of pipe for wiring purposes including bends inspection boxes etc. where necessary and painting as required. HRS No. 31.21 9.1 Galvanised iron pipe 20 mm dia on flushed. HRS No. 31.21 (ix)

9.2 Heavy guage welded conduit pipe 20 mm dia 1.60 mm thickness flushed. HRS No. 31.21 (xxi)

9.3 Heavy guage welded conduit pipe 25 mm dia 1.60 mm thickness flushed. HRS No. 31.21 (xxii)

9.4 Supply and erection of PVC pipe of 6 kg. pressure laid 1 metre below ground level complete including digging refilling of the trench with jointing etc. HRS No. 31.21(xxx) 9.5 PVC pipe 80 mm dia. HRS No. 31.21(xxx) (b)

10 (Q) Earthing 10.1 Earthing with GI earth pipe 4.5 m long and 40 mm dia with masonry enclosure on the top etc. as required . HRS No. 31.22(i)

10.2 Extra for using salt and charcoal / coke for pipe earth electrode as required. HRS No. 31.22(ii)

10.3 Pdg. and laying earth connections from earth electrode with 4.00 mm dia G.I. wire in 15 mm dia G.I. pipe from earth electrode as required . HRS No. 31.22(xii)

10.4 Pdg. and fixing 4.00 mm dia G.I.wire on surface or in recess for loop earthing as required . HRS No. 31.22(xvi)

10.5 Earthing with GI earth plate 600 mm x 600 mm x 6 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as equired. HRS No. 31.22(iii)

10.6 Extra for charcoal or coke and salt for G.I. Plate or copper plate earth electrode. HRS No. 31.22(v)

10.7 Pdg. and fixing 25 mm x 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode as required . HRS No. 31.22(xi)

10.8 Pdg. and fixing 25 mm x 5 mm G.I. Strip on surface or in recess for connections etc. as required with all labour and material. HRS No. 31.22(xv)

11 Supply and erection of under ground cable ,loose in existing pipe or trenches complete with necessary connections . HRS No. 31.26 11.1 10 Sq. mm 2 Core Cable . HRS No. 31.26 (iv) Ard.

11.2 25 Sq. mm 4 Core Cable . HRS No. 31.26 (xIi) Ard.

11.3 95 Sq. mm 3.5 Core Cable . HRS No. 31.26 (xxix) Ard.

12 Supply and erection of suitable compression type brass cable glands for underground Cable. HRS No. 31.28 12.1 25 Sqmm to 50 Sqmm Cable 2 to 4 Core. HRS No. 31.28 (iii)

12.2 70 Sqmm to 95 Sqmm Cable 3 to 3.5 Core . HRS No. 31.28(iv)

13 Miscellaneous . HRS No. 31.35 13.1 Supply and erection of 75 mm x75 mm x 60 mm deep M.S.box for telephone and inter-communication system including 2 pin 5 amp. socket including cost of bakelite sheet . HRS No. 31.35 (vii)

14 PVC Insulated wiring in recessed conduit. HRS No. (A) 14.01 Wiring in 1.5 sq.mm PVC Insulated copper conductor cable in 1.6 mm thick conduit pipe. HRS No. 31.36 14.02 Fan Point - Medium . HRS No. 31.36

14.03 Fan Point- Long. HRS No. 31.36

14.04 Light point -Short. HRS No. 31.36 (ii)

14.05 Light Point - Medium. HRS No. 31.36

14.06 Light Point- Long. HRS No. 31.36

14.07 Twin control light point with 2 way 5 amp. single pole switch- Long point. HRS No. 31.36 (iii) c

14.08 Call bell point including M.S Box of size 180mmx100mmx60mm deep for call bell - Long point HRS No. 31.36 (vi) c

14.09 3 pin 5 amp. plug point including earthing the 3rd. pin etc. - Short point. HRS No. 31.36 (vii) a

14.1 3 pin 5 amp. plug point including earthing the 3rd. pin etc.-Long point. HRS No. 31.36 (vii) c

14.11 3 pin 15 amp plug point including earthing the 3 rd. pin etc.with 4 sq mm PVC insulated Al.conductor cable - Long point. HRS No. 31.36 (viii) c

15 S/E of PVC unsheathed copper conductor cable single core 1100 volts grade in pipe of suitable size excluding cost and erection of pipe. HRS No. 31. 40 15.1 Size 1.5 sqmm (3 / 0.81mm). HRS No. 31.40 (i)

15.2 Size 2.50 sqmm (3 / 1.05mm). HRS No. 31.40 (ii)

15.3 Size 4 sqmm (7 / 0.85mm). HRS No. 31.40 (iii)

16 Supply and erection of double door sheet steel enclosures distribution boards suitable for MCBs and ELCBs etc. recessed in wall including bonding to earth with all labour and material requared complete the job in all respect upto the entire satisfaction of the Engineer-in Charge of the work. HRS No. 31.41 16.1 8-way, SP & N (Horizontal) HRS No. 31.41 (ii)

16.2 4-way, TP & N (Horizontal) (8+12) HRS No. 31.41 (iv)

17 Supply and erection of PVC conduit pipe ISI marked (Medium) recessed in wall / ceiling etc. including cost of PVC bends, inspection box and all other material requiredto complete the job in all respect to the entiresatisfaction of Engineer-in-Charge of work. HRS No. 31.44 17.1 25 mm dia HRS No. 31.44(b)

18 Supply and erection of Socket size rotary step type electronic regulator for A.C. ceiling fan Anchor make Deluxe model No.50440 ISI/SSK make PC 561 operated on 120/280 V A.C. supply complete including cutting of existing bakelite sheet and making necessary connection etc up to the entire satisfaction of Engineer-in-Charge of work. HRS No. 31.55

19 S/E of mark double walled corrugated (DWC) HDPE pipe laid 1 Mtr. Below ground level including diging and refilling of earth including cost of suitable size socket cuppler for HDPE pipe including the cost of labour and material required to complete the job in all respect up to entire satisfaction of Engineer- incharge of the work. HRS No. 31.67 19.1 HDPE Pipe 90/75 outer dia / inner dia. HRS No. (ii)

20 Supply & erection of Module case circuit breaker single pole / 4 pole on wall/ on existing pedestal including bounding to earth and making necessary connection required to complete the job in all respect upto the entire satisfaction of Engineer in Charge of work. HRS No. 31.69 20.1 4 pole MCCB 200 amp. HRS No. (vi)

22 S/E of MS Box of Size 8" X 10" X 4" (20CMx25CM) AND 10CM deep made one of 1.6mm thick MS covered with 5mm thick bakelite sheet for fixing of 4nos. Socket and switch of 6amp. and one no. fuse unit and indicator of approved make. The MS Box is recessed in wall including cost of necessary cement sand & mixture required to complete the job in all respect with cost of necessary labour charges for fixing the bakelite sheet and complete then job in all respect up to entire satisfaction of Engineer-in-charge of work. HRS No. NS-1

23 Supply & erection of MCCB enclosure for 4 Pole MCCB upto 200 Amps, Cat. Ref- 811989 Make- INDOASIAN, Complete with labour and material required to complete the job in all respect upto the entire satisfaction of Engineer-in-charge of work. Make- Havells, HPL, Standard. HRS No. NS-2

N.K.Enterprises

Choudhary Electricals

M/s JSB Enterprises