Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.5 CrAdmitted-Finance | ₹1.5 Cr | L1 | Admitted-Finance |
| 2 | L2₹1.7 Cr+₹28.7 L (19.7%)Admitted-Finance | ₹1.7 Cr+₹28.7 L (19.7%) | L2 | Admitted-Finance |
| 3 | L3₹3.0 Cr+₹1.5 Cr (105.8%)Admitted-Finance ROOM NO 12 274 MOHAN MANSION SBS ROAD FORT MUMBAI MUMBAI MAHARASHTRA 400001 | MUMBAI | MAHARASHTRA | 400001 | ₹3.0 Cr+₹1.5 Cr (105.8%) | L3 | Admitted-Finance |
| Sl No | Description | Qty | Unit | NALIN P SHAH L2 | noble construction L1 | ROY INFRA AND DEVELOPERS L3 |
|---|---|---|---|---|---|---|
| 1.00 | Applying two coats of bitumen hot or cold and one layer of Hessian based bitumen felt as a leak proof treatment on the existing AC sheets / RCC roofs cracked at the ridge portion and sloping part and also nut and bolt holes provided along with the joints isolated cracks and patch repairs of identical nature including necessary cleaning of the surfaces, scaffolding with all lifts and leads, all complete.
Note: Tarfelt and Bitumen will be supplied by MDL | 3,700 | Sq.M. | 4,07,000 ₹4,80,260 | 1,85,000 ₹2,18,300 Lowest | 7,77,000 ₹9,16,860 |
| 2.00 | Applying Two coat of hot bitumen layer without Hessian based bitumen felt as a leak proof treatment on the existing AC sheets / RCC roofs cracked at the ridge portion and sloping part and also nut and bolt holes provided along the joints and isolated cracks and patch repairs of identical nature including necessary cleaning of surfaces prior to bitumen application, scaffolding with all lifts and leads, all complete as directed.
Note: Bitumen will be supplied by MDL | 100 | Sq.M. | 9,000 ₹10,620 | 4,500 ₹5,310 Lowest | 16,000 ₹18,880 |
| 3.00 | Dismantling carefully existing broken damaged A.C. sheets from roof, side cladding, gable end etc, providing and fixing new A.C. sheets 6mm thick of Everest / Charminar make or equivalent with end overlap of 150 mm and side overlap of one and half corrugation at the same place with necessary 8mm dia G.1 1 or 1 hooks, bolts and nut, bitumen washers in any height including necessary scaffolding with all lifts and leads, etc, all complete and measurement as per laid area after completion of work.
Note: Rates should be inclusive of take away damage AC Sheets from MDL premises to Municiple dumping ground. | 1,520 | Sq.M. | 8,74,000 ₹10,31,320 | 7,29,600 ₹8,60,928 Lowest | 8,81,600 ₹10,40,288 |
| 4.00 | Removing the north light glasses and re-fixing the same after cleaning and cutting to the required size with neatly putted to the glazing frame. | 50 | Sq.M. | 25,000 ₹29,500 | 22,500 ₹26,550 Lowest | 24,000 ₹28,320 |
| 5.00 | Removing existing broken/damaged north light glasses and providing and fixing new 6 mm thick wired/reinforced glass neatly secured to the glazing frame etc; all complete, including scaffolding.
Note: Rates should be inclusive of take away damage glass Sheets from MDL premises to Municiple dumping ground. | 50 | Sq.M. | 80,000 ₹94,400 | 50,000 ₹59,000 Lowest | 1,60,000 ₹1,88,800 |
| 6.00 | Cleaning of MS/GI roofs, eve valley gutters upto 350mm periphery of round rectangular section manually with broom etc all complete as directed.
Note: Rates should be inclusive of take away debris from MDL premises to Municiple dumping ground. | 7,650 | Mtr | 2,67,750 ₹3,15,945 Lowest | 2,83,050 ₹3,33,999 | 4,59,000 ₹5,41,620 |
| 7.00 | Cleaning of MS/GI roofs, eve valley gutters 350mm to 600mm periphery of round rectangular section manually with broom etc all complete as directed.
Note: Rates should be inclusive of take away debris from MDL premises to Municiple dumping ground. | 2,735 | Mtr | 95,725 ₹1,12,955.5 Lowest | 1,01,195 ₹1,19,410.1 | 2,46,150 ₹2,90,457 |
| 8.00 | Cleaning of grass, tree leafs, bituminous old tarfelt of MS/GI/Galvalume/AC roofs, roof slab , terrace slab, balcony, chajja etc manually with broom etc all complete as directed.
Note: Rates should be inclusive of take away unservicable materials from MDL premises to Municiple dumping ground. | 22,700 | Sq.M. | 7,94,500 ₹9,37,510 Lowest | 8,39,900 ₹9,91,082 | 13,62,000 ₹16,07,160 |
| 9.00 | Removing of chokage to the rain water pipes of dia 75mm,100 mm &150 mm by using manual rodding with flushing of water including opening cleaning, removal of debris and refitting etc all complete as directed.
Note: Rates should be inclusive of take away debris from MDL premises to Municiple dumping ground. | 180 | Nos | 1,08,000 ₹1,27,440 | 18,000 ₹21,240 Lowest | 81,000 ₹95,580 |
| 10.00 | Providing and fixing Ridges and hips ( 6 mm thick AC corrugated sheet north light curves) in AC sheets roofing with North light adjustable hips match with AC sheeting placed with necessary 8mm dia G.I. J or L hooks, bolts and nut, bitumen washers in any height including necessary scaffolding with all lifts and leads etc, all complete.
Note: Rates should be inclusive of take away damage AC Sheets from MDL premises to Municiple dumping ground. | 70 | Mtr | 35,000 ₹41,300 | 21,000 ₹24,780 Lowest | 37,100 ₹43,778 |
Tender Value
Refer Docs
EMD Value
₹3 L
Closing Date
11 Apr 2022, 3:00 pmClosed
VIVEK KORDE
MDL OTS
Monsoon repair of various Building, Workshop, Sheds etc. in MDL at North and South Yard, Alcock yard, East Yard and Anik Chembur Yard
2022_MDL_89445_1
6000001465
Open Tender
Miscellaneous Services
Service
730 days
MDL OTS
As per tender
8 documents required · 8 mandatory
₹0
₹3 L
Yes
19 May 2022
21 Mar 2022
12 Apr 2022
21 Mar 2022
11 Apr 2022
21 Mar 2022
Applying two coats of bitumen hot or cold and one layer of Hessian based bitumen felt as a leak proof treatment on the existing AC sheets / RCC roofs cracked at the ridge portion and sloping part and also nut and bolt holes provided along with the joints isolated cracks and patch repairs of identical nature including necessary cleaning of the surfaces, scaffolding with all lifts and leads, all complete. Note: Tarfelt and Bitumen will be supplied by MDL
Applying Two coat of hot bitumen layer without Hessian based bitumen felt as a leak proof treatment on the existing AC sheets / RCC roofs cracked at the ridge portion and sloping part and also nut and bolt holes provided along the joints and isolated cracks and patch repairs of identical nature including necessary cleaning of surfaces prior to bitumen application, scaffolding with all lifts and leads, all complete as directed. Note: Bitumen will be supplied by MDL
Dismantling carefully existing broken damaged A.C. sheets from roof, side cladding, gable end etc, providing and fixing new A.C. sheets 6mm thick of Everest / Charminar make or equivalent with end overlap of 150 mm and side overlap of one and half corrugation at the same place with necessary 8mm dia G.1 1 or 1 hooks, bolts and nut, bitumen washers in any height including necessary scaffolding with all lifts and leads, etc, all complete and measurement as per laid area after completion of work. Note: Rates should be inclusive of take away damage AC Sheets from MDL premises to Municiple dumping ground.
Removing the north light glasses and re-fixing the same after cleaning and cutting to the required size with neatly putted to the glazing frame.
Removing existing broken/damaged north light glasses and providing and fixing new 6 mm thick wired/reinforced glass neatly secured to the glazing frame etc; all complete, including scaffolding. Note: Rates should be inclusive of take away damage glass Sheets from MDL premises to Municiple dumping ground.
Cleaning of MS/GI roofs, eve valley gutters upto 350mm periphery of round rectangular section manually with broom etc all complete as directed. Note: Rates should be inclusive of take away debris from MDL premises to Municiple dumping ground.
Cleaning of MS/GI roofs, eve valley gutters 350mm to 600mm periphery of round rectangular section manually with broom etc all complete as directed. Note: Rates should be inclusive of take away debris from MDL premises to Municiple dumping ground.
Cleaning of grass, tree leafs, bituminous old tarfelt of MS/GI/Galvalume/AC roofs, roof slab , terrace slab, balcony, chajja etc manually with broom etc all complete as directed. Note: Rates should be inclusive of take away unservicable materials from MDL premises to Municiple dumping ground.
Removing of chokage to the rain water pipes of dia 75mm,100 mm &150 mm by using manual rodding with flushing of water including opening cleaning, removal of debris and refitting etc all complete as directed. Note: Rates should be inclusive of take away debris from MDL premises to Municiple dumping ground.
Providing and fixing Ridges and hips ( 6 mm thick AC corrugated sheet north light curves) in AC sheets roofing with North light adjustable hips match with AC sheeting placed with necessary 8mm dia G.I. J or L hooks, bolts and nut, bitumen washers in any height including necessary scaffolding with all lifts and leads etc, all complete. Note: Rates should be inclusive of take away damage AC Sheets from MDL premises to Municiple dumping ground.
Providing and fixing Ridges and hips ( 6 mm thick AC Ridge) in AC sheet roofing with North light adjustable hips match with AC sheeting placed with necessary 8mm dia G.I. J or L hooks bolts and nut, bitumen washers in any height including necessary scaffolding with all lifts and leads etc all complete. Note: Rates should be inclusive of take away damage AC Sheets from MDL premises to Municiple dumping ground.
Providing & fixing PVC Rain water pipes conforming to I.S.13592-1992 including proper rain water receiving recess with PVC plug bend, necessary fittings such as offsets, shoes including fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall and fixing with clips of approved quality and number, filling the joints using rubber gasket with solvent cement and properly resting the shoe of pipes on cement concrete or masonry blocks, including necessary scaffolding and maintenance for 3 years for any leakages or dislocation of pipes. 75 mm outer dia
Providing & fixing PVC Rain water pipes conforming to I.S.13592-1992 including proper rain water receiving recess with PVC plug bend, necessary fittings such as offsets, shoes including fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall and fixing with clips of approved quality and number, filling the joints using rubber gasket with solvent cement and properly resting the shoe of pipes on cement concrete or masonry blocks, including necessary scaffolding and maintenance for 3 years for any leakages or dislocation of pipes. 100/110 mm NB
Providing & fixing PVC Rain water pipes conforming to I.S.13592-1992 including proper rain water receiving recess with PVC plug bend, necessary fittings such as offsets, shoes including fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall and fixing with clips of approved quality and number, filling the joints using rubber gasket with solvent cement and properly resting the shoe of pipes on cement concrete or masonry blocks, including necessary scaffolding and maintenance for 3 years for any leakages or dislocation of pipes. 150/160 mm NB
Providing and Replacement of broken FRP Sheet 2mm/3mm thick in roofs and side cladding with necessary GI Hooks Nuts & Bolts Washers etc all complete.(as and when required basis) Note: Rates should be inclusive of take away damage FRP Sheets from MDL premises to Municiple dumping ground.
Providing and fixing precoated galvanised iron profile sheets of JSW, Jindal, Tata Manufacturer (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per Sq.M. as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
Removing existing broken/damaged north light glasses and providing and fixing with 2 mm thick polycarbonate translucent sheet with Aluminium casing; all complete.
Providing and fixing of 2mm thick Polycarbonate Translucent Sheets for roof, North Light and Cladding etc. to match with existing profile of galvalume roofing sheets including lapping, transportation, labour, wastage complete with hardwares, etc. all complete. ((Covered area of sheeting as fixed in position will be measured)
Labour Charges for Dismantling or Fixing carefully AC /Gl roofing sheets, Polycarbonate sheets, U cladding/North light glasses including ridges, hips, valleys, gutters, coal tar etc. and stacking the serviceable materials within 100 m lead including necessary screws and washers all complete as directed. (Sheets will be provided by MDL for fixing) Note: Rates should be inclusive of take away unserviceable material from MDL premises to Municiple dumping ground.
Providing and erecting bamboo's double scaffolding upto Ten story height/40mt and width and strength by sides of building for platform to enable departmental workmen to carry out repairs to building at any level from ground to any floor height as directed including removing the same and clearing the site. ( The rate for this item will be applicable for work beyond 10 m height for building / shed / workshop since all the items of work are inclusive of scaffolding upto 10 M height) including suitable safety nets and covering.
Water proofing of joint roof floor using Roff Rainbow Tile mate Epoxy (Three Component epoxide resin based ceramic tile joint filler), as follows : 1. Tile Joints to be opened and cleaned to remove any loose particles 2. The 3 components of the Roff Rainbow Tilemate Epoxy shall be mixed in required proportions as per the manufacturers specifications 3. The grout shall then be filled into the opened joints ensuring that they are completely filled. 4. The surplus grout shall be cleaned from the tile joint surface with-in 10-15 minutes, using initially, a rough textures sponge dampened with clean water. 5. Any light residue left shall be cleaned off using a sponge and cleaner. II) Providing and Application of Dr.Fixit New Coat Water Proofing as per manufacturers specifications, as follows: 1. Application of primer, 2 parts of Dr. Fixit Prime Seal mixed with 1 part water, and applied to the surface in 1 coat. This dilution will cover approxately 7sq M. Allow to dry for 6 to 8 hours. 2. First coat of Dr. Fixit New Coat is to be applied undiluted over the primed surface. While the first coat is wet, a fibre mesh is to be embedded into the coat. The fibre mesh improves the performance of the coating, to take care of movement in cracks caused due to variations in temperature etc. Allow 6 to 8 hours to dry, depending on ambient conditions. 3. After the first coat is dry, apply the second coat, and wait for 6 to 8 hours to dry, depending on ambient conditions. 4. After the second coat is dry, apply the third coat and wait for 6 to 8 hours to dry, depending on ambient conditions. 5. After application of the third coat, leave to air cure for 7 days. etc. complete with 5 years guarantee.
Water proofing of Tile Joints on the parapet wall: Repairing of joint tiles using Roff Rainbow Tilemate Epoxy (Three Component epoxide resin based ceramic tile joint filler), as follows : 1. Tile Joints to be opened and cleaned to remove any loose particles 2. The 3 components of the Roff Rainbow Tilemate Epoxy shall be mixed in required proportions as per the manufacturers specifications 3. The grout shall then be filled into the opened joints ensuring that they are completely filled. 4. The surplus grout shall be cleaned from the tile joint surface with-in 10-15 minutes, using initially, a rough textures sponge dampened with clean water. 5. Any light residue left shall be cleaned off using a sponge and cleaner. etc. Complete with 5 years guarantee.
Dismantling the existing damaged, corroded G.I sheets outside cladding rows on either side of sheds as per IS standard IS -277, CM/L-7395286. Providing corrugated G.I. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. including all arrangements for dismantling the existing sheets.(As & when required basis).Original delivery challan bill for supply of GI sheet with original manufacture test certificate of GI sheets to be produced with thickness measurement .GI sheet to have stamping of reference of test certificate no. 0.80 mm thick with zinc coating not less than 275 gm/m²
Supply and applying M-Seal Chemical or bituminous sealing sheets having one side aluminium foil of size 50x50mm size for sealing holes as directed.
Providing and fixing 15cm wide, 45cm overall semi circular plain GS sheet gutter with iron brackets 40x3mm size, including bending, cutting, lding, hoisting, fixing in position with bolts, nuts and washers etc. and making necessary connections with rain water pipes complete -- 0.8mm thick with zinc coating not less than 275 gm/m2
Providing and fixing of Cup and elbow MS section gutter including primer and oil paint/aluminium paint.
Providing and Fixing GI jali of size 50 x 50mm and 3 mm thick alongwith accessories in work shops. Providing and fixing G.I. wire of dia. 4 mm, PVC coated fabric to achieve outer dia not less than 5 mm in required colour and shade of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers and 25x5mm MS flat patti framing to protect below polycarbonate sheets or other locations as required complete as per the direction of Engineer-in-charge.
Providing and fitment of central ride for roof. Providing and fitment of central ridege for roof, providing and fitment with necessary bolts, nuts etc. All complete
Providing roof gutter of 16 gauge G.I. sheet , 10 inch width x 6 inch depth with required supporting structures and angel support as required.
Providing of unskilled labor for cleaning of choked rain water open drain on running length basis
Removing Of Existing damaged galvalum color coded sheets. Providing and fixing new sheets. Providing and fixing new sheets with required fastners(max. Hight of shed is 18 mtr)
Removing existing broken/damaged north light glasses and providing and fixing new 5mm/6mm thick plain polycarbonate sheet neatly secured to glazing frame etc; all complete including scaffoldings. Note: Rates should be insclusive of take away damage glass sheets from MDL premises to municipal dumping ground.
Dismantling carefully existing broken damaged A.C. sheets from roof, side cladding, gable end etc, providing and fixing new 3mm polycabonate sheets with necessary fixtures screws and bolts all complete.
Providing roof gutter of 3 mm thick G.I sheet, 22 inch width x 9 inch depth with required supporting structures and angel support as required. for c/s details refer drawing. Removal of old roof gutter and fitment of new with rivetted joints complete is in contractor's scope.
Dismantling Asbestos Sheet roofing including ridges, hips, valleys and gutter and stacking the serviceable materials within 50m lead and disposal of un-serviceable material outside MDL premises at Municipal Dumping ground
Fixing ridges or hips of width 60 cm overall width plain G.S/G.I/ Galvalume sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete.
Fixing valleys of 90 cm wide overall in plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete.
Providing and Fixing approved fibre glass roof sheet (clear area of the ventilated portion shall be paid without taking the laps into account), complete as per manufacturer's specifications, thickness of sheet 1.2 mm.
Providing and fixing Plain Coloured Fibre Glass corrugated roof sheet 2mm thick for weather shed 0.75 wide using 40mm X 40mm X 5mm M.S. Angle as brackets and purlin of size 25mm X 25mm X 5mm with painting and cement vata etc. complete.
Providing & fixing 6mm thk Polycarbonate sheets hallow brick type in chajja including hardware 8mm dia G.I bolts & nuts, G.I plain & bitumin washers, making waterproof vata etc. complete as directed. (Refer TS36)
Providing and fixing 3 mm thick translucent corrugated Fibre Glass Reinforced Polyester (FRP) Sheeting profile to match with sheeting including fixing in sloping roof with G.I. 'J' or 'L' hook bolts, G.I. Square nuts, 25mm dia x 1.59mm thick flat washers, 25mm dia x 3.18mm thick bitumen washers, necessary lapping etc at all heights. The area of FRP sheeting including Laping as fixed in position will be measured. Rates shall include all fixtures and fastenings.
Dismantling GI/Galvalume Sheet roofing upto 10mm thick including ridges, hips, valleys and gutter and stacking the serviceable materials within MDL premises and disposal of un-serviceable material outside MDL premises at Municipal Dumping ground etc complete as directed.
Providing and fixing 80cm overall trapezoidal 2mm thick Aluminium gutter as per existing gutter section, with MS (GI) brackets 40x5mm/50x5mm size, including bending, cutting, welding, hoisting, fixing in position with bolts, nuts and washers etc. all complete as directed.
Design, Supply & Fixing of GI Colour Coated Accessories of 0.70 mm TCT of suitable required size, shape ie Ridges, North light curves, Apron Flashing, Gable end Flashing, Corner pieces, Eaves Flashing, with complete hardware including overlap, wastage etc. complete. Material specification is same as per Roofing Sheets
Providing and fixing Structural steel work riveted, bolted or welded in built up sections, trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer complete as directed by engineer.
Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineerin- charge. The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding.
Fixing corrugated G.S./G.I/Galvalume sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), including cutting to size and shape wherever required.
Providing and fixing precoated galvanised steel sheet roofing accessories 050mm (+0.05%) total coated thickness, Zinc coating 120 grams per sqm as per IS:277, in 240 mpa steel grade,5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/self tapping screws complete. Ridges plain (500 - 600mm)
Providing and fixing precoated galvanised steel sheet roofing accessories 050mm (+0.05%) total coated thickness, Zinc coating 120 grams per sqm as per IS:277, in 240 mpa steel grade,5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/self tapping screws complete. Flashings/ Aprons.( Upto 600 mm)
Providing and fixing precoated galvanised steel sheet roofing accessories 050mm (+0.05%) total coated thickness, Zinc coating 120 grams per sqm as per IS:277, in 240 mpa steel grade,5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/self tapping screws complete. North light curves
Providing and fixing precoated galvanised steel sheet roofing accessories 050mm (+0.05%) total coated thickness, Zinc coating 120 grams per sqm as per IS:277, in 240 mpa steel grade,5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/self tapping screws complete. Barge board (Upto 300 mm)
Providing and fixing precoated galvanised steel sheet roofing accessories 050mm (+0.05%) total coated thickness, Zinc coating 120 grams per sqm as per IS:277, in 240 mpa steel grade,5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/self tapping screws complete. Crimp curve
Providing and fixing precoated galvanised steel sheet roofing accessories 050mm (+0.05%) total coated thickness, Zinc coating 120 grams per sqm as per IS:277, in 240 mpa steel grade,5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/self tapping screws complete. Gutter .(600 mm over all girth)
NALIN P SHAH
ROY INFRA AND DEVELOPERS
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .