Provision of Parking sheds for Type-III and IV quarters in OFMK

Amount

Surface Excavation : Surface excavation in soft/loose soil n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out

Removal : Removing excavated material(soils) exc. 250m but n.exc 500m and depositing where directed.

Moorum : Supply and filling of Moorum/Red Bajri, filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.

PCC : (M&L) - Plain Cement concrete (1:4:8), type D2 with 40 mm graded aggregate, in foundation, filling and mass concrete complete all as specified.

PCC : Cement concrete type B-1, 1:2:4 (20mm graded aggregate, 55 mm thk in floors/pavings etc. Complete all as specified.

Reinforcement : Mild steel(TMT) bars 6-8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips .

Galvalume Sheet : Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified Make: JSW/Essar/Tata

Structural Steel : Rolled mild steel of grade Fe 410 -W (GdeE- 250) qualityA in Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated)

Enamel Paint : Enamel paint to steel surfaces of any description, not otherwise descri-bed, over 10cm width or girth with synthetic enamel ordinary tint 1 coats Make: Asian Paints/ Berger/ Shalimar

Writing Letters : Writing letters or figures (Block. Roman, Italic or Indian) n exc. 30 cm high (5 cm height of each letter) with synthetic enamel paint

Whitewash: Whitewash to walls on new undecorated plastered surface with two coats.

Brickwork : Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:6

Plastering : Rendering 10 mm thick cement plaster 1:6 on fair faces of brickwork or concrete surfaces.

SATYA SAI PROJECTS (BID ID -714963)

N J R CONSTRUCTIONS PRIVATE LIMITED (BID ID -717658)

SABAVATH SUJEEET (BID ID -717625)

ARKA PROJECTS (BID ID -717252)

SRI MARUTHI SC BC NTPC LO LCCS LTD (BID ID -714719)

KATKURI UPENDER REDDY (BID ID -714945)