Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹48,488.53Accepted-AOC | ₹48,488.53 | L1 | Accepted-AOC L1 |
| 2 | L2₹52,686.20+₹4,197.67 (8.66%)Rejected-AOC NADUPILAKAL VADIKKETH CHOTHAYIL ROAD THODIYOOR | KANNUR | KERALA | 670511 | ₹52,686.20+₹4,197.67 (8.66%) | L2 | Rejected-AOC L2 |
| Sl No | Description | Qty | Unit | AZEEZKUTTY L1 | JOSE GEORGE L2 |
|---|---|---|---|---|---|
| 1.00Roofing | |||||
| 1.00 | OD482196/2025-2026:Suppying and fixing150mm dia PVC rain water gutter semicircular section including fitting with 32X5mm MS flat supporters at 1m interval etc.complete. | 24.4 | metre | 435.68 ₹10,630.59 Lowest | 500 ₹12,200 |
| 1.00 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 0.26 | cum | 9,235.97 ₹2,364.41 Lowest | 9,300 ₹2,380.8 |
| 1.00 | 50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 51.84 | kg | 230.93 ₹11,971.41 Lowest | 250 ₹12,960 |
| 1.00 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 72.81 | kg | 187.05 ₹13,618.55 Lowest | 200 ₹14,561.4 |
| 1.00 | 12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 11.76 | sqm | 842.14 ₹9,903.57 Lowest | 900 ₹10,584 |
Tender Value
₹48,489
EMD Value
₹1,212
Closing Date
16 Mar 2026, 6:00 pmClosed
ASSISTANT ENGINEER
Assistant Engineer Thazhava Grama Panchayath
Annual Plan Thazhava GP Pr no 346 2025 26 Completion of Roofing work at Anganwadi no98
2026_LSGD_843977_1
8/AE/LSGD/TGP/202-26
Open Tender
Civil Works - Buildings
Item Rate
180 days
Thazhava
Please refer Tender documents.
4 documents required · 4 mandatory
₹335
₹1,212
Yes
11 Aug 2026
9 Mar 2026
18 Mar 2026
9 Mar 2026
16 Mar 2026
9 Mar 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Roofing | |||||
| 1.001 | OD482196/2025-2026:Suppying and fixing150mm dia PVC rain water gutter semicircular section including fitting with 32X5mm MS flat supporters at 1m interval etc.complete. | 1 | metre | - | - |
| 1.002 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | - | cum | - | - |
| 1.003 | 50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | - | kg | - | - |
| 1.004 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 0.8 | kg | - | - |
| 1.005 | 12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 1 | sqm | - | - |
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1424795.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.20 MB
aff.pdf
Tender Documents • 1.21 MB
BOQ_1424795.xls
BOQ • 0.30 MB
viewsbd.pdf
Tender Documents • 1.82 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .