Annual repair and maintenance Contract for Zones 7, 8, 9 and 10 of IIT Kanpur

Manpower

Facility manager Grade 1

Facility manager Grade 2

Supervisor (Skilled)

Multi skilled worker(Skilled)

Plumber (Skilled)

Carpenter (Skilled)

Mason (Skilled)

Welder (Skilled)

Electrician (Skilled)

Semi-Skilled Worker

Helper (UnSkilled)

Consumable Material (Civil)

Al-Curtain Rod(Pipe) Dia 20 mm length 3600 mm

Al-Bracket 'L' Type 20 mm dia

Al-Bracket 'T' Type 20 mm

Al-Tower bolt 200 × 10 mm

Al-Tower bolt 150 × 10 mm

Al-Tower bolt 100 × 10 mm

Al- door handle 100 x10 mm

Al-Door handle 125 mm

Al-Rubber door stopper (Double)

Brass Door Stopper (Single Leg)

Aluminium door floor spring

Aluminium door hasp and staple 125mm

Al-Hasp & Staple 115 mm

Aluminium window handle (L/R)

Al-window SS friction stay 250 mm

Al-window SS friction stay 350 mm

Al-door seal with rubber or brush 3 ' long

Al-Sliding door bolt 300 × 16 mm

Al-Sliding door bolt 250 × 16 mm

Al-door seal with rubber or brush 4 ' long

GM/Brass Gate valve 20 mm

Brass Gate valve 15 mm

GM/Brass Gate valve 25 mm

Brass gate valve 32 mm

GM/Brass Gate valve 40 mm

Brass Bib Cock 15 mm

Brass Ball Cock 20 mm

Brass Ball Cock 25 mm

Brass Ball Cock 32 mm

Brass Ball Cock 15 mm

Brass Ball Valve 20 mm

Brass Rod for Ball Cock 15 mm

Brass Phase for Stop Cock(Pillar Cock) 15 mm

Brass Mortice Latch & Lock 100 × 65 mm

Brass Stop Cock 15 mm

Brass Sliding door bolt 250 x 16 mm

Brass Tower Blot 250 x 10 mm

Brass Spendle for Consealed Stop Cock 15 mm

CP Bib Cock (Short Body) 15 mm

CP Bib Cock (Long Body) 15 mm

CP pillar Cock 15 mm

CP Angle Valve 15 mm

CP Grating 125 mm

CP Grating with hole cutting 125 mm

CP Hand shower with connection(Health Faucet)

CP Jet Connection with Jet

CP Extension piece 15 × 50 mm

CP Extention piece 15 × 75 mm

CP Flange 15 mm

Flush valve for W.C 40 mm (Consealed type) jaguar Make 1093

CP Toilet paper holder

C.P/Brass Towel Rail (600 X 20) mm

Commercial Ply 4 mm (2.44 ×1.22)mt

Commercial Ply 6 mm (2.44 ×1.22)mt

Commercial Ply 12 mm (2.44 ×1.22)mt

Commercial Ply Board 19 mm (2.44 × 1.22)mt

CP Nozal Cock 15 mm

CP Swan neck piller cock 15 mm

CP Swan neck three way 15 mm

CP waste Full thread 50 mm

CP Waste 32 mm Fullthread

CP Bottel trap 32 mm

CP Hand Shower Chain / 1.5 mtr Lead

CP Soap Dish 100 mm

CP Two way angle valve 15 mm

C.P Brass Push Cock for Urinal 15 mm

CI Bib Cock 15 mm

CP Coat pin hanger (two pin)

CP Adapter 20 mm

Bond tite [360 gram]

Door Closer

Drill bit (4.0 mm)

Drill bit (10 mm )

Drill bit (3 mm )

Drill bit 6.5 mm for hammer drill

Drill bit 6.5 mm

Drill bit 25 mm for hammer drill

Drill bit (16 mm )

Drill bit (12 mm )

Electric welding rod (90 Electrodes in pkt)

Fevicol 5 KG (Pack)

GI Pipe 32 mm

GI Pipe 25 mm

GI Pipe 20 mm

GI Pipe 15 mm

GI Pipe 40 mm

GI Pipe 50 mm

Fastner with washer ( 10x100) mm

GI Socket 32 mm

GI Socket 25 mm

GI Socket 20 mm

GI Socket 15 mm

GI Socket 40 mm

GI Reduser Socket 25 × 15 mm

GI Reducer Socket 20 × 15 mm

GI Reduser Socket 25 × 20 mm

GI Reduser Socket 32 × 25 mm

GI Reducer Socket 40 × 25 mm

GI Elbow 32 mm

GI Elbow 25 mm

GI Elbow 20 mm

GI elbow 15 mm

GI elbow 40 mm

GI elbow 50 mm

GI Reducer Elbow 25 × 20 mm

GI Reduser Elbow 20 × 15 mm

GI Reduser Elbow 40 × 32 mm

GI Reduser Elbow 40 × 25 mm

GI Reduser Elbow 32 × 20 mm

GI Tee 32 mm

GI Tee 25 mm

GI Tee 20 mm

GI Tee 15 mm

GI Tee 40 mm

GI Reducer Tee 20 × 15 mm

GI Union 32 mm

GI Union 25 mm

GI union 20 mm

GI union 15 mm

GI Union 50 mm

GI Union 40 mm

GI Nipple 20 × 150 mm

GI Nipple 20 × 100 mm

GI Nipple 20 × 75 mm

GI Nipple 20 × 50 mm

GI Nipple 15 × 150 mm

GI Nipple 15 × 100 mm

GI Nipple 15 × 75 mm

GI Nipple 32 × 150 mm

GI Nipple 32 × 100 mm

GI Nipple 32 × 75 mm

GI Nipple 25 × 150 mm

GI Nipple 25 × 100 mm

GI Nipple 25 × 75 mm

GI Nipple 25 × 50 mm

GI Nipple 15 × 50 mm

GI Nipple 50 × 100 mm

GI Nipple 50 × 150 mm

GI Nipple 40 × 100 mm

GI Nipple 40 × 150 mm

GI Hexa Nipple 20 mm

GI Hexa Nipple 15 mm

GI Long 25 × 150 mm

GI Long 20 × 150 mm

GI Long 15 × 150 mm

GI Long 32 × 150 mm

GI Long 50 × 150 mm

GI Long 40 × 150 mm

Glass Plain 4 mm (6' × 4')

Glass Plain 5 mm (6' × 4')

Glass looking mirror 600 × 450 mm

Glass Frosted 4 mm (6' × 4')

Glass putty

GI Plug 25 mm

GI Plug 20 mm

GI Plug 15 mm

GI Plug 40 mm

GI Plug 50 mm

GI Plug 32 mm

Glass rubber beeding ( black )

Iron Hexa Blade (12" × 1")

Iron sliding door bolt 250 × 16 mm

Iron sliding door bolt 300 × 16 mm

Nut bolt for sliding door (6 × 50) mm (100 in pkt)

Iron But Hing 125 mm

Iron But Hing 100 mm

Iron But Hing 75 mm

Iron Tower bolt 200 × 10 mm

Iron Tower bolt 150 × 10 mm

Iron Tower bolt 100 × 10 mm

Iron door handle 125 mm

Iron door handle 100 mm

Iron Eye hook 100 mm

Iron Magic Eye

Iron kunda for sliding door bolt

Iron window handle L/R

Iron door spring (Helical)

Iron cutter blade ( 100 mm dia)

Iron Nut And Bolt For Sliding Door Bolt

Iron Haps & Staple 115 mm

PVC Bib cock 15 mm

PVC waste pipe 50 mm

PVC waste pipe 32 mm

PVC waste pipe 40 mm

PVC Connection 15 × 450 mm

Stainless Steel Wire mesh (4' width)

WC China Sink 600 × 450 × 300 mm

Oil Bound Distemper (5 Kg Pack)

Jk white cement based wall putty 5 kg Pack

White Cement (1 Kg Pack)

C.P brass Spreader

WC Orissa Pan Seat 580 × 440 mm

Wash basin 550 × 400 mm

WC Wash basin (Oval) over the top 550 x 480

WG EWC Seat 'S' type (Commode)

EWC pvc Seat cover

PVC Flushing Cistern 10 Ltr

PVC Cistern fitting 10 Ltr

Enamel Paint (Any Colour)

PVC Bend (Long)

PVC Urinal Flexible pipe 32 × 150 mm

PVC Ball for Ball cock 15/20 mm

PVC Door Silencer 50 mm

Lime for white wash 1kg

Marble cutter blade ( 100 mm dia)

Marble moulding blade ( 100 mm dia)

Iron cutter Blade 100 mm

Wood cutter blade ( 100 mm dia)

Tarpin oil

PVC syphan washer

WC China Sink 450 × 300 × 150 mm

Parliamentory Hinges

Piano hinges

PVC. Seat Cover Nob (E.EC)

Sand paper

Silicon/Silicon tube

Silicon Gun

Steel Hinges (75 mm )

Sulation for PVC pipe (100 gram)

Hand soap dispenser

S.S hinge 100 mm (4 in pkt)

PVC gulli (100 in pkt)

GI Check nut 15 mm

GI Check nut 20 mm

CEMENT CONCRETE (CAST IN SITU)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work at all level :

1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work at all level :

1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded bricks aggregate 40 mm nominal size derived from natural sources)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work at all level :

1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded bricks aggregate 40 mm nominal size derived from natural sources) with available bricks

MASONRY WORK

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in all level in all shapes and sizes in :

Cement mortar 1:6 (1 cement : 6 coarse sand)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in all level in all shapes and sizes in :

Cement mortar 1:6 (1 cement : 6 coarse sand) with available bricks

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in all level in all shapes and sizes in :

Cement mortar 1:4 (1 cement :4 coarse sand)

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in all level in all shapes and sizes in :

Cement mortar 1:4 (1 cement :4 coarse sand) with available bricks

CLADDING WORK

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

WOOD AND P. V. C. WORK

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).

Sal wood

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.

Second class teak wood

35 mm thick

Providing and fixing wire gauge shutters using stainless steel grade 304 wire gauge with wire of dia 0.5 mm and average width of aperture 1.4 mm in both directions for doors, windows and clerestory windows with necessary screws :

35 mm thick shutters

with ISI marked M.S. pressed butt hinges bright finished of required size

Second class teak wood

FLOORING

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.

FINISHING

Neat cement punning.

Pointing on brick work or brick flooring with cement mortar 1:3 (1 cement : 3 fine sand):

Flush / Ruled/ Struck or weathered pointing

REPAIRS TO BUILDING

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineerin-Charge.

With cement mortar 1:4 (1cement: 4 coarse sand)

NEW TECHNOLOGIES AND MATERIALS

Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer-In-charge complete in all respect.

SBR Polymer (@10% of cement weight) modified cementitious bond coat @ 2.2 kg cement per sqm of surface area mixed with specified proportion of approved polymer

Providing, mixing and applying SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of Engineer-in-charge.

25 mm average thickness in 2 layers.

Providing, mixing and applying SBR polymer (of approved make @ minimum 2% by wt. of cement used) modified plain/reinforced cement concrete for structural members having minimum characteristic compressive strength [with ordinary portland cement, coarse sand and graded stone aggregate of 10mm maximum size in proportion as per design criteria] with specified average thickness.

50mm thick in Grade M 25 with cement content not less than 330 kg per cum

Supplying of ready mixed micro concrete (in pack 25 kg) of make: Rederoc RG (Non-shrink, cementitious micro-concrete).

Fencing with angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire weighing 9.38 kg per 100 m (minimum), between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete. (Cost of posts, struts, earth work and concrete work to be paid for separately). Payment to be made per metre cost of total length of barbed wire used.

With G.I. barbed wire

Supplying at site Angle iron post & strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc. comple

Consumable Material (Electrical)

Supplying of following piano type switch/ socket complete etc. as required.

5/6 amp One way Switch

5/6 amp Two way Switch

3 pin 5/6 amp socket outlet

15/16 amp switch

6 pin 15/16 amp socket outlet

Fan Regulator socket type

Telephone socket/ jack outlet

6A, Bell push switch (Call bell push)

Supplying of following modular switch/ socket complete etc. as required.

5/6 amp switch (1 Way, 1 Module)

2 way 5/6 amp switch (2 Way, 1 Module)

3 pin 5/6 amp socket outlet (Socket shuttered 6A, 2/3 pin, Universal India 2 Module)

15/16 amp switch (1 Way, 1 Module)

6 pin 15/16 amp socket outlet (Socket shuttered 6/16A, 3 pin, India 2 Module)

Fan Regulator socket type (Fan step regulator 100 Watts, 2 Module)

Telephone socket outlet (Telephone Socket RJ11 with Shutter, 1 Module )

Bell push, 6A, 1 way, 1 Module

Blanking Plate (1 Module Blank)

Supply of modular base & cover plate complete as required.

White plate 2 Module

White plate 3 Module

White plate 4 Module

White plate 6 Module

White plate 8 Module

12 module (White plate 2x6 Module)

Supplying of following capacity capacitor suitable for ceiling fan etc.

Supplying of 20 / 40 W, 220 V starter for FL. Tube fitting complete as reqd.

Supplying of 18W/28W electronics ballast , 240V Fl. Lamp complete as reqd.

Supplying of brass batten/ angle holder complete etc. as required (6 A, brass batten/ angle holder )

Supplying of Ceiling rose (6A, Pilot 3 Plate)

Supply of PVC tape roll

Supplying of 6 watt LED Slim recess cum surface LED panel as complete as required.

Supplying of 12 watt LED Slim recess cum surface LED panel as complete as required.

Supplying of following LED / lamps in existing fitting as complete as required.

LED Bulbs 10watt

Supply of LED Tube 20 Watt

Supply of 100 Watt Bulb

Supplying of 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete as required.

Single pole 6 Amp (SP,6 Amp, C Curve)

Single pole 10 Amp (SP,10 Amp, C Curve)

Single pole 16 Amp (SP, 16 Amp, C Curve)

Single pole 20 Amp (SP, 20Amp, C Curve)

Single pole 32 Amp (SP, 32 Amp, C Curve)

Double pole 32 Amp (DP,32 Amp, C Curve)

Four pole 32 Amp (FP, 32 Amp, C Curve)

Supplying of 40 to 63 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete as required.

Single pole 40 Amp (SP,40 Amp, C Curve)

Single pole 63 Amp (SP,63 Amp, C Curve)

Supplying of 40 to 63 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete as required.

Double pole 40 Amp (DP,40 Amp, C Curve)

Double pole 63 Amp B(DP,63 Amp, C Curve)

Four pole 63 Amp

Supplying of following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 300 mA in the existing MCB DB complete as required.

DP,40 Amp, RCCB

DP,63 Amp, RCCB

Supplying of following rating 3 pin Plug top Complete as required.

Supply of 5/6 amps, plug top ISI marked

Supply of 15/16 amps, plug top ISI marked

Industrial/Metallic top (20 Amp)

Industrial Socket (20 Amp)

Supplying of FRLS PVC insulated flexible copper conductor cable.

1x2.5sqmm

1x1.5sqmm

1x4sqmm

3x2.5sqmm (3 core round conductor)

3x4sqmm (3 core round conductor)

3x1.5sqmm (3 core round conductor)

Supply of 400mm sweep AC 230/250 volts, 50 Hz wall mounting revolving fan with brackets etc compete.

Supply of AC ceiling fan of following sweep 220 volts without regulator i/c wiring the down rods of standard length up to 30 cm with 1.5 sq.mm.

Overhauling of celing fan of any size including dismantling and refixing of fan, bearing, checking, cleaning the all parts and supplying & replacement of rubber real, rubber ring, nut bolts, hanger clamps, bearing plates, cotter/split pin, varnish if required etc. as required complete (Excluding Manpower)

Rewinding of ceiling fans of any size i/c dismantling of rotor cutting the damaged winding and providing rewinding along with insulation paper, varnish, connecting copper leads of suitable quality including dismentling and refixing from normal/abnormal height and refixing as required (Excluding Manpower)

Rewinding of exhaust fans of any size i/c dismantling cutting the damaged winding and providing rewinding along with insulation paper, varnish, connecting copper leads of suitable quality including dismentling and refixing from normal/abnormal height and refixing as required (Excluding Manpower)

Overhauling of exhaust fan of any size including dismantling and refixing of fan, bearing, checking, cleaning the all parts and supplying & replacement of rubber real, rubber ring, nut bolts, hanger clamps, bearing plates, cotter/split pin, varnish if required etc. as required complete (Excluding Manpower)

Cleaning of ceiling fan/wall fan/Exhaust fan with detergent at site (Excluding Manpower)

Hand gloves Rubber

Duster

Material required having life of 12 months

Foldable Multipurpose Aluminium Super Ladder for Home and Industrial Purpose (12 Feet)

Emergency Rechargeable LED Torch Light.

Safety Shoe