Providing and fixing of new gate repair renovation including bed treatment stone masonry lining wall greasing oiling of sluice on right of River Jhelum from Sempora to Sonwar

Earth work in excavation by mechanical means (hydraulic excavator), over areas exceeding 30 cm in depth, 1.5 m in width as well as 10 m² on plan, including dressing of sides and ramming of bottoms, disposal of excavated earth with a lead up to 50 m and lift up to 1.5 m, as directed by the Engineer-in-Charge.

Dumping stone excl. cost of stones in horizontal on level.

Supply of stone boulders

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Providing and laying in position Reinforced cement concrete of specified grade including curing but excluding the cost of centring, shuttering,finishing and reinforcement. All work upto plinth level with: 1:2:4 Mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including dewatering wherever required, complete as directed by the Engineer-in-Charge.

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more.

Centering & shuttering incl. strutting, propping etc. & removal of form work for:- Foundations, footings, bases for columns

Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.

Removing and refixing of existing sluice gate by lifting through truck-mounted hydraulic crane or any mechanical means, including disconnection and reconnection of operating mechanism, complete as directed by Engineer-in-Charge.

Structural steel work in built-up sections for sluice gate regulators, including cutting, welding, erection, priming coat and two coats of approved colour paint, complete as directed by Engineer-in-Charge.

Supply, installation, and commissioning of manually driven Single winch machine assembly with threaded shaft for vertical operation of a 5kN gate, including winch base, connecting rod, threaded shaft, flanges, rain cover, and all necessary accessories, complete as per specifications and directions of the Engineer-in-Charge, inclusive of carriage and transportation up to site of work.

Repair to existing manually operated winch machine, including dismantling, rectification/replacement of worn-out parts, welding and machining wherever required, reassembly, lubrication/greasing, alignment, complete as directed by the Engineer-in-Charge.

Providing and fixing Flat Bottom Rubber Seal, including supplying the seal, drilling holes, and fixing it firmly to the gate frame using Counter Sunk Hex Head Bolts with nuts and washers, complete in all respects.

Providing and fixing Teflon-Cladded Hollow Side Seal, Dia 30 × 70 mm, 10 mm thick, fixed on both sides of the gate using counter-sunk bolts

12mm Cement plaster of mix in 1 : 4 Mix ( 1 cement : 4 fine sand)

Demolishing R.C.C. work manually/by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge.

Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with Cement mortar 1:6 (1 Cement : 6 coarse sand).

Carriage of material by mechanical transport from different sources to road site including loading and unloading. 19.1) Stone Soling/Quarry Stones avg lead of 22 Kms.

40mm Aggregate for an average lead of 22 kms

20mm Aggregate for an average lead of 22 kms

Sand for an average lead of 22 kms

Cement for an average lead of 15 kms

Steel average lead of 20 km.