Construction of Aditional Room and Lavtory at Naibet office Chambgond

Earth work in excavation by Mechnical means in trenches for foundations drains, pipes,cablesetc. (not exceeding 1.5 m in width ) and for shafts ,wells , cesspits and the like not exceeding 10 sqm on plan depth up to 1.5 m including disposal of excavated earth up to 1 m from cutting edge disposal earth is to be leveled and neatly dressed in all kinds of soil.

Supplying/filling stone soling tightly hand packed under foundation trenches incld. all leads, lifts and all carriages 10 km upto site of work complete.

Providing and laying specified grade cement concrete 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size )Excl the cost of Centering/Shuttering.

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in beams, suspended floors,landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement-all work upto plinth level in 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size)

Reinforcement for RCC work incld. Straightening, cutting, bending, placing in position and binding all complete Thermo Mechanically Treated bars.

P/F of Centering & shuttering including strutting, propping etc. and removal of forms . For foundations , footings etc

P/F of Centering & shuttering including strutting, propping etc. and removal of forms . For suspended floor ROOFS INCUDING BALCONIES AND ACCESS PLATEFORM

P/F of Centering & shuttering including strutting, propping etc. and removal of forms . Lintes, beams

Brick work with common burnt clay F.P.S (non-modular ) bricks class designation 75 in foundation & plinth including superstructure above plinth level upto floor V level in cement mortar 1:6 (1 cement : 6 course sand)

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20mm nominal size stone aggregate.

12mm Cement plaster on the rough side of single or half brick wall of mix:1 : 6 ( 1 cement : 6 coarse sand)

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 1 mm thick

Finishing walls with Acrylic smooth exterior paint of required shade: Old work (two or more coats applied @ 1.67 liters/10sqm on existing cement paint surface)

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Imported wood

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. 35mm thick imported wood

P/F wire gauge shutters using galvanised MS Wire gauge of avg width for aperture 1.4 mm in both directions with wire of dia 0.63 mm for doors windows and clerestory M.S pressed butt hinges bright finished of required size with necessary screws, all complete as per direction of Engineer-in-charge.(imported Kail wood) 30mm thick incl cost of primer and painting two or more coats,incl the cost of panneling and glazing all complete.

Providing and fixing 35mm thick ISI marked flush door shutters non decorative type solid core of block board construction with frame of hard wood all around 20mm thick & well matches teak 3 ply veneering with vertical grains or corss bands & fface veneeres on both faces incld: bright finished ISI marked butt hinges with necesary screws (imported wood)

Providing & fixing of 4mm thick float glass in fixed panes with budloo wood beading of required width fixed with nails complete (Glass panes to be measure in fitted and finished form)

Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work

Providing 40x5mm flat Iron hold fast 50 Cm long incld: fixing to frame with 10mm diameter bolts, nuts and wooden plugs and embeddings in cement conc: block 30x10x15Cm 1:3:6 mix 1 Cement:3 coarse sand 6 graded stone agg: 20mm Nom: siz

Providing /fixing Hardware fittings of approved brand and manufacture as per directions of EIC

150mm Handles

125mm Handles

100mm Tower Bolts

150mm Tower bolts

L-Drop 8 Inch with link lock

Supplying/filling stone bouldersunder floors incld: ramming water etc incld: all carriages complete job

Carriage of material by mechanical transport incld: loading unloading etc complete

Stone agg; for an avg: lead of 7 Kms

Sand for an avg: lead of 15 Kms

Bricks for an avg lead of 7Kms