GER-38/2022-23 Special repairs to Bldg No T28 at Div Camp, Bldg No T93 and T24 TPS Barrack at DOU, T93 at 150 GH and T-69, T-70 and T-71 of 835 Fd wks Coy and certain Minor work at Rajouri under GE 862 EWS

Amount

Sch 'A' Part-I (B/R works) Dismantling of asbestos cement (corrugated, semi corrugated etc) sheets in roof covering complete all as specified and directed.

S&F for pre-painted galvalume aluminium zinc coated GI based corrugated steel 0.50mm thick of approved colour having tensile strength 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws including side and end lap as per manufacturer’s instructions complete all as specified and directed.

S&F for pre-painted galvalume aluminium zinc coated GI based plain steel 0.50mm thick of approved colour having tensile strength 550 MPa as in ridges, hips, valley gutters, fixed with self tapping screws including side and end lap as per manufacturer’s instructions complete all as specified and directed.

Dismantling of timber scantling 40 Sqcm and over in section, in any position as in unframed or framed work complete all as specified and directed.

M&L for rolled mild steel joist, channle, angle, or tee sections, fixed independently with or without connecting plates, cut to ordinary lengths i.e. within 20 mm of the length given complete all as specified and directed.

S&F for rolled section structural steel Roof trusses (framed), trussed, purlins, cranes gantries, , rails and fastening and heavy brackets framing (beam, tea, angle, channel or flat section) including distance pieces, cleats, etc. conforming to Fe-410-W (Gde - E-250) quality A complete all as specified and directed.

M&L for plates (plain or chequeed), channels, squares cut or notched (ordinary and cunter sunk) forming holes, without any attachment complete all as specified and directed.

S&F for mild steel screw bolts (machine made) with hexagonal or square head at one end and screwed the other with washers of length exc 5cm and n exc 10 cm and slote 6 to 20mm dia complete all as specified and directed.

M&L for preparation of new steel surface exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified.

M&L for 4mm thick designer cement fibre ceiling board in ceiling fixed with screw as per manufacturers instructions , laid over and including hot dipped galvanised iron in post grid with 24mm wide T section exposed flanges which shall be powder coated white. The frame work shall comprise of main runner made from 0.33 mm thick galvanised steel sheet of size 24 x 32 x 300 mm spaced at 12 mm centres securely fixed to the structural soffits by approved hangers at 1200mm maximum centres. Hangers of GI wire 4 mm dia to be fixed by approved rawl plug, level adjusters and screws etc. The last hanger at the end of each main runner shall not be greater than 450 mm from adjacent wall flush fittings of 1200 mm long screws Tee with (double stiching) to interlocked between main runners at 600 mm centre to centre from 1200 x 600 mm modules cross tee longer than 600 mm modules to be formed by fittings 600 mm long cross tee, tee perimeter wall angle shall be of 0.45 mm thick galvanised steel of size 19 x 19 mm and 300 mm long of white colour all as per insturctions including dismantling of existing board etc complete all as specified and directed.

Taking down cement plaster, any description on brick or stone or cement concrete surfaces including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar (1:4) on stone/brick masonry finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar (1:6) on stone/brick masonry finished even and smooth without using extra cement complete all as specified and directed.

Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed.

M&L for stone walling of random rubble masonry, uncoursed, well bonded, bedded and soilidly hearted, built in cement mortar (1:6), complete all as specified and directed.

M&L for Brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius, built in cement mortar (1:6) complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing rubbish off the premises complete all as specified and directed.

M&L for vitrified tiles light shade (premium quality) 10 mm thick (square/ rectangular) polished, area of each tiles exc 0.36 sqm but not exc 0.42 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface, laid over and including 15 mm thick screed bed in cement mortar (1:4) complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 350x250x7mm or 450x350x7mm thick, (premium quality) on vertical surface such as dado/skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including 10 mm thick backing layer of cement plaster in cement mortar (1:4) complete all as specified and as directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (premium quality) Square/rectangular, area of each tile exceeding 0.11 sqm but n.exc 0.18 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and as directed.

Taking down chowkhats or frames exc 1.5 Sqm and n.exc 4 Sqm each (without taking off shutters from the frames) and removing to store complete all as specified and directed.

Taking down chowkhats or frames (without taking off shutters from the frames) n.exc 1.5 Sqm each and removing to store complete all as specified and directed.

S&F for pressed steel door frame of size 125x60 mm with one or more rebates incl necessary fixing lugs, hinges, lock and strike plate etc including back filling to chowkhats in PCC (1:3:6) type C-0 using 12.5mm graded stone agregate complete all as specified and directed.

S&F for factory made 2nd class hard wood 35 mm thick plain framed panelled shutters (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (part-I) kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F for factory made 35 mm thick 2nd class hard wood glazed and skelton shutters open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkhats complete all as specified and directed.

S&F of steel windows factory made with side hung shutters including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded all as per IS-1038 complete all as specified and directed.

S&F of steel windows factory made with side hung shutters including box type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded all as per IS-1038 complete all as specified and directed.

M&L for block boards 18/19 mm thick Grade-II interior grade commercial type with decorative face veneer on both faces, fixed with screws including 6mm thick teak wood lipping as in cup boards complete all as specified and directed.

S&F for continuous (piano) hinges, mild steel, bright finish or electro galvanised, width of flap 30mm when open complete all as specified and directed.

S&F for 15 mm bore galvanised iron GI tubing medium grade with all fittings such as bends, socket, Tee, Elbow, union, Nipple, short pieces and fixed to walls, ceilings or laid in floors after taking down old unserviceable GI pipe of 15mm dia with all fittings etc complete all as specified and directed.

S&F for 20 mm bore galvanised iron GI tubing medium grade with all fittings such as bends, socket, Tee, Elbow, union, Nipple, short pieces and fixed to walls, ceilings or laid in floors after taking down old unserviceable GI pipe of 20mm dia with all fittings etc complete all as specified and directed.

S& F for stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperature 1.14mm and fixed with stainless steel wire staples complete all as specified and directed.

M&L for 4.0 mm thick sheet glass ordinary quality and glazing with oil putty and steel pins or wooden beads in squares not exceeding 0.50 square metre in each pane, complete all as specified and directed.

S&F for 100mm long butt hinges medium weight cold rolled mild steel complete all as specified and directed.

S&F for 150mm long aluminium anodized barrel tower bolts extruded section all as specified and directed.

S&F for 125 mm long extruded aluminium anodised handles fabricated type anodised complete all as specified and directed.

S&F for floor door stopper 140mm long of brass body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

M&L for 15mm dia bib tap cast copper alloy with crutch or butterfly handle, chromium plated, fancy type, screwed for iron pipe complete as in repair all as specified and directed.

S&F for stop valve (angle valve), cast copper alloy, screwed for high pressure with crutch or butterfly handle, screwed suitable for 15mm bore iron pipe or for union both ends complete all as specified and directed.

M&L for 20mm dia gun metal, gate/globe valve with iron wheel head screwed on both sides for iron pipes complete all as specified and directed.

S&F for 32mm dia waste coupling of brass chromium plated for glazed ware sinks, basin etc with long screwed shanks and fly nuts, flange and bedded in red lead cement mortar complete as in repair all as specified and directed.

S&F for 32mm dia waste coupling of PTMT (half or full threaded) (Minimum weight 32mm-45gms/40mm-60 gms) complete all as specified and directed.

S&F for Brass chromium plated tubular towel rail 20 mm dia "D" type 60 cm long between flange aluminium anodised complete all as specifed and directed.

S&F for Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms) complete all as specified and directed.

S&F for PVC connection 15 mm dia with PTMT nuts of length 600mm at both ends screwed for iron pipe of 15 mm bore complete all as specified and directed.

S&F for 450mm long CP brass connection pipe with CP brass nuts on both ends for fixing to pipe or other fittings complete all as specified and directed.

S&F for PVC waste pipe 32/40mm bore fixed to PTMT waste coupling for kitchen sink complete all as specifed and directed.

S&F for 20 mm dia ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

S&F for rotational moulded polythylene water storage tank (ISI marked) with float valve, plastic lid cover, multy-layered, cylindrical vertical with closed top, hoisted and fixed in position of capacity 1000 ltrs including dismantling old unserviceable tank and making connections inlcuding suitable GI wash out, over flow, nipple and including 20mm bore ball brass valve with union screwed for iron pipe and fixed complete all as specifed and directed.

M&L for Viterous china wash down water closet pan, white (pedestal pattern), including plastic water closet seat, black/white, closed pattern with recessed bottom and cover and mild steel chromium plated or aluminised hinging device, (excluding fixing bolts, flushing cistern and flush pipe) and inlcuding PVC pipe of superior quality complete all as specified and directed.

S&F for sink with drainage board made out of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in CM to dwarf wall or including fixing cantilever brackets and connecting union to pipe, over all size 915mm x 460mm, bowl size 410mm x 330mmx 160mm complete all as specified and directed.

S&F for 15 mm bore brass CP wash hand basin mixer hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S&F for 15mm bore brass CP sink mixer (Swan neck) for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S&F for 15mm bore brass chromium plated wall mixer fixed with shower rose and connecting to wall mixer complete as in repair all as specified and directed.

M&L for 50mm thick PCC type C-2, 1:3:6 (using 40mm graded stone aggregate) as in plinth protection, laid in slope 1:12 from outer edge of the wall, finished even and fair, laid in alternate bays including providing 6mm wide joints throughtout thickness of plinth protection in concrete bays and in between walling and plinth protection, joints filled mastic filling comprising of one part of heated bituminous 85/25 and 3 parts of sand( all by weight) complete after demolation of old cement concrete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of distemper oil emulsion over a coat of chalk whitening complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

M&L for preparation of new wooden surface exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Excavation in trenches, n.exc 1.5m wide and n.exc 1.5m depth for laying of cable and foundation of poles and stays and n. exc 10sqm on plan and getting out in soft/loose soil complete all as specified and as directed.

M&L for plain cement concrete type B-1 , 1:2:4 (using 20mm graded stone aggregate) as in benching, hold fasts, water troughs, bed block, surface channel and the like including weathering, slightly rounded or chamfered angles and throating including necessary form work complete all as specified and directed.

Removing of excavated material to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point all as specified and directed.

Returning, filling in trenches including spreading, leveling watering and well ramming in layers not exceeding 25 cm thick complete all as specified and as directed.

M&L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mi-tred/stopped ends etc complete all as specified and directed.

M&L for mild steel TMT bars 6mm to 8mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for precast cement concrete 1:2:4, type B1 as in landing, cover slab, chajjas etc and similar articles with plain faces set in cement mortar (1:6) complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nanital or similar pattern roof coverings complete all as specified and directed.

M&L for stone walling of random rubble masonry (except stones, using old unserviceable stone after cleaning), uncoursed, well bonded, bedded and soilidly hearted, built in cement mortar (1:6), complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floor and paving n exc 15 cm thickness below or above the ground level complete all as specified and directed.

M&L for 50mm thick PCC (1:4:8), type D-2 using 40mm graded stone aggregates as in sub base of floors and mass concrete etc complete all as specified and directed.

S&F for 300mm long aluminium alloy, anodised, sliding door bolt, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F for Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to Fe 290 grade E-1658 complete after dismantling of old unserviceble structural steel work all as specified and directed.

M&L for Machine cut kota stone slab(mirror polished) flooring 20-25mm thick in floors and jointed with grey cement slurry mixed with pigment to match the shade of the slab including machine cutting to make it square or rectangular, rubbing and cutting and polishing to achieve mirror finish, laid over and including screed bed or bedding layer of 20 mm thick in cement mortar (1:4) complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of colour wash ovar a coat of white wash complete all as specified and directed.

M&L for chequered cement concrete tiles of size 30 cmx 30cmx25 mm thick set, jointed in neat cement slurry in floor and pointed in white or coloured cement to match the shade of tiles laid over and including 20 mm thick screed bed in cement mortar (1:4) complete all as specified and as directed.

M&L for raised pointing to random or polygonal rubble, uncoursed or brought upto courses in cement mortar (1:4) complete all as specified and directed.

M&L for factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail : Panelling of plain colour PVC sheet to be fitted in the M. S . frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing mentioned in SSR Part-II 2010 complete all as specified and directed.

S&F for solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square complete all as specified and directed.

Dismantling of structural steel work including doors, gates but excluding framed trusses complete all as specified and directed

S&F for 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specifed and directed.

S&F for vitreous China water closet (squatt pan) Orrisa pattern 680x470 mm size pan, white, with front or back inlet with integral 'foot rests including provn of lime concrete bedding including connections to flushing cistern/pipe complete all as specified and directed.

S&F for PVC low level flushing cistern 10 ltrs capacity white with inlet ball valve, float valve and handle including providing & fixing MS angle iron brackets, PVC flush pipe complete all as specified and as directed.

M&L for 75mm dia PVC (SWR) bends complete all as specifed and directed.

M&L for 75mm dia PVC (SWR) pipes type 'B' single socketed in any length with rubber ring joints, laid in trenches or in floor, or as in weep hole complete all as specified and directed.

M&L for steel ventilators (factory made) with top hung shutter including hinges, steel peg stay complete all as specified and directed.

M&L for 110mm dia PVC (SWR) pipes type 'B' single socketed in any length with rubber ring joints, laid in trenches or in floor, or as in weep hole complete all as specified and directed.

M&L for plain cement concrete type B-1 , 1:2:4 ( using 20mm graded stone aggregate) as in coping including weathering, slightly rounded or chamfered angles and throating including necessary form work complete all as specified and directed.

Sch 'A' Part-II (E/M works) Taking down carefully copper/ aluminum point wiring (light, fan, socket or power) complete, including all fittings such as switches, ceiling roses, pendants, regulators sockets etc.) removing material from the site and making good the disturbed surfaces of walls, floor or ceiling etc. to match with existing specifications complete all as specified and directed.

M&L for point wiring for one light point/fan/bell/buzzer point controlled by one-one way switch with 1.5 Sqmm. (nominal area) single core FRLS,PVC insulated 1100 Volts, grade multi stranded unsheathed copper conductor unsheathed in and including non metalic rigid PVC casing & caping of 25mm width (Medium grade double locking system) complete with all acessories including PVC sunk box ISI marked for mounting of switches, sockets, fan regulator etc with 3 mm thick plastic laminated sheet as top cover, and 1.5 Sqmm. (nominal area) single core FRLS, PVC insulated 1100 Volts, grade multi stranded unsheathed copper conductor cable as earth wire upto common earth and connected to earth dolly including making good the diturbed surfaces compete all as specified and directed. (Note:- Three run of copper conductor of required size and one run of casing capping measured as one unit and also colour coding of wiring to be followed as red/yellow/blue for phase, black for neutral and green for earth)

Description all as per Serial item No 89 above but for one 5 pin 6 Amp socket outlet on independent board controlled by one 6 amp switch complete all as specified and directed.

Description all as per Serial item No 89 above but for one 5 pin 6 Amp socket outlet on same board controlled by one 6 amp switchcomplete all as specified and directed.

Description all as per Serial item No 89 above but for one 6 pin 16/6 Amp socket outlet independent with 2.5 sqmm PVC insulated FRLS multistraind copper cable with 2.5 sqmm single core multistraind FRLS copper cable as earthling lead complete all as specified and directed.

M&L for Switch piano, flush type single pole, one way 6 Amp, 240 volts complete all as specified and directed.

M&L for Socket outlet 2 in 1 , 3 pin 5 amp 230 volts flush type complete all as specified and directed.

M&L for switch outlet combination 2 in 1, 5 &15 Amp 230 volts flush type complete all as specified and directed.

M&L for Socket outlet 3 pin 5 amp 230 volts flush type complete all as specified and directed.

M&L for Ceiling fan regulator elctronic, stepped type, hum free suitable to control speed of fan from 0 to 100% rotary type five step 240 volts AC complete all as specified and directed.

M&L for Ceiling rose two to three terminal (65 x 50mm), PVC/ polycarbonate insulated body complete all as specified and directed.

S&f for bell push, flush type, 6 Amps complete all as specified and directed.

S&f for call bell AC, 230 volts single pole, ding done sound type complete all as specified and directed.

M&L for LED Tube light fitting, complete with 1x 20 watts, 220V, AC decorative box type with driver, holder in and including LED tube light connection complete prewired and connecting electrically to ceiling rose to fitting using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core and connector block etc and necessary fixing arrangement at any height complete as in repair all as specified and directed. (Make :- Havells cat No LHEXARP7SN1W020 or equivalent in Crompton/philips)

M&L for LED Tube light fitting, complete with 1x 10 watts, 220V, AC decorative box type with driver, holder in and including LED tube light connection complete prewired and connecting electrically to ceiling rose to fitting using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core and connector block etc and necessary fixing arrangement at any height complete as in repair all as specified and directed. (Make :- Havells cat No LUMILINEBS10WLED865SPCWH/ Crompton Greaves, Cat No LCTLN-10-CDL or equivalent of philips.

S&F for High efficacy 2'x2' recess LED flat panel light 36W LED 6000K edge-lit luminaire suitable for armstrong/grid ceiling complete for low ceiling applications complete with all accessories pre wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size (Make :-Havells, Cat part PLUTONEO02X2PLR34WLED840S or equivalant of Crompton Greaves /Philips)

S&F for environmental friendly, ultra modern, energy saving, surface mounted, decorative oval bulk head 10 watt 6000 K inbuilt LED luminaire comprising of high brightness LEDs, IP54 protection including connecting electrically using cord flexible 3 core PVC insulated over all sheathed with flexible copper conductor of size 0.75 sqmm complete as in repair all as specified and directed. (Make :- Havells Cat part No HEXAFT10WLED857SSYMBOPC/Crompton Greaves Cat No. LBHP-10-CDL or equivalant of Philips)

M&L for sheet metal enclosure MCB distribution board, double door single pole and neutral with IP-66 protection single phase 240 volts 12way, including suitable size copper bus bar and neutral link fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete as in repair all as specified and directed. (Note:- MCBs will be measured separately.)

M&L for MCB single pole, 240 volts any rating from 6 to 32 amps, 'C' series/curve with rupturing capacity 10 KA, including providing thimble for out going cablescomplete all as specified and directed.

M&L for MCB single pole & neutral 240 volts any rating 40 amps, 'C' series/curve with rupturing capacity 10 KA, including providing thimble for out going cablescomplete all as specified and directed.

Earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6 mm thick buried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of the earth plate at a depth not less than 1.5 mtr below ground level, earth plate surrounded by and packed with 15 cm thick layer of char coal dust and common salt, earth lead GI wire 4.00 mm dia by means of bolts, Nuts, Check Nuts and washers of galvanized iron and thimbles and other end of the earth wire connected to main switch board and protected by galvanized iron pipe light grade 15 mm bore and water pipe 20 mm bore GI light grade with funnel and wire mesh PCC chamber in cement concrete 1:3:6 type C-2 & RCC cover all as specified & shown in elect plate No. 3 of SSR part I of 2010 including testing on completion complete all as specified and directed. (Note:-Earth strip and protection pipe upto board is included in the rate quoted)

Supply,laying, jointing and testing, XLPE insulated, armoured heavy duty electric cable with aluminium conductor 1100 volts grade of size 16 sqmm 2 core laid in trenches, ducts, pipes, on poles and connection with necessary cables lugs, glands nut bolts complete after taking down old unserviceable cable all as specified and directed. (Note :- Excavation of earth work, removing, returning filling in, sand cushioning, concrete cable cover and protection GI pipe shall be measured and paid separately and length of cable shall be one length unless otherwise as directed by GE).

M&L for dry sand cushioning to underground cable, provided with a layer 8 cm thick before and 15 cm deep after laying and stretching jointing and testing the cable complete all as specified and as directed. (Note: Punned thickness of sand shall be measured and paid).

M&L for brick covering with width equal to length of brick as mechanical protection to cable using sub class ‘B’ bricks laid flat, size 230mm x 115mm x 75mm, complete all as specified and as directed.

M&L for 50mm dia galvanized steel tubing (light grade) with complete all fittings such as elbow, unions, nipples, tees, bends, short pieces, connections, check-nuts, caps, plugs, diminishing pieces and flanges etc as in pole, crossing of roads, laid in trenches, fixed on walls for protection complete as in repair all as specified and directed.

M&L for sheet metal enclosure MCB distribution board, double door single pole and neutral with IP-66 protection single phase 240 volts 08 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete as in repair all as specified and directed. (Note:- MCBs will be measured separately.)

M&L for lamp holder insulated body PVC/ Polycarbonate type with back plate suitable for batten/angular/pendent fittings including LED lamp 15watt complete all as specified and directed.

Supply, Laying, connecting and testing of service cable of size 16 Sqmm 2 core 1100 volts grade heavy duty cable PVC insulated stranded alumn conductor, served with an inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 mtr apart including 4mm suspension wire or drawn in and including medium grade non metallic rigid PVC conduit as per site requirement, flat or circular after taking down old service cable complete all as specified and directed.

M&L for sheet metal enclosure MCB distribution board, double door single pole and neutral with IP-66 protection single phase 240 volts 04 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete as in repair all as specified and directed. (Note:- MCBs will be measured separately.)

Supply, installation, testing and commissioning of 200 KVA copper wound servo voltage controlled automatic voltage stabilizer (oil colled)conforming to IS with and including following components and specifications :- (a) Input Voltage-300 to 480 (Phase-Phase) (b) output Voltage - 415 volt +/- 1.0 % (Phase-Phase) (c) Frequency - 50 HZ. (d) Capacity overload - 20 % over load for one hour (e) Protection- overload and short circut through micro process or based MCCB. (f) Outdoor type, IP-55 certification required. (g) Unbalanced type. (h) Suitable for all power factor. (j) Cooling shall be ONAN. (k) Efficiency shall be more than 95 % (l) Adequate size of stabilizer using heavy duty TATA steel. (m) Speed of correction more than 8 volt per second for single phase voltage and 15 volt per second for phase to phase voltage. (n) No distoration in wave form (o) Response time not excceding 20 mili second (p) Sensitivity (+/-) 1%. (q) Type of load : three phase unbalance type. (r) Disital display volmeter/Ammeter (s) By pass arrangement in case of emergency (t) Single phase sequence change protection (u) Suitable capacity of AC synchronous servo motor (v) Suitable quantity of fresh transformer oil for adequate cooling of make:- Power oil/Savita. (w) Quality of copper of purity 99.97 % pure. (x) Slector switch to check input and output voltage. (y) Auto/mannual switch to operate the stabilizer in manual mode with the help of push buttons, in case of failure in automatic circuit. (z) Heavy duty aluminum bus bar for input and output connections. (aa) Unidirectional roller wheels for easy portablity. (ab) Cooling tube/ radiators for cooling of oil (ac) Lifting lugs for lifting (ad) Oil level gauge. (ae) First filling of new transformer oil as per IS-335, filtered and tested for die electric strength not less than 40 KV at 2.00 mm gap between testing electrode (Note: Servo motor stablizer shall be copper wound comprising of above elements/parts with first filing of transformer oil as per IS upto appropriate level to be filled by the by the contractor and rattes shall be deemed to be includied in the quoted rate of this item.

Earthing complete with galvanised steel earth plate electrode 600x600x6mm thick burried directly in ground earth pit not less than 2.25m deep below ground level with top edge of the plate not less than 1.5m deep below normal ground level connected to and including 25X4mm thick galvanised iron strip by means of bolts, nuts, checknuts and washers of galvanised iron or steel all as specified in electrical plate No 3 of SSR (2010) part-I including 40mm bore GI pipe light grade for protection of earth strip and PCC 1:2:4 type B-1 as in pit, Precast RCC earth pit cover 8 cm thick reinforced with 8mm dia TMT bars @150mmc/c and two handles, excavation and earth work in any type of soil and alternate layers of charcoal, common salt and 20mm bore galvanised medium grade steel tubing for watering with one end fixed with cast iron funnel and wire mesh and testing on completion complete all as specified and directed. (Note:-Earth strip and protection pipe upto board is included in the rate quoted)

M&L for MCCB triple pole & neutral, 415 Volt, 63 amps adjustable type with rupturing capacity 36 KA, including providing thimble for out going cable complete all as specified and directed

Supply,laying, jointng and testing, XLPE insulated, armoured heavy duty electric cable with aluminium conductor 1100 volts grade of size 70 sqmm 3.5 core laid in trenches, ducts, pipes, on poles and connection with necessary cables lugs, glands nut bolts complete all as specified and directed. (Note :- Excavation of earth work, removing, returning filling in, sand cushoining, concrete cable cover and protection GI pipe shall be measured and paid separetly and length of cable shall be one length unless otherwise as directed by GE).

Note:- The contract sum arrived after deduction of amount of Sch of credit as listed in tender Documents.

VIJAY KUMAR SURI AND SONS

M/s Anil Engineers & Builders

M/S BADRI NATH GUPTA