Construction of Anganwadi Building at village Nani Banugar Ta.Di.-Jamnagar

Name of Work:- Construction of Anganwadi Building at village Nani Banugar Ta.Di.-Jamnagar

Taluka: Jamnagar Dist: Jamnagar.

BILL OF QUANTITIES

Sr. No. Description of Item (With brief Quantity Unit Rs. In Amount

specification and reference to book of figure

specifications)

1 Excavation for foundation in Dense or Hard 26.00 Cum. 161.07

Soil upto any depth including sorting out

and stacking of useful materials and

disposing off the excavated stuff upto all lead

2 Excavation for foundation in hard murrum 16.00 Cum. 273.44

upto any depth including sorting out and

stacking of useful materials and disposing

off the excavated stuff upto all lead and lift.

3 Providing and laying cement concrete 1 : 4 : 8 15.70 Cum. 2781.12

(1 cement : 4 coarse sand : 8 hand broken

stone aggregate 40 mm nominal size ) and

curing complete excluding cost of form work

in Foundation and plinth.

4 Brick work using common burnt clay building 34.90 Cum. 4310.73

bricks having crushing strength not less than

35 kg./Sq.Cm. in foundation and plinth in

Cement Mortar 1:5. (1- Cement : 5 -fine

sand)(B) Conventional

5 Filling available excavated earth (excluding 46.00 Cum. 137.47

rock) in trenches. plinth, sides of

foundations etc. in layers not exceeding

cm. in depth consolidating each

disposited layer by ramming and watering.

6 Providing and laying cement concrete 1:1.5:3 2.90 Cum. 4889.60

(1 Cement : 1.5 coarse sand : 3 graded stone

aggregate 20mm nominal size) for reinforced

concrete curing complete including cost of

formwork for Coping.

7 Filling in plinth with sand under floor including 3.60 Cum. 489.28

watering ramming consolidating and dressing

8 Brick work using common burnt clay building 20.40 Cum. 4599.16

bricks having crushing strength not less than

35 kg./Sq.Cm. in super structure in Cement

Mortar 1:5. (1- Cement : 5 -fine sand)(B)

9 Half brick masonry in common brunt clay 8.00 Sqm. 640.77

building bricks having crushing strength not

less than 35 Kg/Sq.Cm. in Cement mortar 1:4

(1- Cement : 4 -coarse sand ) in foundation

and plinth (B) Conventional

10 Providing and laying cement concrete work 0.60 Cum. 4461.90

1:1.5:3 (1- Cement : 1.5- Coarse sand : 3-

graded stone aggregates 20 mm nominal

size) and curing complete excluding cost of

formwork and reinforcement for reinforced

concrete work in footing base

1 of 7 DTP of anganvadi Nani Banugar 09-26.xls

Sr. No. Description of Item (With brief Quantity Unit Rs. In Amount

specification and reference to book of figure

specifications)

11 Providing and laying ordinary cement 0.40 Cum. 11028.20

concrete 1:1.5:3 (1- Cement 1.5- coarse sand :

3- graded stone aggregates 20 mm nominal

size) and finishing smooth with,curing etc.

complete including the cost of formwork but

excluding the cost of reinforcement for R.C.C

work for column.

12 Providing and laying cement concrete 1:1.5:3 1.00 Cum. 4557.74

(1 Cement : 1.5 coarse sand : 3 graded stone

aggregate 20mm nominal size) for reinforced

concrete curing complete excluding cost of

reinforcement but including cost of formwork

for Vertical and Horizontal fin up to floor two

13 Providing and laying ordinary cement 3.40 Cum. 8035.64

concrete 1:1.5:3 (1- Cement 1.5- coarse sand :

3- graded stone aggregates 20 mm nominal

size) and finishing smooth with,curing etc.

complete including the cost of formwork but

excluding the cost of reinforcement for R.C.C

work in (A) BEAMS :(iii) Having cross-

sectional area more than 0.12Sq.M and upto

14 Providing and Laying ordinary cement 7.10 Cum. 7910.75

concrete 1:1.5:3 (1- Cement 1.5- coarse sand :

3- graded stone aggregates 20 mm nominal

size) and finishing smooth with curing etc.

complete including the cost of formwork but

excluding the cost of reinforsement for R.C.C

work in (iii) Slabs having more than 10 cm and

upto 13 cm. thickness

15 Providing H.Y.S.D. Bar reinforcement for 1460.00 Kg. 63.87

R.C.C. work including bending, binding and

placing in position complete upto floor two

16 Providing and fixing in positing M.S.Angle 5.80 Sqm. 2115.86

40mm x 40mm x 6mm frame for doors of 25 x

25 x 5 mm angle for shutter frame and

16guage M.S.Sheet welded to shutter frame

and as per the approved drawing and design

and including 3 coats of oil paint including a

primer coat of red oxide paint and all

necessary fitting, fixture locking

arrangements etc complete.

17 Providing and fixing in positing M.S.Angle 7.70 Sqm. 3134.88

35mm x 35mm x 6mm frame for windows and

ventilators of 25 x 25 x 5 mm angle for shutter

frame and 16guage M.S.Sheet welded to

shutter frame and 6mm square bar for grill as

per the approved drawing and design and

including 3 coats of oil paint including a

primer coat of red oxide paint and all

necessary fitting, fixture locking

arrangements etc complete.

18 Providing and fixing M.S. Plain grills of 238.00 Kg. 118.17

required pattern to wooden frames of

windows etc. with M.S. flats at required

spacings and frame alround, square or round

bars with round headed bolts and nuts or by

2 of 7 DTP of anganvadi Nani Banugar 09-26.xls

Sr. No. Description of Item (With brief Quantity Unit Rs. In Amount

specification and reference to book of figure

specifications)

19 Providing and laying 25mm thick polished 83.00 Sqm. 1019.39

Kota stone slab flooring over 20mm (Average)

thick base of cement mortar 1:6 (1-cement : 6-

coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 -

coarse sand) laid over and jointed with grey

cement slurry mixed with pigment to match

the shade of slab including rubbing and

polishing etc. complete.

20 Providing and laying white glazed tiles 6mm 15.00 Sqm. 1127.48

thick in skirting risers of steps and dado on

10mm thick cement plaster 1:3 (1 cement :

coarse sand) and jointed with white cement

21 Providing 15mm thick cement plaster in single 107.00 Sqm. 225.28

coat on brick / concrete wall for interior

plastering up to floor two level finished even

and smooth in(I) Cement mortar 1:3 (1 cement

: 3 sand) Finishing with applying two coats of

putty & two coats of primer of approved brand

and manufacture on new wall surface to given

an even shade including thoroughly brushing

the surface free from mortar dropping and

other foreign matter and sand paperd smooth.

22 Providing 10mm thick cement plaster in single 2.80 Sqm. 179.11

coat on brick / concrete wall for interior

plastering up to floor two level finished even

and smooth in(I) Cement mortar 1:3 (1 cement

: 3 sand) Finishing with applying two coats of

putty & two coats of primer of approved brand

and manufacture on new wall surface to given

an even shade including thoroughly brushing

the surface free from mortar dropping and

other foreign matter and sand paperd smooth.

23 20mm thick sand faced cement plaster on wall 81.00 Sqm. 323.21

for all height 10meters above ground level

consisting of 12mm thick backing coat of C.M.

1:3 (1 cement : 3 sand) and 8mm thick

finishing coat of C.M. 1:1 (1 cement : 1 sand)

24 Wall painting (two coats) with plastic emulsion 107.00 Sqm. 238.77

paint of approved brand and manufacture on

undecorated wall surface to give an even

shade including throughly brushing the

surface free from mortar droppings and other

foreign matter and sand papered smooth

special painting work as per directed by

Engineer in charge..

25 Finishing wall with weather proof exterior 81.00 Sqm. 256.65

emulsion paint on wall surface (two coats) to

give an required shape even shade after

thoroughly brushing the surface to remove all

dirt, and remains of loose powdered

materials.etc complete special painting work

as per directed by Engineerin charge.

3 of 7 DTP of anganvadi Nani Banugar 09-26.xls

Sr. No. Description of Item (With brief Quantity Unit Rs. In Amount

specification and reference to book of figure

specifications)

26 supplying and fixing in position double 6.00 Sqm. 251.80

polished kota stone of 25 mm thick for

27 Providing cement vata (10cm x 10cm size) 38.00 Rmt. 24.28

quarter round in cement mortar 1:1 including

neat cement finishing watering etc. complete.

28 Providing and fixing G.I. Rain water spout of 4.00 Rmt. 101.91

50mm dia. and 30cm. length.

29 Providing and fixing water closet squatting 1.00 No. 1471.10

pan (Indian type W.C. pan) size 580mm inc

providing and fixing 100mm p or s trap & pair

of foot rest 250 mm X 130 mm x 30 mm (A)

Vitreous china .etc. comp.

30 Providing and fixing wash basin with single 1.00 No. 1766.09

hole for pillar tape with C.I. of M.S. brackets

painted white including cutting holes and

making good (VITREOUS CHINA IN WHITE

COLOUR) & also providing and fixing

fisherunion (32mm) C.P. brass waste for wash

31 Providing laying and jointing in true line and 25.00 Rmt. 91.84

level 25mm dia. U.P.V.C. Pipe ( SCH- 40) for

cold water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on the

wall with the help of clamp at every two metre

C/C or shall be concealed as directed

including necessary fittings etc. including

testing of pipe and joints and fixing the same

with adhesive solvent, including cost of all

32 Providing laying and jointing in true line and 10.00 Rmt. 72.65

level 15mm dia. U.P.V.C. Pipe ( SCH- 40) for

cold water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on the

wall with the help of clamp at every two metre

C/C or shall be concealed as directed

including necessary fittings etc. including

testing of pipe and joints and fixing the same

with adhesive solvent, including cost of all

33 Providing and fixing 15mm dia pillar tap, 1.00 No. 308.73

capstan head, screw down high pressure

with screws, shanks and back nuts.

34 Providing and fixing S.W. gully trap with C.I. 1.00 No. 1246.92

grating brick masonry chamber and water

tight C.I. cover with frame of 300mm x 300mm

size (inside) with standard weight.(i) Square

mouth traps.(B) 150mm x 100mm size P or R

35 Providing and fixing cast iron (Spun) Nahni 3.00 No. 651.54

trap of the following nominal diameter of self

cleaning design with C.I. screaed down or

higned grating including cost of cutting and

making good the walls and floor 100mm inlet

and 50mm outlet.(C) 100mm dia.

36 Providing and fixing 25mm dia Gun metal 1.00 No. 420.63

check or non-return fullway wheel valve.

4 of 7 DTP of anganvadi Nani Banugar 09-26.xls

Sr. No. Description of Item (With brief Quantity Unit Rs. In Amount

specification and reference to book of figure

specifications)

37 Providing and fixing 15mm dia Gun metal 1.00 No. 186.83

check or non-return fullway wheel valve.

38 Providing and fixing Brass screw down bib 3.00 No. 186.83

taps of 15mm dia.

39 Providing erecting and fixing double coated 2000.00 Ltr. 3.95

ISI water tank of required capacity each with

all necessary fittings and connection etc.

complete on terrace

40 Providing sock pit of 5.00 Cu.M. Volume 1.00 No. 3222.29

including excavating and filling brickbats with

dry masonry work at top for 45cm. height

including covering the top with stone

including providing vatas in C.M. 1:3 with

finishing curing etc. complete as directed.

41 Providing and supplying 75mm outer dia 6 5.00 Rmt. 104.03

Kg/Sqm low dencity capacity PVC pipe with

necessary fitting etc complete.

42 Providing and fixing PVC SWR pipes IS 13592 10.00 Rmt. 265.34

for Drain 110mm dia.

43 Constructing brick masonry chamber for 2.00 No. 2932.93

underground C.I. Inspection chamber and bends

with bricks having crushing strength not less than

35Kg/Cm2 in C.M. 1:5 C.I. cover with frame (Light

duty) 455mm x 610mm intenal dimensions total

weight of cover with frame to be not less than

38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. )

(R.C.C. top slabe with 1:2:4 mix (1-cement :2-

coarse sand :4-graded stone aggregate 20mm size)

foundation concrete 1:5:10 inside plaster 15mm

thick with cement mortar 1:3 finished smooth with a

floating coat of neat cement on walls and bed

concrete etc. complete.(i) Inside dimensions

455mmx 610mm and 450mm deep for single pipe

44 Providing and fixing sandwitch type platform of 2.10 Sqm. 10010.11

75cm high from finished floor level using 25mm

thick kotah stone slab as a base and 18mm thick

mnirror polished full round edged granite slab on

top , 25mm thick mirror polished / kotah stone

supports of 75cm wide at 45cm c/c or as directed

including providing / grnite side 'Patta' of 30cm

wide on three sides of the platform and providing

and fixing S.S. kitchen sink glosy ASIS 304 grade x

1mm thick with over all size 610 x 460mm & bowl

size 560 x 410 x 200 as per detailed drawing and as

45 Providing and laying brick on edge flooring 6.00 Sqm. 586.56

laid dry grouted with c.M. 1:6 (1 - Cement : 6 -

coarse sand) including finishing the joints

flush curing etc. complete.

46 Providing and laying 50mm thick cement 56.00 Sqm. 347.15

concrete flooring 1:2:4 (1-cement : 2-coarse

sand : 4-graded stone aggregate 20mm

nominal size) laid in one layer and finished

with a floating coat of neat cement.

5 of 7 DTP of anganvadi Nani Banugar 09-26.xls

Sr. No. Description of Item (With brief Quantity Unit Rs. In Amount

specification and reference to book of figure

specifications)

47 Providing and laying broken chine mosaic 54.08 Sqm. 779.70

flooring for terrace using 12 mm to 20 mm

broken pieces of glazed tiles to be laid over

cement mortar 1:3 to plain or slope and to be

tempered to bring mortar creme out upto

surface using white cement including

rounding off junctions and extending them

upto 15 cm along the wall,clearing with water

and oxalic acid etc. as directed.

48 Providing and fixing 20cm. x 15cm x 2.5 cm. 1.00 No. 279.69

thick year plate of marble stone set in C.M. 1:4

including finishing and engraving letters etc.

49 Providing and fixing 100 x 30mm thick teak 18.00 Sqm. 1735.18

wood frame & 19mm thick commercial block

board fully paneled shutters, cupboards

including fixing oil painting and French

polishing with S.S. fixtures and fastening.

50 Box cutting the road surface to proper slope 10.00 Cum. 111.85

and camber for making a vase for road work

including removing the excavated stuff and

depositing on the road side slope as directed

51 Providing and fixing pre-cast Rubber Dye / 66.00 Sqm. 707.55

steel Dye inter locking concrete block 60mm

thick with grade of concrete M300 pnumatic

compressed / vibrated mechanically and as

per approved design Confirming to IS 15658 :

2006 including 35 mm Sand layer for levelling

and filling the joint with sand in proper line

and level as per guidlines of IRC : SP 63-2018

Amount of my tender work out as under

I / We am/are willing to carry out the work at ………………………………………….. % above / below Percent

[should be written in figures and words] of the estimated rates mantioned above. Amount of my/our tender

works out as under

Estimated Amount Put to tender: Estimated Amount Put to tender:

Deduct % below Add % above

Net Rs. Net Rs.

In words : In words :

Signature of Contractor

Deputy Executive Engineer Executive Engineer

Panchayat (R & B) Sub Division Panchayat (R & B) Division

Jamnagar. Jamnagar.

6 of 7 DTP of anganvadi Nani Banugar 09-26.xls

Sr. No. Description of Item (With brief Quantity Unit Rs. In Amount

specification and reference to book of figure

specifications)

1 All work shall be carried out as per Public Works Department Handbook and other

specifications of Division or as directed.

2 All the columns is Schedule should be filled in ink and the total of the entries in the last

column should be struck by the contractor under his signature.

3 Rates quoted include clearance of site (prior commencement of work and at its close )

in all respects and hold good for work under all conditions, site, moisture, weather etc.

4 The contractor shall exhibit the board at site of work with the details of works, Tender

amount and specification as per Govt. Circular No. BBG / 3277 / 1657 / N, Dt.26-4-78 and

as per G.R.No. TNC -1090-24-C, Dt.18-11-91, as directed by Engineer-in-charge of the

works, exhibit board at site of work, for which contractor is not entitiled for any extra

5 Contractor shall even " NIL " percentage, if no deduction is offered.

6 One percent of work done amount of this work shall be recovered from the contractor

payment as " Labour Cess " in terms of the Guajarat Govt. gazette extra ordinary dt.

12/12/2004 implementation of building and other construction works.(Regulation of

employment & condition of service act

7 Testing of materials shall be as per statement attched for quality control. The material

shall be tested in GERI bill for the testing charge shall be paid by the Department and

% (One percent) of amount put to tender after deduction of cost of material as per

scheule-A shall be recovered from the contractor's running Bill as per GR of R.& B.

Dept. No.TNC / 1085 / 4 / C Dt. 20-12-91 & modified R.& B. Dept. Circular No.SSR /

Signature of Contractor :

Deputy Executive Engineer Executive Engineer

Panchayat (R & B) Sub Division Panchayat ( R & B ) Division,

Jamnagar. Jamnagar

7 of 7 DTP of anganvadi Nani Banugar 09-26.xls