NAM Construction of 50 Bedded Integrated AYUSH Hospital Chalakkudy Phase Two Thrissur Composite Work

APPENDIX-A- OUTSIDE WORKS(Civil work)

2.32:Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared.

15.7.1:Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In mud mortar

15.9.2:Demolishing stone rubble masonry manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer -in- Charges:In cement mortar

15.3:Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of Engineer -in-Charge.

2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

2.25:Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.

7.1.1:Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand)

4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)

5.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete

5.9.5:Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers

5.9.19:Centering and shuttering including strutting, etc. and removal of form for:Weather shade, Chajjas, corbels etc., including edges

5.9.16.1:Centering and shuttering including strutting, etc. and removal of form for: Edges of slabs and breaks in floors and wallsUnder 20 cm wide

5.9.6:Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts

5.9.3:Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform

OD318208/2025-2026:Providing and laying in position machine batched and machine mixed design mix M25 Grade cement concrete for reinforced cement concrete work, using cement content as per approved Design Mix including pumping of concrete to site of laying, curing, carriage for all leads but excluding the cost of centering, shuttering, finishing and reinforcement including admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength as per direction of the engineer-in-charge.Note: Minimum cement content considered for this item is 330 kg/cum of concrete.Note: Cement content obtained as per Design Mix shall be used by the contractor at the site to obtain the required strength.Excess cement used as per Design Mix is not payable separately as per Circular No.CE/BL/GL/6541/2015 Dated:30.08.2017 of Chief Engineer ,Building , PWD. All work up to plinth level

OD318209/2025-2026:Providing and laying in position machine batched and machine mixed design mix M25 Grade cement concrete for reinforced cement concrete work, using cement content as per approved Design Mix including pumping of concrete to site of laying, curing, carriage for all leads but excluding the cost of centering, shuttering, finishing and reinforcement including admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength as per direction of the engineer-in-charge.Note: Minimum cement content considered for this item is 330 kg/cum of concrete.Note: Cement content obtained as per Design Mix shall be used by the contractor at the site to obtain the required strength.Excess cement used as per Design Mix is not payable separately as per Circular No.CE/BL/GL/6541/2015 Dated:30.08.2017 of Chief Engineer ,Building , PWD. All work above plinth level

5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

5.22A.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo - Mechanically Treated bars of grade Fe-500D or more

50.6.2.2:Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete

13.16.1:6 mm cement plaster of mix:1:3 ( 1 cement : 3 fine sand)

13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

13.2.1:15 mm cement plaster on the rough side of single or half brick wall of mix:1:4 (1 cement :4 fine sand)

13.48.1:Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications:Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of special primer applied @ 0.75 ltr /10 sqm

13.48.3:Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications:Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture

9.48.1:Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to steel windows by welding

11.37:Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete

OD318214/2025-2026:Providing and laying 80 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.

OD318213/2025-2026:Providing and fixing G.I. pipes complete with G.I. fittings (Cost of fittings to be paid separately) External work - 50 mm nominal dia

OD318211/2025-2026:Providing & fixing Poly carbonate multi wall plain sheet 4 mm thick as approved by the Engineer in charge and should be supplied in a single length of 12 M or as decide by the Engineer in charge. The sheets shall be fixed using self drilling/ self tapping screw of size (5.5x55mm) with EPDM seal complete upto any pitch in horizontal / vertical / curved surfaces, but excluding the cost of purlins, rafters, trusses and including cutting to size and shapes where ever required.

10.25.2:Item Shifted to Sub head 14 as item 14.73 Item Shifted to head 14 as item 14.74 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

16.62:Providing and applying 2.5 mm thick road marking strips ( retro - reflective ) of specified shade / colour using hot thermoplastic material by fully / semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T & P, cleaning the road surface of all dirt, seals, oil grease and foreign material etc. complete as per direction of Engineer - incharge and accordance with applicable specifications .

9.121:Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross- section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminated shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame.

9.122.2:Providing and fixing to existing door frames.30 mm thick Fiberglass Reinforced Plastic (F.R.P) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF) / Polystyrene foam to be used all filler material throughout the hollow panel, casted monoolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS : 14856, complete as per direction of Engineer-in-charge.

21.1.1.1:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionAnodised aluminium (anodised transparent or dyed to required shade according to IS : 1868, Minimum anodic coating of grade AC 15)

21.1.2.2:For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron)

21.3.1:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm)

9.102:Providing and fixing aluminium casement stays, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.

OD318210/2025-2026:Supplying,Installation,Testing, Commissioning of Ferro-Cement Rain water harvesting tank of 8000 Liters, Wall thickness 50mm and top cover slab thickness 100mm including transportation and pit work (excluding plumbing).

OD318212/2025-2026:Supplying,Installation,Testing and Commissioning of 20KLD STP with 2000LPH ultra filteration including Civil,Electrical and Mechanical works.

APPENDIX-B- INSIDE WORKS(Civil work)

10.28:Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)

50.9.1.1:Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately), using good quality Anjili wood /jack wood

50.9.2.1:Providing and fixing paneled and glazed shutters for doors, windows and clerestory windows, 35 mm thick shutters including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineerin - charge using Anjili/ Jack wood

50.9.3.1:Providing and fixing paneled or paneled and glazed shutters for doors, windows and clerestory windows, 30 mm thick shutters including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding paneling which will be paid for separately, all complete as per direction 0f Engineer in- charge. using Anjili/ Jack wood

11.46.2:Providing and laying Vitrified tiles indifferent sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x600 mm

17.10.1.1:Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required: Kitchen sink with drain board510x1040 mm bowl depth 250 mm

21.18:Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge ( Door handle, lock and stopper etc to be paid separately)

21.1.1.1:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionAnodised aluminium (anodised transparent or dyed to required shade according to IS : 1868, Minimum anodic coating of grade AC 15)

21.1.2.2:For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron)

21.2.2:Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre- laminated particle board with decorative lamination on both sides

50.9.11.1:Providing and fixing Thomson Multi wood board or equivalent make paneling 12 mm thick, to frame, backing or studding with screws etc. complete ( Frames, backing or studding to be paid separately) as per the direction of site Engineer-in-charge.

21.3.1:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm)

9.114.2:Providing and fixing magnetic catcher of approved quality in cupboard/ward robe shutters, including fixing with necessary screws etc. complete.Double strip (horizontal type)

8.2.2.2:Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Area of slab over 0.50 sqm

10.29.1:Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete.Galvanised M.S. Wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides

OD318204/2025-2026:Supply , Installation,Testing and Commissioning of 25mm SCH 40 seam less MS pipe Jindal make for LPG line for Kitchen and Panchakarma

OD318202/2025-2026:Supply ,Installation,Testing and Commissioning of 6 Cylinder gas bunk and all accessories needed for gas pipe line delivery system.

OD318207/2025-2026:Distribute and secure bio-medical waste collection bin for the safe handling and disposal of waste generated in healthcare facilities and other medical settings.

OD318203/2025-2026:Supply, installation, and fixing of blinds and M-Track systems in designated areas of the hospital building, ensuring durability, functionality, and compliance with healthcare standards.

OD318206/2025-2026:Supply and installation of high-quality curtain cloth in designated areas of the hospital building, ensuring durability, hygiene, and aesthetic appeal.

9.47.1:Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets:20 mm dia (heavy type)

OD318205/2025-2026:Supply, installation, and fixing of protective films on doors within the hospital building, ensuring durability, hygiene, and compliance with healthcare standards.

APPENDIX-C- PLUMBING WORKS(Civil work)

17.7.9:Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Surgeon Type wash basin of size 660x460 mm with single 15 mm C P. brass pillar taps with elbow operated levers ISI marked

50.18.7.6.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing . This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 50 mm dia 6 Kgf/cm2 - Internal work- Exposed on wall

50.18.8.3.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 25 mm pipe 10kgf /cm2

50.18.9.19.2:Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 110 m dia 4 Kgf/cm2 - External work - Exposed on wall

50.18.9.22.6:Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110x110x110 mm dia Door tee

18.17.1:Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :25 mm nominal bore

50.18.9.19.1:Providing and fixing PVC pipes including fixing the pipe with clamps/ clips/ at 1.00 m spacing . This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 110 mm dia 6 Kgf/cm2 - External work- Exposed on wall

50.18.9.8.1:Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 75 mm dia 6 Kgf/ cm2

50.18.9.9.1:Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of Joints complete as per direction of engineer in charge.110 mm dia 6Kgf/cm2

18.7.6:Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall50 mm nominal dia pipes

APPENDIX-D-FIXING OF SIGNAGES (Civil work)

OD318222/2025-2026:Supplying and fixing of Doctor's Name Board with Aluminium body and PVC acrylic letters.

OD318223/2025-2026:Supplying and fixing ACP & Clear acrylic board with Vinyl letters.

OD318220/2025-2026:Supplying and fixing of 4mm Acrylic and Vinyl printing.

OD318221/2025-2026:Supplying and fixing ACP and Vinyl printing including all charges.

OD318219/2025-2026:Supplying and fixing of ACP Laser cutting with LED including all charges.

OD318224/2025-2026:Supplying and fixing of 2mm White Acrylic with letters including all charges.

APPENDIX - E - LANDSCAPING(Civil work)

30.2.1:Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly levelling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or / and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure).

30.2.2:Supplying and stacking of good earth at site including royalty and carriage upto 5 k.m. lead complete (earth measured in stacks will be reduced by 20% for payment).

30.2.5:Rough dressing the trenched ground including breaking clods.

30.2.12:Uprooting rank vegetation and weeds by digging the area to a depth of 60 cm, removing all weeds and other growth with roots by forking repeatedly, breaking clods, rough dressing, flooding with water, uprooting fresh growths after 10 to 15 days and then fine dressing for planting new grass, including disposal of all rubbish with all leads and lifts.

30.2.29.1:Providing Circular Cement Concrete pots of specified size, cast with cement concrete of nominal mix 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 6 mm nominal size), reinforced with 7 Nos ( 3 nos horizontal & 4 nos vertical “ U “ shape) M.S. wires of 3.5 mm dia as per design, including required form work, finishing with cement punning on exposed surface, curing for specified period and stacking in required rows & height, all complete as per direction of Officer-in-charge.Top inside dia 35 cm, outer bottom dia 25 cm, total height 35 cm with wall thickness of 25.4 mm

30.2.31.1:Filling of the following size empty pots with mixture of good earth & manure in the ratio of 2:1 (Two part of Good earth & one port of manure) and placing them on approprite place i/c carriage of earth, manure and pots up to 50 mtr, as per direction of officer incharge. (The cost of good earth, earthen pots & manure will be paid seperately.)Size of Empty Pots 16cm Top dia, 12cm Bottom Dia & 14cm Perpendicular height

30.2.57.1:Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unsaverieable material?s as per direction of officer in charge (excluding cast of plant & water )Cost of plantation per trees plants (for 100 nos.=427.45/100)

30.2.57.2:Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unsaverieable material?s as per direction of officer in charge (excluding cast of plant & water )Cost of plantation per Shrubs plants (for 200 nos.=427.45/200)

30.2.57.3:Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unsaverieable material?s as per direction of officer in charge (excluding cast of plant & water )Cost of plantation per Hedge plants (for 300 nos.=427.45/300)

30.2.26:Providing and fixing M. S. tree guard 45 cm square in plan, height 1.20 metre above ground level and 0.40 metre below ground level. The vertical members shall consist of four nos. angle iron of size 25x25x3 mm, 1.6 m long, one at each corner and 8 nos flat iron of size 25x3 mm, 1.2 m long. The vertical mambers shall be welded to 4 nos. 25x6 mm M. S. flats placed horizontally around the vertical member of the cage. One name plate of 1 mm thick M.S. sheet of size 250x100 mm shall be welded to the tree guard near the middle height and lettered CPWD/ PWD/ any other approved name. The tree guard shall be fixed to the ground by making suitable holes and by embedding four corners leg in the ground, including refilling the earth, compaction etc. complete. The tree guard shall be painted with two or more coats of synthetic enamel paint of approved brand and manufacture over a coat of primer, complete in all respect.

30.2.50:Providing & fixing of White River (Stone) Pables size of 2" to 2.50" dia in natural colour at site of work including loading, unloading, carriage and all taxes paid etc.and as per direction of officer in charge.

50.18.9.3.2:Providing and fixing PVC pipes includes jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 25 mm dia 10KGF/cm2

50.18.9.8.1:Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 75 mm dia 6 Kgf/ cm2

16.69:Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature jointed with cement mortar 1:3 ( 1 cement : 3 coarse sand) , including making joints with or without grooves ( thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge ( length of finished kerb edging shall be measured for payment ). ( Precast C.C. kerb stone shall be approved by Engineer-in-Charge)

APPENDIX-F- BRIDGE(Civil work)

OD318218/2025-2026:RING BUND Type II Putting up ring bund with earth fille gunny bags of top width 1.0m bottom width 2.0m height 2.0 m side and filling in between with earth to form ring bund and maintaining the same leak proof till the completion of the work and clearing the site by dismantling the bund after completion of the work.etc.complete.

50.2.3.1:Pumping or Bailing out water and removing slush etc by using pump set including cost of labour, oil hire charges of pumpset, etc complete

2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

5.9.5:Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers

5.9.6:Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts

5.9.3:Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform

4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

OD318217/2025-2026:Providing and laying in position machine batched and machine mixed design mix M30 Grade cement concrete for reinforced cement concrete work, using cement content as per approved Design Mix including pumping of concrete to site of laying, curing, carriage for all leads but excluding the cost of centering, shuttering, finishing and reinforcement including admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength as per direction of the engineer-in-charge.Note: Minimum cement content considered for this item is 350 kg/cum of concrete.Note: Cement content obtained as per Design Mix shall be used by the contractor at the site to obtain the required strength.Excess cement used as per Design Mix is not payable separately as per Circular No.CE/BL/GL/6541/2015 Dated:30.08.2017 of Chief Engineer ,Building , PWD. All work up to plinth level

5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

10.25.2:Item Shifted to Sub head 14 as item 14.73 Item Shifted to head 14 as item 14.74 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

16.67:Providing and fixing at or near ground level factory made RCC pavement slab of M - 30 grade of size 450 x450x50 mm, including reinforcement with 6 mm dia M.S. bars 4 nos on each side, including setting in position in footpath to the required level and line over a bed of 20 mm average thick cement mortar 1:5 ( 1 cement : 5 coarse sand), having joint thickness not mote than 5 mm except on curve, including filling of joints with same cement mortar and making grooves etc. complete as per direction of Engineer-in-Charge.

16.69:Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature jointed with cement mortar 1:3 ( 1 cement : 3 coarse sand) , including making joints with or without grooves ( thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge ( length of finished kerb edging shall be measured for payment ). ( Precast C.C. kerb stone shall be approved by Engineer-in-Charge)

APPENDIX - G - CIVIL WORK FOR ELECTRICAL ITEMS(Civil work)

2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kinds of soil

2.25:Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.

4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)

5.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete

5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

OD318216/2025-2026:Providing and laying in position machine batched and machine mixed design mix M30 Grade cement concrete for reinforced cement concrete work, using cement content as per approved Design Mix including pumping of concrete to site of laying, curing, carriage for all leads but excluding the cost of centering, shuttering, finishing and reinforcement including admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength as per direction of the engineer-in-charge.Note: Minimum cement content considered for this item is 350 kg/cum of concrete.Note: Cement content obtained as per Design Mix shall be used by the contractor at the site to obtain the required strength.Excess cement used as per Design Mix is not payable separately as per Circular No.CE/BL/GL/6541/2015 Dated:30.08.2017 of Chief Engineer ,Building , PWD. All work up to plinth level

OD318215/2025-2026:Providing and laying in position machine batched and machine mixed design mix M25 Grade cement concrete for reinforced cement concrete work, using cement content as per approved Design Mix including pumping of concrete to site of laying, curing, carriage for all leads but excluding the cost of centering, shuttering, finishing and reinforcement including admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength as per direction of the engineer-in-charge.Note: Minimum cement content considered for this item is 330 kg/cum of concrete.Note: Cement content obtained as per Design Mix shall be used by the contractor at the site to obtain the required strength.Excess cement used as per Design Mix is not payable separately as per Circular No.CE/BL/GL/6541/2015 Dated:30.08.2017 of Chief Engineer ,Building , PWD. All work up to plinth level

50.6.2.1:Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15 cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15cm in: CM 1:6 ( 1 cement :6 coarse sand) etc complete

13.2.1:15 mm cement plaster on the rough side of single or half brick wall of mix:1:4 (1 cement :4 fine sand)

ELECTRIFICATION (Electrical work)

OD319297/2025-2026:Supply, unloading, installation, testing and commissioning of 250 kVA Diesel Generator Set with Acoustic Enclosure conforming to CPCB IV+ norms. The DG Set shall have the specifications as follows:- ENGINE Diesel Oil Engine with direct injection, 4 stroke vertical in line cylinders, liquid cooled with specified shaft output after reduction of power for engine Auxiliaries and when operating at a governed speed of 1500 RPM at NTP condition. The engine shall be suitable for continuous duty and conform to IS 10000 or other necessary standards as required. The engine shall be with all standard specifications, accessories, fittings etc. complete as required ALTERNATOR Self-excited, self-regulated, screen protected, drip proof alternator with static excitation system, capable of developing rated output at 415 V, Power Factor 0.8, Frequency 50 Hz when running at 1500 RPM at NTP conditions and conforming to IS 4722 etc. The alternator shall have special windings to reduce harmonics and the same made with vacuum pressure impregnation and epoxy gel coating on the winding etc. complete as required CONTROL PANEL Floor mounting sheet steel construction fabricated out of 1.6mm sheets and with one / two hinged front doors of 2 mm sheet steel bolted back / sides, totally enclosed and vermin proof with the following components. 1 Nos - Digital Multifunction Meter measuring Alternator parameters like Voltage, Frequency, Amps, KW, KVAR, PF etc. 3 Nos - 400/5A 5VA CL:1 CT 1 Nos - Three Phase 4 Wire KWH Meter 1 Set ? Aluminium/Copper Busbars of 400A Rating 2 Nos - Indicating lamps showing SET RUNNING and SET ON LOAD 1 Nos - 400A 36kA 4P MCCB with Shunt Release 3 Nos - Instrument Fuses 2 Nos - Earthing Studs 1 Nos - Earth Fault Relay 1 Nos - 80/5A 5VA or Required CL: 5P10 Neutral CT etc. complete as required ACOUSTIC ENCLOSURE Fabricated out of 16 SWG CRCA MS sheet with nut bolt type construction, Powder coating done after seven-tank surface preparation process of sheet metal, Canopy panel and doors shall have inside lining of Fire Retardant foam as acoustic material, four hinged doors shall be provided to canopy, one door shall have glass window for control panel etc. complete as required NOISE LEVEL 75 DB at 1 metre from the enclosure surface under free field conditions as per CPCB Norms etc. complete as required BASE FRAME Fabricated in sheet metal, rugged in construction, designed for mounting engine and close coupled, with cross members mounted on AVM, having provision for mounting of acoustic enclosure, lifting hook for convenient lifting of complete set, i.e., along with canopy, engine and alternator etc. complete as required FUEL TANK Removable type fuel tank with 8 hours full load running capacity fabricated out of CRCA MS sheet duly painted and fitted with inlet and outlet connections etc. complete as required ACCESSORIES 2 Nos - Dry 12V Battery 2 Nos - Battery Charger 2 Set - Battery leads 1 Nos - Exhaust Expansion Bellow etc. complete as required REMOTE MONITORING SYSTEM DG Set shall be linked with a central monitoring data server through SIM and internet in order to view all critical indicators on mobile or laptop with alarms etc. complete as required The scope also includes the testing of Energy Meter, CTs, Relays etc. and obtaining test certificate from Electrical Inspectorate. (*All Statutory fees shall be remitted by the Client / Consumer or it shall be reimbursed on the submission of supporting documents). The DG Set shall be provided with a standard warranty of 24 months. The scope also includes providing AMC for a period of 5 Years from the date of installation and commissioning including during the standard warranty period with a minimum of 4 visits per year for necessary checking and for doing any preventive maintenance works

OD319278/2025-2026:Supply and installation of IP 67 Thermoplastic Polycarbonate PC - GFS Junction Box for unprotected outdoor application with multi-level knockouts for glanding cables of different sizes with internally embedded gasket technology (Polyurethane). The lid fasteners shall have captive type thermoplastic screws with quarter turn knob option and the junction box shall fulfill the standards of IEC 60670-22 : Particular requirements for connecting boxes and enclosures, IEC 60695-2-11 : Glow Wire tested at minimum 960 Deg.C, Impact Resistant : IK 09 (10 Joule), Halogen Free as per IEC 60 754-2 with 4 Pole loop in and loop out terminals suitable to terminate up to and including 16 Sq.mm A2XFY cables and also having provision for fixing DP Isolator / MCB etc. complete as required

2.10.3:Supplying and fixing 5A to 32 A rating, 240/415 volts, 10 kA, ""C"" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Double pole

OD319295/2025-2026:Supply and laying of XLPE insulated and PVC sheathed armoured aluminium power cable of 1.1 kV grade of the following sizes in the existing earth excavated trenches, built up trenches, and pulling through pipes etc. complete as required 3.5 core 185 Sq.mm

OD319256/2025-2026:Supply and laying of XLPE insulated and PVC sheathed armoured aluminium power cable of 1.1 kV grade of the following sizes in the existing earth excavated trenches, built up trenches and pulling through pipes etc. complete as required 3.5 core 150 Sq.mm

OD319282/2025-2026:Supply and laying of XLPE insulated and PVC sheathed armoured Aluminium power cable of 1.1 kV grade of the following sizes in the existing excavated trenches, built up trenches and pulling through existing pipes including all minor civil works etc. complete as required 3.5 Core 95 Sq.mm

OD319283/2025-2026:Supply and laying of XLPE insulated and PVC sheathed armoured aluminium power cable of 1.1 KV grade of the following sizes in the existing earth excavated trenches, built up trenches, and pulling through pipes etc. complete as required 4 core 10 Sq.mm

OD319326/2025-2026:Supply and laying of XLPE insulated and PVC sheathed armoured aluminium power cable of 1.1 KV grade of the following sizes in the existing earth excavated trenches, built up trenches, and pulling through pipes etc. complete as required 4 core 6 Sq.mm

OD319257/2025-2026:Supply and laying of XLPE insulated and PVC sheathed armoured copper power cable of 1.1 KV grade of the following sizes in the existing earth excavated trenches, built up trenches, and pulling through pipes etc. complete as required 4 core 2.5 Sq.mm

OD319294/2025-2026:Supply and laying of XLPE insulated and PVC sheathed armoured copper power cable of 1.1 KV grade of the following sizes in the existing earth excavated trenches, built up trenches, and pulling through pipes etc. complete as required 2 core 2.5 Sq.mm

90.12.7.34:Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 185 sq mm

90.12.7.31:Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 95 sq mm

90.12.7.30:Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 70 sq mm

90.12.7.29:Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 50 sq mm with factory made clamp

90.12.7.40:Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 10 sq mm with factory made clamp

90.12.7.39:Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 6 sq mm with factory made clamp

OD319318/2025-2026:Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured copper power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 2.5 sq mm with factory made clamp

OD319274/2025-2026:Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured copper power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.2 core 2.5 sq mm with factory made clamp

9.1.27:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 185 sq. mm (57mm)

9.1.26:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2 X 150 sq. mm (50mm)

9.1.24:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 95 sq. mm (45mm)

9.1.23:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 70 sq. mm (38mm)

9.1.32:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 10 sq. mm (25mm)

OD319265/2025-2026:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 6 sq. mm

OD319258/2025-2026:Supplying and making end termination with brass compression gland and copper lugs for following size of PVC insulated and PVC sheathed / XLPE copper conductor cable of 1.1 KV grade as required.4 X 2.5 sq. mm

OD319298/2025-2026:Supplying and making end termination with brass compression gland and copper lugs for following size of PVC insulated and PVC sheathed / XLPE copper conductor cable of 1.1 KV grade as required.2 X 2.5 sq. mm

OD319254/2025-2026:Supply and providing gland earthing using Gland Earthing Clips / Clamps / Copper Strip for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required 3 1/2 X 185 Sq. mm

OD319316/2025-2026:Supply and providing gland earthing using Gland Earthing Clips / Clamps / Copper Strip for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required 3 1/2 X 150 Sq. mm

OD319291/2025-2026:Supply and providing gland earthing using Gland Earthing Clips / Clamps for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required 3 1/2 X 95 Sq. mm

OD319308/2025-2026:Supply and providing gland earthing using Gland Earthing Clips / Clamps for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required 3 1/2 X 70 Sq. mm

OD319275/2025-2026:Supply and providing gland earthing using Gland Earthing Clips / Clamp for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required 3 1/2 X 50 Sq. mm

OD319299/2025-2026:Supply and providing gland earthing using Gland Earthing Clips / Clamps for following size of PVC insulated and PVC sheathed / XLPE aluminium cable of 1.1 KV grade as required 4 X 25 Sq. mm

OD319273/2025-2026:Supply and providing gland earthing using Gland Earthing Clips / Clamps for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required 4 X 10 Sq. mm

OD319290/2025-2026:Supply and providing gland earthing using Gland Earthing Clips / Clamps for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required 4 X 6 Sq. mm

OD319264/2025-2026:Supply and providing gland earthing using Gland Earthing Clips / Clamps for following size of PVC insulated and PVC sheathed / XLPE copper conductor cable of 1.1 KV grade as required 4 X 2.5 Sq. mm

OD319302/2025-2026:Supply and providing gland earthing using Gland Earthing Clips / Clamps for following size of PVC insulated and PVC sheathed / XLPE copper conductor cable of 1.1 KV grade as required 2 X 2.5 Sq. mm

OD319286/2025-2026:Excavation of all types of soils for the laying of PVC insulated and PVC sheathed / XLPE Aluminium or Copper conductor cable, GI / DWC HDPE / RCC / PVC / Conduit Pipes, Earthing conductors to the required width and depth up to and including 1.2m and back filling etc. complete as required. (The trench dimensions and specifications shall conform to CPWD / PWD, Electrical Inspectorate and KSEBL Standards)

OD319319/2025-2026:Supply and providing sand cushioning by laying it above the PVC insulated and PVC sheathed / XLPE Aluminium or Copper conductor cable, GI / DWC HDPE / RCC / PVC / Conduit Pipes, Earthing conductors in the existing excavated trench etc. complete as required

OD319281/2025-2026:Supply and providing protective covering by laying bricks breadth wise above the PVC insulated and PVC sheathed / XLPE Aluminium or Copper conductor cable, GI / DWC HDPE / RCC / PVC / Conduit Pipes, Earthing conductors in the existing excavated trench etc. complete as required

OD319276/2025-2026:Supply and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate with inscription there on, bolted / welded to 35 mm X 35 mm X 6 mm GI angle iron, 60 cm long painted with 2 coats of epoxy primer and 2 coats of epoxy paint and fixing the same in ground with cement concrete in M.15 Grade (1:2:4) etc. complete as required

90.12.9.2:Supplying, laying and jointing of the following sizes of double wall corrugated (DWC) pipes made out of HDPE conforming to IS 14930 Part II for mechanical protection to underground power cables with all required accessories in ground in the existing trench50/38 mm or nearest size

OD319289/2025-2026:Earthing with CI earth plate 1200mm x 1200mm x 12.6mm thick including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long with charcoal / coke and salt etc. complete as required

OD319262/2025-2026:Earthing with CI earth plate 600mm x 600mm x 6mm thick including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long with charcoal / coke and salt etc. complete as required.

OD319268/2025-2026:Supply and laying of the earthing conductors of the following size and laying in earth excavated trenches, built up trenches, clamping in trays, walls, racks, risers, trusses etc. using heavy duty Aluminium / GI flats or existing DMC / Epoxy supports of which spacing between 35cm to 65cm without making holes in the earthing conductor and pulling through pipes including all minor civil works, including connection / terminating with existing Stainless Steel bolts, nuts, round and spring washers after tinning process etc. complete as required. (Jointing shall be done by overlapping and with existing 2 sets of Stainless Steel bolts, nuts, round and spring washers spaced at 50mm) 25mm x 3mm Copper Strip

OD319270/2025-2026:Supply of Stainless Steel 304 Grade 6mm x 11/4 Inch bolts and its nuts, spring washers and double round washers etc. complete as required

OD319279/2025-2026:Supply of Stainless Steel 304 Grade 6mm x 1 Inch bolts and its nuts, spring washers and double round washers etc. complete as required

90.16.1.4:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required4.00 mm copper conductor ( 8 SWG)

90.16.1.3:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.15 mm copper conductor ( 10 SWG)

90.16.5.4:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.4.00 mm (8 SWG)

90.16.5.3:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.3.15 mm (10 SWG)

OD319272/2025-2026:Supply and installation of Tinned Stainless Steel Earth Bench / Terminal Strip of 8 Poles manufactured in accordance with IS / IEC 62305-3:2010 and IEC 62561-2:2012 with Stainless Steel bolts, nuts, round and spring washers or screws etc. The Terminal Strip shall have the specifications of minimum Width 25mm, Thickness 4mm, insulations provided at mounting ends etc. complete as required

OD319261/2025-2026:Supply, fabrication and installation of cable tray and supports using MS Angles and Flats of adequate size painted with two coats of epoxy primer and two coats of black / grey / other approved colour epoxy paint. The scope also the includes the supply and installation of necessary rectangular / square plates, anchor fasteners, bolts, nuts, round and spring washers, screws etc. complete as required

OD319320/2025-2026:Supply and installation of the following size of duly Powder Coated Perforated Type Galvanized Iron Cable Tray of sheet thickness not less than 2mm joined with connectors including Stainless Steel bolts, nuts, round and spring washers but excluding mounting MS Structural supports or other accessories like thread rods, unistrut channels etc. complete as required 50 x 200 x 50mm to 50 x 350 x 50mm (Including Both Sizes Also)

OD319307/2025-2026:Supply and installation of the following size of duly Powder Coated Perforated Type Galvanized Iron Cable Tray Fittings of sheet thickness not less than 2mm including Stainless Steel bolts, nuts, round and spring washers but excluding mounting MS Structural supports or other accessories like thread rods, unistrut channels etc. complete as required 50 x 200 x 50mm to 50 x 350 x 50mm Elbow / Tee (Including Both Sizes Also)

OD319304/2025-2026:Supply and installation of the following size of duly Powder Coated Perforated Type Galvanized Iron Cable Tray of sheet thickness not less than 2mm joined with connectors including Stainless Steel bolts, nuts, round and spring washers but excluding mounting MS Structural supports or other accessories like thread rods, unistrut channels etc. complete as required 50 x 50 x 50mm to 50 x 150 x 50mm (Including Both Sizes Also)

OD319312/2025-2026:Supply and installation of the following size of duly Powder Coated Perforated Type Galvanized Iron Cable Tray Fittings of sheet thickness not less than 2mm including Stainless Steel bolts, nuts, round and spring washers but excluding mounting MS Structural supports or other accessories like thread rods, unistrut channels etc. complete as required 50 x 50 x 50mm to 50 x 150 x 50mm Elbow / Tee (Including Both Sizes Also)

OD319285/2025-2026:Supply and installation of the following size of duly Powder Coated Perforated Type Galvanized Iron Cable Tray Fittings of sheet thickness not less than 2mm including Stainless Steel bolts, nuts, round and spring washers but excluding mounting MS Structural supports or other accessories like thread rods, unistrut channels etc. complete as required 50 x 350 x 50mm to 50 x 50 x 50mm Reducer (Including Both Sizes Also)

OD319300/2025-2026:Supply, fabrication and installation of Transformer / DG Set / Panel Board mounting and cable tray supports using MS C Channels of adequate size painted with two coats of epoxy primer and two coats of black / grey / other approved colour epoxy paint. The scope also the includes the supply and installation of necessary rectangular / square plates, anchor fasteners, bolts, nuts, round and spring washers, screws etc. complete as required

OD319266/2025-2026:Supply, fabrication and installation of MS Checkered Plates of 6mm thickness painted with two coats of epoxy primer and two coats of black / grey / other approved colour epoxy paint to use directly above the cable trenches or with cable trenches having existing M.S Angles / Flats / C Channel supports etc. complete as required

OD319280/2025-2026:Supply and providing extension of DG exhaust pipeline using 150mm dia B Class MS pipes with all required accessories like bends, coupling, flanges, flexibles, bolts, nuts etc. using already fabricated and duly painted existing MS or SS support structure etc. and painting the same using 600 Deg.C Heat Resistant Aluminium paints etc. complete as required

OD319263/2025-2026:Supply and providing extension of DG exhaust pipeline using 125mm dia B Class MS pipes with all required accessories like bends, coupling, flanges, flexibles, bolts, nuts etc. using already fabricated and duly painted existing MS or SS support structure etc. and painting the same using 600 Deg.C Heat Resistant Aluminium paints etc. complete as required

OD319310/2025-2026:Supply and providing thermal insulation of DG exhaust pipeline by rock wool, chicken wire mesh, cladding by 24 SWG aluminium sheets including the bends / flanges therein by fixing appropriate size Stainless Steel bolts, nuts, round and spring washers or screws etc. complete as required

OD319311/2025-2026:Supply and laying of 1.1kV Grade Heat Resistant Flame Retardant (HRFR) PVC insulated single core copper conductor cables of the following sizes conforming to IS 694 and laying through existing PVC wall trunking / ducts, cable trays using cable ties or clamps, clamping through walls using Aluminium Strip / spacer saddles etc. complete as required 1C X 35 Sq.mm

OD319306/2025-2026:Supply and laying of 1.5 Sq.mm 1.1kV Grade Three Core Round Insulated Copper Conductor and Sheathed Flexible cable with compact construction and high insulation resistance. The cable shall have the specifications of Standard FRLS PVC Insulation, FRLS Sheathing in accordance with IS 694, BS 6500, IEC 60227, DIN VDE-0281, IEC 60754-I IEC, 60332-I, BS 4066-I, ASTMD 2843, ASTMD 2863, Conductor Class 5, Number of Conductor Strands 30, Nominal Diameter of Conductor Strands 0.25mm, Nominal Thickness of Insulation 0.6mm, Nominal Thickness of Sheath 0.9mm, Approximate Overall Diameter 8.2mm, AC Current Rating of 18A, Voltage Drop/Amp/Metre for Single Phase AC 31mV, Maximum Conductor Resistance at 20 Deg.C 13.3 Ohms/Km etc. complete as required

OD319287/2025-2026:Supply of superior quality copper sockets (banana / palm / pin / ring) for each core of the following size of copper conductor cable including crimping etc. complete as required. 35mm / 25mm

OD319313/2025-2026:Supply, installation, testing and commissioning 90W, 220V to 240V, 50Hz, 300mm sweep Heavy Duty Metal Exhaust Fan with rated current of 0.43A, air delivery of 1710 m3/hour, noise level of 50 to 55 dB, rated speed of 1400 revolution per minute etc. in the existing holes using necessary Stainless Steel bolts, nuts, round and spring washers or screws and giving connections with required length of 24/0.20mm 3 core copper conductor flex wire conforming to relevant IS or extending the original wiring etc. complete as required

OD319301/2025-2026:Supply, installation, testing and commissioning 45W, 220V to 240V, 50Hz, 150mm sweep Medium Duty Metal Exhaust Fan with rated speed of 2300 revolution per minute etc. in the existing holes using necessary Stainless Steel bolts, nuts, round and spring washers or screws and giving connections with required length of 24/0.20mm 3 core copper conductor flex wire conforming to relevant IS or extending the original wiring etc. complete as required

OD319331/2025-2026:Supply, installation, testing and commissioning of 20W, 220V to 240V, 50Hz, 200mm Sweep Exhaust Fan with Air delivery of 250m3/min, Rated speed of 1550 Revolution per minute, with ON / OFF and Shutter Open / Close through pull cords in the existing holes using necessary Stainless Steel bolts, nuts, round and spring washers or screws and giving connections with required length of 24/0.20mm 3 core copper conductor flex wire conforming to relevant IS or extending the original wiring etc. complete as required

90.5.1.7:Supply and fixing the following types of superior quality 250V A.C call bell on existing M.S. box and giving connections with required length of 3 core, 16 / 0.20mm 650/1100V grade PVC insulated and PVC sheathed round copper conductor flex wire conforming to relevant ISS or with the extended original wiring, earthing the MS box and making good the surface as required.Gong bell 100mm-without MS box

90.5.1.3:Supply and fixing the following types of superior quality 250V A.C call bell on existing M.S. box and giving connections with required length of 3 core, 16 / 0.20mm 650/1100V grade PVC insulated and PVC sheathed round copper conductor flex wire conforming to relevant ISS or with the extended original wiring, earthing the MS box and making good the surface as required.Ding dong bell

OD319284/2025-2026:Supply and installation of 45W LED Post Top Gate Light fittings with Stainless Steel bolts, nuts, round and spring washers or screws and all other required accessories. The light shall have the specification of Die-cast Aluminium Landscape Luminaire, Rated Voltage 240V, Operating Voltage Range 140V to 270V, Frequency 50Hz, Maximum Ambient Temperature 50 Deg.C, Input Current 0.197A, Rated Wattage 45W, Power Factor greater than or equal to 0.95, THD less than or equal to 10%, Surge Protection Inbuilt, 5 Years Onsite Parts Replacement Warranty etc. and giving connections with required length of 24/0.20mm 3 core copper conductor flex wire conforming to relevant IS or extending the original wiring etc. complete as required

OD319259/2025-2026:Supply, fabrication, conveyance and fixing the following sizes of B class GI pipe bent to shape / cut and welded to shape and fixing the same to wall / parapet using clamps as noted along with each size, painting with two coats of epoxy primer and two coats of epoxy paint, making good the damages, colour washing etc as required. 25 mm dia with HG company fabricated clamps

90.15.4.2:Supply Conveyance, installation, testing and commissioning of 36/40W LED street light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing,acrylic cover complete with THD less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer)

90.15.3.6:Supply installation testing and commissioning of Octogaonal Pole made of hot dip galvanised GI sheet 70 mm top diameter, 130 mm bottom diameter thickness 3mm base plate dimensions of 200x200x12 mm suitable for wind speed as per IS 875 Part III double arm bracket 0.5mt including connector foundation bolt 4 nos fixed in existing RCC foundation and junction box etc. complete 7 Meters

90.15.3.5:Supply installation testing and commissioning of Octogaonal Pole made of hot dip galvanised GI sheet 70 mm top diameter, 130 mm bottom diameter thickness 3mm base plate dimensions of 200x200x12 mm suitable for wind speed as per IS 875 Part III single arm bracket 0.5mt including connector foundation bolt 4 nos fixed in existing RCC foundation and junction box etc. complete 7 Meters

90.15.4.3:Supply Conveyance, installation, testing and commissioning of 70W LED street light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing,acrylic cover complete with THD Less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer)

OD319303/2025-2026:Supply and installation of 75 kVA Double Conversion Online Modular UPS Frame and its allied fittings etc. complete as required. The Frame and all its allied accessories shall be provided with a replacement warranty of 60 Months. The scope also includes providing AMC for a period of 5 Years for the Frame System from the date of installation and commissioning with a minimum of 4 visits per year for necessary checking and for doing any preventive maintenance works

OD319321/2025-2026:Supply, installation, testing and commissioning of Double Conversion Online 25KW Three Phase Module Indoor (IP20) with Surge Protection System, Isolator for each bank battery, Input Power Factor 0.99, Input THDi 3%, Double Conversion Technology with input 400V, 50Hz Three Phase, Output 400V, 50Hz Three Phase, Oil Filled Capacitor with 10 Years Life, ABM Charger will increase the life 50% more, SNMP gigabit card with cyber security for network monitoring, VMMS, BMS compatibility etc. It shall be 100% Generator Compatible, Dust filter, Easy Load tested at Customer Site, V with Efficiency 96 % and Output Power Factor Unity (kVA = kW), Eco Mode Efficiency 99% and including all accessories etc. The acoustic noise at 1m of the system should be 70dB. The system shall comply to IEC /EN 62040-1, EN/IEC 62040-2, EN/IEC 62040-3, CE, relevant IS standard. The system shall be true Online Double - Conversion DSP based UPS system and also UPS shall be with automatic and manual bypass switch. The system shall have 3 level IGBT rectifier and inverter etc. complete as required. The Module System shall be provided with a replacement warranty of 60 Months. The scope also includes providing AMC for a period of 5 Years for the Module System from the date of installation and commissioning with a minimum of 4 visits per year for necessary checking and for doing any preventive maintenance works

OD319277/2025-2026:Supply, installation, testing and commissioning of 12V 42Ah C20 Rated SMF Battery of 36 Nos for a minimum backup of 15 minutes for the existing 25 KW Module UPS System with all accessories like racks, DC Isolator, interconnecting cables, copper sockets including crimping and providing connections etc. complete as required. The Battery and all its accessories shall be provided with a replacement warranty of 36 Months. The scope also includes providing AMC for a period of 5 Years for the Battery System from the date of installation and commissioning with a minimum of 4 visits per year for necessary checking and for doing any preventive maintenance works

2.22:Providing and fixing H.T. danger notice plate of 250 mm X 200 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.

2.21:Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.

OD319269/2025-2026:Supply and fixing 2Kg Dry Chemical Powder (DCP) type fire extinguisher complete with Gun Metal cap, hose with squeeze grip nozzle, wall fixing brackets conforming to BIS: 2171 and with ISI mark etc. complete as required

OD319322/2025-2026:Supply and providing a set of 2 Nos. 9.5 Litre capacity GI bucket painted in post office red colour with prior coat of red oxide paint and written with white paint FIRE and mounted on MS angle iron frame with bracket of appropriate size and capacity including filling sand etc. complete as required

OD319255/2025-2026:Supply and providing 11kV tested discharge rod conforming to IEC 61230 : 2008 etc. complete as required

OD319288/2025-2026:Supply and providing 1 pair of 11kV tested rubber gloves conforming to IS 4770 : 1991 etc. complete as required

OD319296/2025-2026:Supply and providing Electrical Grade Rubber Mat of size 2m x 1m having 12mm thickness in front of HT Panels and Transformer conforming to IS 15652 : 2006 standard etc. complete as required

OD319293/2025-2026:Supply and providing Electrical Grade Rubber Mat of size 2m x 1m having 6mm thickness in front of Panel Boards and DBs conforming to IS 15652 : 2006 standard etc. complete as required

OD319323/2025-2026:Supply and fixing Laminated Safety Instruction Chart duly mounted on a good frame work etc. complete as required

OD319315/2025-2026:Supply and fixing Laminated Shock Treatment Chart duly mounted on a good frame work etc. complete as required

OD319314/2025-2026:Supply and providing tested Industrial Safety Helmet conforming to IS 2925 : 1984 etc. complete as required

OD319271/2025-2026:Painting letters or figures of 4.5cm / 2.5cm sizes with enamel paint as identification mark to each compartments of HT Panels, Transformer, DG Set, Panel Boards, Distribution Boards etc. complete as required

OD319330/2025-2026:Preparation and submission of application, drawings and obtaining Scheme Approval from Electrical Inspectorate. (*All Statutory fees shall be remitted by the Client / Consumer or it shall be reimbursed on the submission of supporting documents)

OD319327/2025-2026:Preparation and submission of Completion Report, arranging inspection and obtaining Sanction for Energization from Electrical Inspectorate. (*All Statutory fees shall be remitted by the Client / Consumer or it shall be reimbursed on the submission of supporting documents)

OD319328/2025-2026:Supply, installation, testing and commissioning of AIQ MCI Based Wireless Six Counter Token System for OP Registration having the following detailed specifications. MANAGING (TOKEN DISPENSER AND MASTER UNIT - 6 Types of Function Keys) - 1 NOS Token Printing by Press Key, Thermal Printer, Edge Technology Token Cutting, Six Types of Function Keys, Wall Mounted and Metallic Cabinet, Indication of Number of Token Issued, Indication of Empty Paper Roll, Details of Token with Hospital Name, Department Name, Phone Number, Token Issue Time and Date, Token Number etc. complete as required CONTROLING (TOKEN CALLING UNIT) - 6 NOS Token Running Display Token, Waiting Display (The Unit shall Display Number of Patients that are waiting in Queue), Next and Recall Token Calling Keys etc. complete as required INFORMING (MAIN DISPLAY) - 1 NOS High Bright and Quality LED Display, Display shall show Separate Counter Number and Token Number (6-Line Display) Multi Language Calling (Both English and Malayalam), Volume controller etc. complete as required AIQ MCI (ADVANTAGES/FEATURES) Staffs dealing with patients shall get less Stressed which increases job satisfaction, Staffs can serve more customers per hour if those customers are fed to each counter efficiently with help of AIQ controlling measurement unit, Helps the management by producing statistical reports on information such as arrival rates and patterns, waiting and service times, and default and Reneging cases, Patients shall be treated with fairness and in more relaxed environment, Queue flow shall be smoother, Increase the efficiency of Queue Management etc. complete as required WARRANTY AND AMC The Wireless Three Counter Token System shall be provided with a standard warranty of 12 months. The scope also includes providing AMC for a period of 5 Years including the standard warranty period with a minimum of 4 visits per year for necessary checking and for doing any preventive maintenance works

OD319325/2025-2026:Supply, installation, testing and commissioning of AIQ MCI Based Wireless Six Counter Token System for Doctor Consultation having the following detailed specifications. MANAGING (TOKEN DISPENSER AND MASTER UNIT - 6 Types of Function Keys) - 1 NOS Token Printing by Press Key, Thermal Printer, Edge Technology Token Cutting, Six Types of Function Keys, Wall Mounted and Metallic Cabinet, Indication of Number of Token Issued, Indication of Empty Paper Roll, Details of Token with Hospital Name, Department Name, Phone Number, Token Issue Time and Date, Token Number etc. complete as required CONTROLING (TOKEN CALLING UNIT) - 6 NOS Token Running Display Token, Waiting Display (The Unit shall Display Number of Patients that are waiting in Queue), Next and Recall Token Calling Keys etc. complete as required INFORMING (MAIN DISPLAY) - 1 NOS High Bright and Quality LED Display, Display shall show Separate Counter Number and Token Number (6-Line Display) Multi Language Calling (Both English and Malayalam), Volume controller etc. complete as required INFORMING (INDIVIDUAL 4 INCH DISPLAY) - 1 NOS High Bright and Quality LED Display, Display shall show Separate Token Number (1-Line Display) Multi Language Calling (Both English and Malayalam), Volume controller etc. complete as required AIQ MCI (ADVANTAGES/FEATURES) Staffs dealing with patients shall get less Stressed which increases job satisfaction, Staffs can serve more customers per hour if those customers are fed to each counter efficiently with help of AIQ controlling measurement unit, Helps the management by producing statistical reports on information such as arrival rates and patterns, waiting and service times, and default and Reneging cases, Patients shall be treated with fairness and in more relaxed environment, Queue flow shall be smoother, Increase the efficiency of Queue Management etc. complete as required WARRANTY AND AMC The Wireless Three Counter Token System shall be provided with a standard warranty of 12 months. The scope also includes providing AMC for a period of 5 Years including the standard warranty period with a minimum of 4 visits per year for necessary checking and for doing any preventive maintenance works

OD319324/2025-2026:Supply, installation, testing and commissioning of AIQ MCI Based Wireless Three Counter Token System for Pharmacy having the following detailed specifications. MANAGING (TOKEN DISPENSER AND MASTER UNIT) - 3 Types of Function Keys) – 1 NOS Thermal Printer, Edge Technology Token Cutting, Three Types of Function Keys, Wall Mounted and Metallic Cabinet, Indication of Number of Token Issued, Indication of Empty Paper Roll, Details of Token with Firm Name, Department Name, Phone Number, Token Issue Time and Date, Token Number etc. complete as required CONTROLING (TOKEN CALLING UNIT) – 3 NOS Token Running Display Token, Waiting Display (The Unit shall Display Number of Patients that are waiting in Queue), Next and Recall Token Calling Keys etc. complete as required INFORMING (MAIN DISPLAY) - 1 NOS High Bright and Quality LED Display, Display shall show Separate Counter Number and Token Number (3-Line Display) Multi Language Calling (Both English and Malayalam), Volume controller etc. complete as required AIQ MCI (ADVANTAGES/FEATURES) Staffs dealing with patients shall get less Stressed which increases job satisfaction, Staffs can serve more customers per hour if those customers are fed to each counter efficiently with help of AIQ controlling measurement unit, Helps the management by producing statistical reports on information such as arrival rates and patterns, waiting and service times, and default and Reneging cases, Patients shall be treated with fairness and in more relaxed environment, Queue flow shall be smoother, Increase the efficiency of Queue Management etc. complete as required WARRANTY AND AMC The Wireless Three Counter Token System shall be provided with a standard warranty of 12 months. The scope also includes providing AMC for a period of 5 Years including the standard warranty period with a minimum of 4 visits per year for necessary checking and for doing any preventive maintenance works

OD319317/2025-2026:Supply, installation, testing and commissioning of 1.5 TR Inverter Type BEE 3 Star Rated High Wall Split Air Conditioner Unit with Copper Condenser, Cordless Remote Control, R 32 Refrigerant, Copper Pipe of 3m using Stainless Steel bolts, nuts, round and spring washers or screws, Heavy Duty Stand for Outdoor Unit etc. complete with connections as required

OD319305/2025-2026:Supply, installation, testing and commissioning of Wall Mounting Type Voltage Stabilizer for Air Conditioners up to and including 2.0 TR having Working Voltage Ranging from 170V to 270V, 15A Capacity with Advanced IC Based Design, Intelligent Time Delay System, Thermal Overload Protection, Under / Over Voltage Protection using Stainless Steel bolts, nuts, round and spring washers or screws, 25A / 16A 3 Pin Top for connections etc. complete with connections as required

OD319267/2025-2026:Supply, installation, testing and commissioning of Additional Copper Piping System for the existing Split Air Conditioner with all necessary accessories and connections etc. complete as required

CAMERA SYSTEMS(Electrical work)

1.21.2:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm

90.9.2.1:Supply and fixing 100 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recess including cutting the wall and making good the damages in case of recessed installation as required.100 x 50 mm CMS with base and lid

OD319247/2025-2026:Supply and installation of IP Bullet Camera Image Sensor ½.8" Progressive Scan, Backlight illuminated CMOS Sensor Maximum Resolution 5 MP (2592 x 1944) Lens Type 2.8 mm fixed lens FOV HFOV - 107.6° VFOV - 57.° DFOV - 127.62° Aperture (F#) F 1.6 Iris Fixed iris Shutter speed 1/15s-1/100000s Minimum Illumination Colour - 0.01 Lux @ (F1.2 AGC ON) Monochrome - 0 Lux Day/Night Camera Switching Automatic/ Manual/ schedule Built in IR irradiance up to 30 m Noise Reduction 2 DNR, 3 DNR (Approved Makes: Sony / AXIS / Honeywell / Matrix)

OD319237/2025-2026:Supply, installation, testing and commissioning of IP Dome Camera Maximum Resolution 5 MP (2592 x 1944) 2.8 mm fixed Lens Built in IR irradiance up to 30 m, Audio IN In-built Microphone Two-Way Audio Supported, Bitrate 128 kbps-16 Mbps, Frame Rate (FPS) 1 to 30,VCA Motion detection, View Tamper Detection, Tripwire detection, object Intrusion Events and actions IP conflict, Network Disconnect, Storage Full, Time Trigger, E- mail, SMS, TCP notification (Approved Makes: Sony / AXIS / Honeywell / Matrix)

OD319253/2025-2026:Supply, installation, testing and commissioning of PTZ 4MP camera:1/1.7'' Progressive Scan SMOS (4000 x 3000) Triple Stream Unique De-warping Image Support Camera and Software De-warping Low Bitrate, Excellent low light performance DWDR, 3D DNR, ROI, Defog, HLC Smart IR up to 15m Micro SD/SDHC/SDXC Slot, Max 128GB (Approved Makes: Sony / AXIS / Honeywell (MAF Required)

OD319242/2025-2026:Supply, installation, testing and commissioning of 32CH Control Mode Desktop Client, Mobile Client, and Local client (Through HDMI) OS Embedded Linux Processor ARM cortex- Quad Core Video-Input 32 IP channels Video Output HDMI (2.0) ? 1 Port (Main) Video Compression H.265/H.264/ Motion JPEG Audio input 1 Channel, RCA Port Audio Output 1 Channel, RCA Port Audio Compression G.711u Two-way Audio Required Recording Resolution Up to 12MP Decoding Resolution (on local display) 4K, 2K, 1080p, 720p, D1, CIF SATA Interface 4 SATA III (10TB per port) Incoming Bandwidth 180 Mbps (Approved Makes: Sony / AXIS / Honeywell / Matrix)

OD319241/2025-2026:Supply, installation, testing and commissioning of Outdoor waterproof high quality camera Housing with Pole mounting Bracket IP 65

OD319240/2025-2026:Supply, installation, testing and commissioning of 10TB HDD for IP Surveillance System (Approved Makes: WD / Toshiba / Seagate)

OD319245/2025-2026:Supply, installation, testing and commissioning of 43" LED Professional Display capable of working 24/7 with 3 Years of Warranty (Approved Makes: Sony / Samsung / LG / Panasonic)

OD319239/2025-2026:Supply and installation of 4K HDMI Cable 15-20/mtr for PC to Display (Approved Makes: Honeywell / Karmer)

OD319246/2025-2026: Supply and installation of IP Camera Mounting box (Approved Makes: ISI Marked and Conforming to PWD Standards)

OD319243/2025-2026:Supply of Camera side crimping RJ45 connector (Approved Makes: AMP / Molex / D-Link)

OD319244/2025-2026:Supply and installation of 24-Port Gigabit Ethernet PoE+ Smart Switch w/ optional Remote/Cloud Management and 4 SFP Ports (380W) Base-T auto sensing PoE+ports, 4 dedicated 100/1000 Base-X Fiber SFP ports, Bandwidth:56 Gbps non blocking, Acoustic noise (ANSI-S10.12): 33.42 dBA, Mean Time between Failures(MTBF): 1,071,896 hours, Heat Dissipation (at AC 97VAC/47Hz and full PoE load): 1501.3 Btu/H (internal PS), Forwarding modes: Store-and -Forward, 4 Priority queues, Priority queuing: Weighted Round Robin (WRR), MAC Address database size: 16,000 media access control (MAC) addresses, VLAN: 256 (Approved Makes: NETGEAR / Juniper / Allied Telesis)

OD319236/2025-2026:Supply and installation of 6 Core OS2 SM Central Loose Tube Armoured External Cable (Approved Makes: Molex / Panduit / Beldon / Siemon)

OD319248/2025-2026:Supply and drawing 1 Run of UTP 4 pair CAT 6 LAN LSH cable in the existing surface/recessed steel/PVC conduit etc. complete as required

OD319250/2025-2026:Supply and installation of 15 U wall mounted Rack 500x550 size with full accessories

OD319249/2025-2026:Supply and installation of SC/PC-LC/PC 3m OS2 Single Mode Duplex LSZH Patch Cord

OD319252/2025-2026:Supply, installation, testing and commissioning of Cat 6 UTP Patch Panel 24 Port Fully Loaded

OD319251/2025-2026:Supply and commissioning of Category 6 U/UTP Patch Cord LSZH 01M

OD319238/2025-2026:Supply and installation of 1U Metal Cable Management with cover

FIRE FIGHTING (Electrical work)

OD319336/2025-2026:MAIN FIRE PUMP SITC of Horizontal, End suction, Top Discharge Back Pull out Design Centrifugal pump with standard construction with BRONZE impeller with Gland Rope squirrel cage, TEFC motor with MS Fabricated channel Base plate, Standard Lovejoy Coupling, MS Coupling Guard. 60HP, 2280 LPM @ 75 mtr head including Anti vibration pad etc. complete as required

OD319338/2025-2026:STAND BY PUMP SITC of horizontal, end suction, top discharge centrifugal pump of standard construction with BRONZE impeller with SS STEEL SHAFT with Gland packing arrangement electric start, water cooled, Radiator type diesel oil engine with MS fabricated channel base plate, Standard coupling, MS Coupling guard with batteries, leads and fuel tank] 68 HP, 2280 LPM @ 75 mtr head including Anti vibration pad etc. complete as required

OD319337/2025-2026:JOCKEY PUMP SITC of multi-stage, stage, centrifugal pump, side suction/end suction, vertical delivery, horizontal with diffuser type casing with BRONZE Impeller with GLAND PACKED totally enclosed fan cooled, horizontal foot mounted, continuous rated, AC 3 Phase, 415 Volts, 50Hz ±5%, combined variation ±10% motor, S1 duty, 50° C ambient, class F Insulation, IP55 Protection both mounted on a common base plate. 7.5 HP, 180 LPM @ 75 mtr head. 1ncluding Anti vibration pad etc. complete as required

OD319333/2025-2026:SITC of MS Pipe Class C medium grade with ISI Mark complete with all necessary fittings such as bolts, nuts, bends, flanges, tees etc. Piping shall have one coat of anticorrosive primer coat over which two coats of signal red paint etc. complete as required 150 mm dia

OD319339/2025-2026:SITC of MS Pipe Class C medium grade with ISI Mark complete with all necessary fittings such as bolts, nuts, bends, flanges, tees etc. Piping shall have one coat of anticorrosive primer coat over which two coats of signal red paint etc. complete as required 100 mm dia

OD319340/2025-2026:SITC of MS Pipe Class C medium grade with ISI Mark complete with all necessary fittings such as bolts, nuts, bends, flanges, tees etc. Piping shall have one coat of anticorrosive primer coat over which two coats of signal red paint etc. complete as required 80 mm dia

OD319341/2025-2026:Preparation and submission of application and obtaining Initial Fire NOC from Department of Fire and Rescue Services. (*All Statutory fees shall be remitted by the Client / Consumer or it shall be reimbursed on the submission of supporting documents)

OD319335/2025-2026:Preparation and submission of Completion Report, arranging inspection and obtaining Final Fire NOC from Department of Fire and Rescue Services. (*All Statutory fees shall be remitted by the Client / Consumer or it shall be reimbursed on the submission of supporting documents)

OD319334/2025-2026:SITC of Fully Automatic Motor Control Panel for Fire Pumps (Main fire Pump 60 HP - 2Nos, Diesel Engine driven pump 68 HP - 1 Nos, Jockey Pump 7.5 HP - 2 Nos) incorporating Automatic Star Delta Starter and Switch Gear Rated for the motor HP. The control panel mounting shall include necessary indication lamps for the RYB phase showing clear indications of the power supply conditions with DMFM with CTs etc. The panel shall duly painted with proper anti-corrosive lacquer and is of foot mounted type with all accessories as required etc. complete as required

ACOUSTIC(Electrical work)

OD319332/2025-2026:Supply and installation of Rock Wool, Fibre Acoustic Panels, Calci Board/Plywood, Room Light, Floor Mat, Track for light etc. complete as required