Loading…
Loading…
Tender ID
Tender Value
₹93,062
EMD Value
₹2,327
Closing Date
21 Feb 2026, 6:00 pmClosed
ASISTANT ENGINEER PERUMBAVOOR MUNICIPALITY
ASISTANT ENGINEER PERUMBAVOOR MUNICIPALITY
PRO NO 345 2025 25CONSTRUCTION OF WELL FOR PAKAL VEEDU WARD 11
2026_LSGD_836405_1
PW1/2497328/345/25-26
Open Tender
Civil Works - Others
Item Rate
150 days
PERUMBAVOOR MUNICIPALITY
Please refer Tender documents.
7 documents required · 7 mandatory
₹555
₹2,327
23 Feb 2026
14 Feb 2026
23 Feb 2026
14 Feb 2026
21 Feb 2026
14 Feb 2026
WELL CONSTRUCTION FOR PAKAL VEEDU
2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kinds of soil
2.26.1:Extra for every additional lift 1.5 m or part there of in excavation / banking excavated or stacked materials.All kinds of soil
OD428244/2025-2026:Bailing out water using 5 HP Pump-Bailing out water with 5 HP Engine and pump set including conveyance to site and erection, cost of fuel, lubrication oil and other stores, pay off staff etc complete. Modified 60.2.2
OD105227/2024-2025:Casting, conveying and lowering at all depth pre cast CC rings of 2.20 Mtr dia and 30 to 40 cm height including jointing with cement mortar.
OD87867/2024-2025:Engaging mancoolies
4.1.6:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 40 mm nominal size derived from natural sources)
50.18.7.4.2:Providing and fixing PVC, pipes fittings including fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 32 mm dia 6 Kgf/cm2 - internal work- Exposed on wall
18.19.1.1:Providing and fixing gun metal non-return valve of approved quality (screwed end): 25 mm nominal boreHorizontal
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.15 MB
345sbd.pdf
Tender Documents • 1.74 MB
TENDERNOTICE.pdf
Other Document • 0.13 MB
BOQ_1407930.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .