Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹1.5 LAccepted-AOC V P O KOTLA KALAN TEHSIL DISTT UNA H P | UNA | HIMACHAL PRADESH | 174301 | ₹1.5 L Quoted ₹2.1 L | 1 | Accepted-AOC Accept |
| 2 | 2₹2.3 L+₹21,375 (10.0%)Rejected-AOC | ₹2.3 L+₹21,375 (10.0%) | 2 | Rejected-AOC Reject |
| 3 | 3₹2.5 L+₹34,800 (16.3%)Rejected-AOC AT GROUND FLOOR MAIN BAZAAR MEHRE TEHSIL BARSAR DISTT HAMIRPUR H P PIN CODE 174305 | HAMIRPUR | HIMACHAL PRADESH | 174305 | ₹2.5 L+₹34,800 (16.3%) | 3 | Rejected-AOC Reject |
| Sl No | Description | Qty | Unit | VIKASH RANA L2 | RAVI KUMAR L3 | Balwant Kumar L1 |
|---|---|---|---|---|---|---|
| 1.00 | Excavation in foundation, trenches etc. in all kinds of soil such as pick work, jumper work, blasting work in soft / hard rock, chiselling in soft / hard including wedging out of a rock where blasting is prohibited and stacking the excavated earth up to all lifts, stacking the excavated soil up to all lead clear from the edge of excavation and then returniing the stacked soil in 15 centimeters layers when required in to plinths, sides of foundation etc. consolidating each deposited layer by ramming and waterng and then disposing of all surplus excavated earth as per direction and to the entire satisfation of Engineer- in- charge up to leads and lifts. | 117 | cum | 675 ₹78,975 | 700 ₹81,900 | 550 ₹64,350 Lowest |
| 2.00Laying, jointing and testing in trenches (to level or grade) of GMS pipes light class jointed with 1% flanged & 99% butt weld joints with of below diametre conforming to IS 1239-1990 (Part - I ) with latest upto date amendments of grade and wall thickness as specified below, suitable to withstand required hydraulic test pressure in randum length 4m-6m with plain ends and jointed with MS Flanges conforming to IS 6392-1971(Latest upto date amendments) and welding of flanges as per IS 816-1969 with electrodes as per IS 814-1991 including required number and size of MS nuts and bolts as per IS 1369-1967 and compressed asbestos fibre jointing gaskets sheet not less than 3.00 mm in thickness as per IS 2712-1998. The welding of flanges to be done on both faces (two layers outter side & one inner side) to make the joints leak proof (earth work, providing and welding M.S flanges and butt welded joints to be mearsured and paid separately) and to entire satisfaction of the Engineer-in-Charge.The laying of pipes conform to IS 5822-1994 and as per CPHEEO manual and will include all operations such as cutting, welding and jointing including flushing, cleaning and hydraulic testing complete in all respect. Excavation in trench, providing and welding of M.S. Flanges and butt welded joint shall be measured and paid for seperately . | ||||||
| 2.01 | GMS pipe 125 mm dia (MC) | 90 | Rmt | 80 ₹7,200 Lowest | 90 ₹8,100 | 90 ₹8,100 |
| 2.02 | GMS pipe150 mm dia (MC) | 200 | Rmt | 80 ₹16,000 Lowest | 90 ₹18,000 | 100 ₹20,000 |
| 3.00Providing circumferencial Butt welded joints by electrical arc welding to following dia GMS Pipes welded in requisite number of weld runs including thread cutting so as to achieve the minimum effective throat thickness of weld conforming to IS 816-1969 specifications, by using welding electrodes of 2.5mm to 6.3mm of Advani Oerlikon (Adore)- CITOJET/ESAB make, conforming to IS 814-1991, at site of work complete in all respects, including manual/mechanical handling of pipes in all leads and lifts to the entire satisfaction of Engineer-in-Charge. | ||||||
| 3.01 | GMS pipe 125 mm dia. | 15 | Joint | 850 ₹12,750 Lowest | 900 ₹13,500 | 900 ₹13,500 |
| 3.02 | GMS pipe150 mm dia. | 37 | Joint | 1,200 ₹44,400 | 1,250 ₹46,250 | 1,000 ₹37,000 Lowest |
| 4.00Providing and fixing double flanged Cast Iron sluice valve of following dia of Kirloskar/Leader make conforming to IS:14846/2000 with up to date amendment as per Class PN-1.6 to withstand in 10.20 kg/cm² seat pressure including welding with M.S. flanges table-5 as per IS 6392-1971 including carriage in all leads and lifts as per direction and to the entire satisfaction of Engineer-in-Charge. | ||||||
| 4.01 | 150 mm dia. | 1 | Nos | 75,000 ₹75,000 | 80,000 ₹80,000 | 70,000 ₹70,000 Lowest |
Tender Value
₹1.9 L
EMD Value
₹3,890
Closing Date
2 Sept 2025, 5:00 pmClosed
Executive Engineer
JS Division Dharampur Bharari
NDF 2023 845 Restoration of rain damages to LWSS LIS under JSV Sub Division Mandap in Tehsil Dharampur Distt. Mandi HP
2025_HPIPH_113147_1
5173-5222 dated 28-08-2025
Open Tender
Civil Works
Item Rate
90 days
Dharampur
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
Executive Engineer
₹3,890
11 May 2026
28 Aug 2025
3 Sept 2025
28 Aug 2025
2 Sept 2025
28 Aug 2025
Amount
Excavation in foundation, trenches etc. in all kinds of soil such as pick work, jumper work, blasting work in soft / hard rock, chiselling in soft / hard including wedging out of a rock where blasting is prohibited and stacking the excavated earth up to all lifts, stacking the excavated soil up to all lead clear from the edge of excavation and then returniing the stacked soil in 15 centimeters layers when required in to plinths, sides of foundation etc. consolidating each deposited layer by ramming and waterng and then disposing of all surplus excavated earth as per direction and to the entire satisfation of Engineer- in- charge up to leads and lifts.
Laying, jointing and testing in trenches (to level or grade) of GMS pipes light class jointed with 1% flanged & 99% butt weld joints with of below diametre conforming to IS 1239-1990 (Part - I ) with latest upto date amendments of grade and wall thickness as specified below, suitable to withstand required hydraulic test pressure in randum length 4m-6m with plain ends and jointed with MS Flanges conforming to IS 6392-1971(Latest upto date amendments) and welding of flanges as per IS 816-1969 with electrodes as per IS 814-1991 including required number and size of MS nuts and bolts as per IS 1369-1967 and compressed asbestos fibre jointing gaskets sheet not less than 3.00 mm in thickness as per IS 2712-1998. The welding of flanges to be done on both faces (two layers outter side & one inner side) to make the joints leak proof (earth work, providing and welding M.S flanges and butt welded joints to be mearsured and paid separately) and to entire satisfaction of the Engineer-in-Charge.The laying of pipes conform to IS 5822-1994 and as per CPHEEO manual and will include all operations such as cutting, welding and jointing including flushing, cleaning and hydraulic testing complete in all respect. Excavation in trench, providing and welding of M.S. Flanges and butt welded joint shall be measured and paid for seperately .
GMS pipe 125 mm dia (MC)
GMS pipe150 mm dia (MC)
Providing circumferencial Butt welded joints by electrical arc welding to following dia GMS Pipes welded in requisite number of weld runs including thread cutting so as to achieve the minimum effective throat thickness of weld conforming to IS 816-1969 specifications, by using welding electrodes of 2.5mm to 6.3mm of Advani Oerlikon (Adore)- CITOJET/ESAB make, conforming to IS 814-1991, at site of work complete in all respects, including manual/mechanical handling of pipes in all leads and lifts to the entire satisfaction of Engineer-in-Charge.
GMS pipe 125 mm dia.
GMS pipe150 mm dia.
Providing and fixing double flanged Cast Iron sluice valve of following dia of Kirloskar/Leader make conforming to IS:14846/2000 with up to date amendment as per Class PN-1.6 to withstand in 10.20 kg/cm² seat pressure including welding with M.S. flanges table-5 as per IS 6392-1971 including carriage in all leads and lifts as per direction and to the entire satisfaction of Engineer-in-Charge.
150 mm dia.
VIKASH RANA (BID ID -549767)
RAVI KUMAR (BID ID -549972)
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.62 MB
Form6.pdf
Tender Documents • 0.83 MB
TC.pdf
Tender Documents • 0.13 MB
Form8.pdf
Tender Documents • 1.29 MB
BOQ_164967.xls
BOQ • 0.27 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .