Replacement of Bare condutor by AB cable

Amount

Supply of Stay Clamp made of MS Flat for PCC Pole 8.5 Mtr. of size 50x6 Sqmm. Duly red oxide painted with suitable size with fitted Nut & Bolts and washer as per specification of UPCL

Supply of Stay Clamp made of MS Flat for STP SP-33 Pole 9 Mtr. of size 50x6 Sqmm. Duly red oxide painted with suitable size with fitted Nut & Bolts and washer as per specification of UPCL

Supply of M.S. Clamp made of M.S. flate for PCC/SP-33 Pole of size 35x5sq.mm duly red oxide painted with suitable size with fitted nuts & bolts and washer for Fixing of M.S. Half Clamp for L.T. Distribution Box without cracks & burrs as per specification of UPCL

Supply of MS Flat for Box Bottam Side of size 35x5 Sqmm duly red oxide painted with suitable size with fitted Nut and Bolts and washer as per specification of UPCL, per box 2 No. Flat Patti.

Supply of M.S. Clamp made of M.S. flate for PCC Pole 8.5 Mtr. long, size 50x6sqmm. duly red oxide painted with suitable size with fitted Nut & Bolts and washer for Dead End without cracks & burrs as per specification of UPCL.

Supply of M.S. Clamp made of M.S. flate for STP SP-33 Pole 9 mtr long, size 50x6sqmm. duly red oxide painted with suitable size with fitted Nut & Bolts and washer for Dead End without cracks & burrs as per specification of UPCL.

Supply of M.S. Clamp made of M.S. flate for PCC Pole 8.5 Mtr. long, size 50x6sqmm. duly red oxide painted with suitable size with fitted Nut & Bolts and washer for Suspension without cracks & burrs as per specification of UPCL.

Supply of M.S. Clamp made of M.S. flate for STP SP-33 Pole 9 mtr long, size 50x6sqmm. duly red oxide painted with suitable size with fitted Nut & Bolts and washer for Suspension without cracks & burrs as per specification of UPCL.

Supply of SMC Three Phase L.T. Distribution Box with inbuilt panal lock, Al bus bar RYB 25x6mm., Al Busbar N. 40x6mm. for connection of L.T. consumer ( Sintex/RMC make or other ISO reputed company ) with Panel Lock with key) ( As per drawing attached )

Supply of insulated Piercing connector body molded from high quality mechanical climate and UV resistant glass reinforced polyamide, hot dipped galvanized bolts & contact teeth ABC size 120 Sqmm to 120 Sqmm/95 Sqmm TYCO/RPG/3M Make

Supply of insulated Piercing connector body molded from high quality mechanical climate and UV resistant glass reinforced polyamide, hot dipped galvanized bolts & contact teeth ABC size 120 Sqmm to 25/16 Sqmm TYCO/RPG/ 3M Make

Supply of Dead End Clamps with I Hook. As per drawing and UPCL Specification.

Supply of Suspension Clamps with I Hook. As per drawing and UPCL Specification.

Supply L.T. Wire Natural Connector PG clamp 95sq.mm. to 25sq.mm. single bolt as per UPCL specifciation.

Supply L.T. Wire Natural Connector PG clamp 95sq.mm. to 95sq.mm. double bolt as per UPCL specifciation.

Supply of Aluminium Lugs ‘O’ type size 25mm. (For connecting Cable PVC 1x25 mm.)

Supply of Aluminium Lugs ‘O’ type size 120mm. (For connecting AB Cable)

Cartage of PCC Pole 8.5 Mtr Long. including Loading / Unloading from store centre at Haldwani/Rudrapur to work site with stacking site in 1Km distance,approximate distance 05-80KM.

Cartage of STP SP-33 Pole 9 Mtr Long. including Loading / Unloading from store centre at Haldwani/Rudrapur to work site with stacking site in 1Km distance,approximate distance 05-80KM.

Cartage of PCC Pole/STP SP-33 Pole from road to work site in 5 Km distance including loading/unloading.

Cartage of Small line material from store centre Kashipur/ Haldwani/Rudrapur to work site including loading & unloading (Distance 5 Km to 80 Km)

Cartage of Small material including from JE store to work site inculding centralized and decentralized materials.

Erection & grouting of P.C.C. Pole8.5 Mtr. Long ( 180 kg. W/L )for reducing span of LT, ABC line including digging of pits 0.6x0.9x2.15 Mtr.grouting stone pad and making kiciking block in E&B And with fitting of all accessories & back filling with soil & boulder earthing complete work as per RESPO specification & as per direction of Engineer in charge

Erection charges of Single Support STP SP-33 Pole after digging of pit size 0.6x0.9x1/6 length of support on 300x300x75 mm stone pad in CC Ratio 1:4:8 in size (Height 0.45 & 0.45 round) above ground level on the pole in CC ration 1:3:6 including cost of cement sand stone ballast and stone pad etc pole in long span as per RESPO specification & as per direction of Engineer in charge

Work for straighening of tilted pole as per direction of Engineer in charge

Erection of stay set 16x1800mm. pit size 0.6x1.6x1.5 Mtr. as per specifications including 7/10SWG stay wire, binding, nozzling of stay with bcking filling of pit with CC 1:4:8 in bottom to pitcomplete work stay set will be provided by UPCL.as per RESPO specification & as per direction of Engineer in charge :

Removal & Re-connection of exising cable of single phase service connection same.

Removal & Re-connection of exising cable of LT Three phase service connection same.

Erection of M.S. Earthing rod 20x2500mm.connecting support with G.I. Wire No. 6 SWG with nut and bolts.

Dismentaling of Old ACAR Conductor L.T. Line including re-rolling cartage from site works to JE store ( L.T. Line 3 Phase 4 wire).

Dismentaling of Old ACAR Conductor L.T. Line including including re-rolling cartage ferom site works to JE store ( L.T. Line 2 Phase 3 wire)

Dismentaling of Old ACAR Conductor L.T. Line including including re-rolling cartage ferom site works to JE store ( L.T. Line 1 Phase 2 wire)

Laying, Stringing, sagging of ABC Cable3x120+1x95mm2 including fixing of Insulated,Piering Connector, Dead end clamp with I Hook, Suspension Clamp with I Hook in all complete work as per direction of Engineer-In-Charge.

Laying & Fixing Insulated Cable LT XLPE Alu. Cond. power cable 1x25 sq.mm. as per direction of Engineer-In-Charge.

Installation & Fixing of L.T.Distribution Box & Connection of L.T. consumer including all complete work as per direction of Engineer-In-Charge.

RAVI CONSTRUCTION CO

Raman electricals