Fire Fighting with Wet Riser System for Multi Level Parking in Super Specialty Block of Government Medical College at Reshamgarh Road Jammu.

Amount

Providing and fixing M.S pipes including all fittings like bends, elbows, plugs, tees, flanges etc. welding complete. Pipes conforming to I.S.1239 (Heavy class) 25 mm dia.

Providing and fixing M.S pipes including all fittings like bends, elbows, plugs, tees, flanges etc. welding complete. Pipes conforming to I.S.1239 (Heavy class) 80 mm dia.

Providing and fixing M.S pipes including all fittings like bends, elbows, plugs, tees, flanges etc. welding complete. Pipes conforming to I.S.1239 (Heavy class) 100 mm dia.

Providing and fixing M.S pipes including all fittings like bends, elbows, plugs, tees, flanges etc. welding complete. Pipes conforming to I.S.1239 (Heavy class) 150 mm dia.

Providing and fixing M.S pipes including all fittings like bends, elbows, plugs, tees, flanges etc. welding complete. Pipes conforming to I.S.1239 (Heavy class) 200 mm dia.(Header Suction and Delivery)

Providing and fixing one coat of 4 mm thick anti-rust pipe protection including primer and lap of 25mm on external buried pipe including surface preparation, complete in all respects. 150 mm dia.

Providing and fixing SS landing valve with 63 mm dia. instantaneous female coupling on the outlet, PVC blank cap and chain, necessary companion flange , nuts, bolts, washer and gasket complete as per IS specifications (Only ISI marked). Single outlet

Providing and fixing first aid fire hose reel wall mounting swinging type fitted with 20mm dia. 30m wall mounting swinging type fitted with 20 mm dia. 30 m long high pressure hose with 5 mm outlet gunmetal nozzle .

Providing and fixing 63mm dia. 15m long rubberized fabric lined hose including SS male and female instantaneous type coupling, machine wound with copper wire complete in all respects. (ISI marked)

Providing and fixing short SS branch pipe. (ISI marked).

Providing and fixing single acting air release valve with screwed inlet 25 mm dia.

Providing and fixing fire hose cabinet fabricated from M.S. Sheet with double glazed front door and locking arrangement, painted "Fire Red" with powder coated paint "Fire Hose" written on front including suitable to house two lengths of canvas hose and branch pipe.

Excavating trenches of required width for pipes cables etc. in any type of soil , depth upto 1.5 mtr including getting out the excavated soil, and then returning the soil as required and disposing of surplus excavated soil .

Providing and fixing fire brigade inlet breaching head as per IS:904 specification with 63 mm dia. instantaneous type inlet and 150/100mm dia. flanged outlet with built-in check valve for fire brigade connection including nuts, bolts & washers etc. 4 way

Providing and fixing M.S. pipe to IS: 1239 (Heavy class) complete with fittings like couplings, bends, elbows, tees, supports, offsets, reducers, flanges including cutting and making good the walls complete.(Internal works for sprinkler piping). 25 mm dia. MS Pipes

Providing and fixing M.S. pipe to IS: 1239 (Heavy class) complete with fittings like couplings, bends, elbows, tees, supports, offsets, reducers, flanges including cutting and making good the walls complete.(Internal works for sprinkler piping). 32 mm dia. MS Pipes

Providing and fixing M.S. pipe to IS: 1239 (Heavy class) complete with fittings like couplings, bends, elbows, tees, supports, offsets, reducers, flanges including cutting and making good the walls complete.(Internal works for sprinkler piping). 40 mm dia. MS Pipes

Providing and fixing M.S. pipe to IS: 1239 (Heavy class) complete with fittings like couplings, bends, elbows, tees, supports, offsets, reducers, flanges including cutting and making good the walls complete.(Internal works for sprinkler piping). 50 mm dia. MS Pipes

Providing and fixing M.S. pipe to IS: 1239 (Heavy class) complete with fittings like couplings, bends, elbows, tees, supports, offsets, reducers, flanges including cutting and making good the walls complete.(Internal works for sprinkler piping). 65 mm dia. MS Pipes

Providing and fixing M.S. pipe to IS: 1239 (Heavy class) complete with fittings like couplings, bends, elbows, tees, supports, offsets, reducers, flanges including cutting and making good the walls complete.(Internal works for sprinkler piping). 80 mm dia. MS Pipes

Providing and fixing M.S. pipe to IS: 1239 (Heavy class) complete with fittings like couplings, bends, elbows, tees, supports, offsets, reducers, flanges including cutting and making good the walls complete.(Internal works for sprinkler piping). 100 mm dia. MS Pipes

Providing and fixing M.S. pipe to IS: 1239 (Heavy class) complete with fittings like couplings, bends, elbows, tees, supports, offsets, reducers, flanges including cutting and making good the walls complete.(Internal works for sprinkler piping). 150 mm dia. MS Pipes

Providing and fixing 15 mm sprinkler head with quartz bulb and set to operate at specified temperature pendent/ upright/ side wall as per instruction. Temperature of operation 68 deg. c Pendent type/ upright type

Providing and fixing C.I. Wafer type dual plate non-return valves including nuts, bolts, gaskets, flanges & washers etc. complete. 150 mm dia

Providing and fixing C.I. Wafer type dual plate non-return valves including nuts, bolts, gaskets, flanges & washers etc. complete. 80 mm dia

Providing and fixing cast iron butter fly valves complete with bolts, nuts, gasket , flanges complete in all respects. 150 mm dia

Providing and fixing cast iron butter fly valves complete with bolts, nuts, gasket , flanges complete in all respects. 100 mm dia

Providing and fixing cast iron butter fly valves complete with bolts, nuts, gasket , flanges complete in all respects. 80 mm dia

Providing and fixing cast iron butter fly valves complete with bolts, nuts, gasket , flanges complete in all respects. 200 mm dia

Providing and fixing copper conductor PVC covered FRLS cable as follows 2 core 1.5 sqmm armoured cable

Wet Riser Pump and Sprinkler Pump (Single stage) Supplying and fixing single stage centrifugal pumping set with volute bronze impeller connected to a TEFC induction motor suitable for 410/440 volts, 3 phase, 50cycles AC supply as per the details given below: Capacity : 2280 LPM Head : 60 meter HP : as required No of stages : single RPM : 2900 Mover : Electric Motor driven. Material of Construction/Specification Shaft & Sleev: S.S. 410 Impeller : Bronze Casing : CI Bearing : Grease lubricated Seal : Mechanical Seal Quantity :

Jockey Pump: (Single stage) Supplying and fixing single stage centrifugal pump with volute bronze impeller connected to TEFC induction motor suitable for 400/410 Volts, 3 Phase, 50 Cycles, AC supply with the following specifications: Capacity : 180 LPM Head : 60 m HP : As required. RPM : 2900 Mover : Electric Motor driven Material of Construction: Shaft & Sleeve : S.S. 410 Impeller : Bronze Bearing : Grease lubricated Seal - Mechanical seal. Quantity :

Diesel Engine Driven Fire Pump Supplying and fixing single stage horizontal centrifugal pumping set of the following specifications including vibration elimination pads. Capacity : 2280 LPM Head : 60 m HP : As required. RPM : 2000/1800 (pump and engine) Mover : Diesel Engine. Material of Construction: Shaft & Sleeve : S.S. 410 Impeller : Bronze Bearing : Grease, lubricated Seal - Mechanical seal. Pump foundation as per manufacturer. Quantity :

Air Vessel for Fire Pump: Supplying and fixing of air vessel of the following specifications. Diameter : 450 mm Shell Thickness: 12 mm Dish Ends : 10 mm Height : 2000 mm Finishing: Two coats of red enamel paint over primer outside and two coats of epoxy coating inside. Material of construction: M.S Test Pressure: 20 kg/sqcm.. Size of Inspection flange: 450 mm dia Height of supporting legs: 400 mm Quantity:

Providing and fixing dial type pressure gauge with Isolation cock Diameter 150 mm calibration 0-10 Kg/ Sq.cm.

Providing and fixing installation valve with turbine type automatic alarm connected with control valve, drain valve, test valve and piping as per manufacturer's specifications complete in all respects. 150mm dia.

Providing and fixing dual type pressure switch suitable for 1-10 Kg/cm2 including electrical connections setting of Cut-In and Cut-Off pressure complete in all respects.

Providing and fixing heavy duty PVC insulated, PVC armoured aluminum conductor cables 1100V grade including necessary support clamps and connection lugs complete in all respects. Power cable 4 core 10 sqmm.

Providing and fixing heavy duty PVC insulated, PVC armoured aluminum conductor cables 1100V grade including necessary support clamps and connection lugs complete in all respects. Power cable 3.5 core 50 sqmm.

Providing and fixing Carbon-dioxide fire extinguishers consisting of welded M.S. cylindrical body, squeeze lever discharge valve fitted with internal discharge tube, 30cms long high pressure discharge hose, discharge nozzle, suspension bracket, confirming to IS: 2878 finished externally with red enamel paint and fixed to wall with brackets with raw plug/ dash fasteners complete with internal charge. The job includes providing and fixing equivalent nos. of sign boards made up of sun board of size 2’x1.5’ with operating instruction. Capacity: 4.5 kg

Providing and fixing carbon-dioxide fire extinguishers trolley mounted with all accessories internal discharge tube, high pressure discharge hose, discharge nozzle, suspension bracket, ISI marked as per IS:2878 finished externally with red enamel paint and fixed to wall with brackets complete with internal charge. The job includes providing and fixing equivalent nos. of sign boards made up of sun board of size2’x1.5’ with operating instruction. Capacity :22.5 kg.

Providing and fixing modular type ABC type dry type dry powder extinguisher consisting of welded MS cylindrical body, with discharge valve, nozzle and fully charged with ABC powder (Mono Ammonium Phosphate) pressured by Nitrogen complete in all respects with actuator, hanging arrangement complete. The job includes providing and fixing equivalent nos. of sign boards made up of sun board of size 2’x1.5’ with operating instruction. Capacity 6 Kg

Providing and fixing of the Instructions sign boards made out of ACP sheet printed with digital vinyl print with lamination duly fixed with steel spacers of different sizes i.e. 2’ x 3’, 3’ x 4’ or as instructed by engineer-in-charge for different types of instructions to be printed. The printed ACP instruction sign boards are to be fixed at various locations / floors of SSH.

Providing and fixing of the Emergency Acrylic LED Exit sign Boards double sided with more than 45 minutes power backup.

Dogra and Dogra Enterprises

SKYLINE AIR CONDITIONING ENGINEERS PVT LTD