EI work at prposed new construction of Pump House and Godown Sugarcan Research station Bethuadahari Nadia

Amount

Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) partly in 20mm size PVC rigid conduit 'FR' (Precision make) [for ceiling portion only] and in 19mm bore, 3mm thick polythene pipe [for horizontal & vertical run embedded in wall], with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board complete with 2 no. suitable size “Ph & N”copper bar with top cover plate making earthing attachment fixed on wall incl. mending good damages to original finish. [only PVC Rigid Conduit on ceiling and remaining portion concealed].A)Average run 12 mtr

Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR'(Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall complete with 2 no. suitable size “Ph & N” copper bar incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. 175mmx100mmx65mm inspection box, makingearthing attachment, paa) inting the MS box and mending good the damages to original finish.[Concealed].A)Average run 6 mtr. [Page E-14/2]

Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR'(Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall complete with 2 no. suitable size “Ph & N” copper bar incl. bakelite/Perspex (wall matching color) top cover 3mm thick and incl. 175mmx100mmx65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish.On Borad.

Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment 14 Way (formally was 2+12 way) ( Make- Seimens/ABB/L&T) [13/D-9]

4 Way (formally was 2+4 way) ( Make- Seimens/ABB/L&T) [NS]

Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connection 40A DP ( Make- Seimens/ABB/L&T) [6/D-5]

63A FP ( Make- Seimens/ABB/L&T) [6/D-5]

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection 6-32A SP [7/D-6] ( Make- Legrand)

Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. 4 Way Enclosure(607715) (Legrand - Make) [14/D-10]

Supplying and fixing of 63A 415V TPN with fuse on L&N Sheet steel Main Switches on angle iron frame on wall L&T [1b/D-1]

Supply of 3.5 Core XLPE Insulated & Sheathed Armoured Aluminium Conductor cables for Working Voltage up to 1100 Volts of following sizes [ Make Polycab / KEI / Fort Gloster] 4 core 35 Sq. mm [NS]

2 core 6 Sq. mm

Laying of one No. cable upto 35 sqmm in underground trench 460mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed.

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below. Upto 35 Sq mm for 3.5 core [7(d)/F-4]

Upto 6 Sq mm for 2 core [7(c)/F-4]

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials Upto 35 Sq mm for 3.5 core [8b(xv)/F-5]

Upto 6 Sq mm for 2 core [8b(x)/F-5]

Cutting channel of 40 mm x 40 mm size on masonry wall incl. S&F heavy gauge polythene pipe dia as stated below, by means of iron hooks and supplying and drawing 18 SWG GI Wire fish wire incl. mending good damages to building works 19 mm dia 3 mm thick polythene pipe without earth continuity wire [3a/E-2]

Supplying & Fixing sheet metal inspection box (16 SWG) of the following sizes flushed in wall by housing the same after cutting brick wall incl. making earthing attachment, painting and mending good damages to building works 175 mm x 100 mm x 65 mm [11c/E-4]

200 mm x 150 mm x 65 mm [11d/E-4]

Supply & Fixing bakelite / perspex top cover on existing Inspection board by Brass screws 175 mm x 100 mm x 65 mm [13c/E-5]

200 mm x 150 mm x 65 mm [13d/E-5]

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required 2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC [1(a)ii/E-14]

2 x 84/0.3 (6 sqmm) + 1 x 56/0.3 (4 sqmm) ECC [1(a)iv/E-14]

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required 4x10 sq mm + 2x 6 sq mm [1d1/E-9]

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. 2.5 Sq mm [9 i ( F-5)]

6 Sq mm [9 iii ( F-5)]

10 Sq mm [9 iv ( F-5)]

Supply and fixing of 4ft Led t-8 box type single batten/double batten with end cap complete with all accessories and polycarbonet Maser LED tube (make: Philips) a) Single fittings [Phillips make (Cat. No.-TMC 502P1XT LED.

S&F of 18W LED T-8 lamp (Phillips Make - (Cat.No. 18W P3241) 1200mm MAS LED tube] on fittings.

Supply and fixing of Midbay Luminire 120 watt ,ceiling (Surface/Suspended) mount & available in Wide beam (Rotational Symmetric).(Make: Philips BY515P LED 2005 5700 NBS1 PSU GR/Havells/Cropmton)

Supply 1200mm (48") sweep ceiling fans complete with all accessories having the following Model / Cat No. Orient-Summer cool [ Make- Orient/Usha/Havells/CG ]

Supply and delivery 250V 9" Exhaust fan (make- EPC/CG)

Supply& delivery of 230 Volt 450mm, Metal Body heavy duty wall bracket fan (make- Orient Tornado Wall-II)

Fixing only cabin fan on wall/ceiling by S&F rag bolts, nuts & washers (6 mm dia x 62 mm long) or as reqd. incl. S&F 24/0.20 PVC insulated flexible copper wire 0.5 mt. length [29/C-4]

Supplying & Fixing iron beam fan clamp of two piece type, as per approved specification, fabricated from 40 mm x 9 mm MS sheet flat suitable for beam having flange upto 150 mm wide – (As per Drawing no. 476 of PWD Specification Book – May 1991) [30/D-14]

Supply & Fixing louver shutter on wall with necy. bolts & nuts (6 mm dia x 62 mm long) 23 cm (9") [32b/D-14]

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire [21a/C-3]

Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter: 23 cm (9") [28a/C-4]

Excavation of soil for installation of Earth Electrode and filling & ramming For Soft Soil [1(a)/G-1]

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: By ISI-Medium GI pipe [2(a)/G-1]

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required [4(a)/G-2]

Earth Continuity Conductor : Solid GI wire No. 4 SWG

Supply & delivery of 60 Watt LED STREET Iight fittings with aesthetically designed roadway with execellent thermal management and IP66 protection [ make- Philips-urban ege Pro cat No. BRP501 LED78 CWR5c PSU S1) /Crompton/Havells.

S&F AC machine timer for one no. machine febricated with double door 8Way SPNDB as per L&T Cat no-LTSDO8N) i) 240 V, 32A DP MCB of breaking capacity 10KA & ''C'' Charecteristic (L&T)-1no ii) 22A TP power contactor with 220 coil voltage (L&T, Cat no-MNX22-2P, CS90238)-1 No. iii) Digital timer switch (L&T, cat no-Crono 67DDTO)-1no [N/S]

Fixing only outdoor / street light type fluorescent light fitting complete with all accessories to be fixed/projected from the wall of the building incl. making holes to building, S&F 40 mm dia GI pipe (ISI-Medium) 1.50 mts. average length, with GI socket at one end and thread at the other end & suitable bend to house the fitting & making necy. connections with S&F necy. length of 1.5 sqmm PVC insulated single core stranded annealed copper wire and making connections as required and mending good damages to wall and painting [19/C-3]

S&F GI water proof looping cable box 200x150x100 mm as per GS

MS T CON (BID ID -5744536)

BISWAJIT PAUL (BID ID -5744487)