LAC ADS MLA ADS 2024 25 Reconstruction of Masjid Bridge Connecting ward 5 6 in Mannancherry Panchayath

Amount

APPENDIX -A-Construction of box culvert

2.4.2.A:Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 metres <br> Cement Concrete Grade M-15 & M-20 - By Mechanical Means <br>

OD98529/2024-2025:Putting up ring bund 1.50m wide at top and 4.00m width at bottom, and 2.50m height two rows of 1/2 split coconut post3.50m long at 60cm c/c, 1/3 split coconut wailing pieces, two rows at either sides, 1/3 split areca nut repers 5 rows on either side and full size bamboo post for supplying bund and etamat thatches at both sides etc.

12.1.B.1:Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. Ordinary Soil - Depth upto 3m - Mechanical Means

OD35864/2024-2025:Bailing out water by using 5HP motor and pump set including all cost and erection charges oil and labour charges etc. complete.

OD35865/2024-2025:Supplying and stacking well matured coconut piles 200mm to 300 mm dia, 6.00m long etc: complete

OD35866/2024-2025:Driving down wooden piles (Coconut) 200 to 300mm dia to approved lines and levels through various strata including all hire and labour for staging platform and all other appliances necessary for pile driving after pointing the bottom end up to 5.00mn depth below ground level.

OD35867/2024-2025:Cutting and removing the excess length of wooden piles to lines and levels and remainingthe cut ends of piles and stacking with 150mtr. Etc. complete

OD35868/2024-2025:Dry Rubble masonry : Dry rubble masonry without concrete levelling course masonry with good quality blazed rubble including packing to compactness to lines and levels. Cost and conveyance of all materials , labour etc complete. as per the direction of departmental officers at site

12.8.A.1:Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications. <br> PCC Grade M15 <br>

12.4:Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days.

12.8.E.1.1:Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications. <br> RCC Grade M25 - Using Concrete Mixer <br>

12.40:Supply, Fitting and Placing un- coated HYSD bar Reinforcement in Foundation complete as per Drawing and Technical Specifications

8.8:Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces

12.8.1.C.1:Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications RCC Grade M20 - Using Concrete Mixer

OD36634/2024-2025:Construction of Embankment with Material obtained from Borrow pits :- Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2.

4.1.B.1:Construction of granular sub-base by providing graded material, spreading in uniform layers with a motor grader on a prepared surface, mixing by mix in-place method with rotavator at OMC, and compacting with a vibratory roller to achieve the desired density, complete as per clause 401. Grading-V - For sub-base cum drainage layer - Mix in Place Method

12.8.B:Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications <br> PCC Grade M20 (Without formwork) <br>

55.10.1:Providing and erecting retro-reflectorised Object Hazard Marker 300mm x 900mm <br>Providing and erecting retro-reflectorised Object Hazard Marker sign with 07 years warranty, manufactured as per IRC 67 USING Type IV ASTM D 4956-09 micro prismatic retro reflective sheeting fixed over aluminium sheetig, 2 mm thick / aluminium composit material sheeting 4 mm thick with suitable back support frame and supported on a mild steel angle iron post 75mmx75mmx6mm, firmly fixed 30cm above ground level by means of properly designed foundation with M 15 grade cement concrete 30cmx30x45cm, 45cm below ground level including painting all non-reflective faces with epoxy paint 2 coats over epoxy primer as per approved drawing and clause 801.<br>300 mm x 900 mm

NIZAR PALACKAL MOHAMMED IBRAHIM (BID ID -1954055)

Bidder Name

NIZAR PALACKAL MOHAMMED IBRAHIM

SHAN P THOMAS