Water supply scheme Palampur town in Tehsil Palampur Distt. Kangra H. P SH Construction of permanent structure trench weir

Amount

Excavation in foundation trenches etc.in earth work in all kinds of soil such as pick work,jumper work,blasting in soft and hard rock and chiselling work including saturated soil slushy soil and under floor upto all depth and stacking the excavated soil not more than 3 metre clear from the edge of excavation and then returning the stacked soil in 15 centimetre (Fifteen centimetre) layer when required into plinth sides of foundation etc.consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed by the Engineer-in-charge within all leads and lifts.

a) Ordinary rock 50% within all leads and lifts as per the direction of Engineer-in-charge.

b) Chiselling/wedging out or rock where blasting is prohibited hard rock 50% within all leads and lifts as per the direction of Engineer-in-charge..

Bailing or pumping out water during excavation in foundation within all leads and lifts as per the direction of Engineer-in-charge.

Boulder filling/stone filling behind the retaining wall including carriage of material within all leads and lifts as per the direction of Engineer-in-charge.

Providing and laying stone pitching on side slopes of gude banks of embankment and protection works within all leads and lifts as per the direction of Engineer-in-charge.

Wire crates of galvanised iron wire filled with boulders with square cut faces against the wire. (Wire crates to be measured and paid for separately) within all leads and lifts as per the direction of Engineer-in-charge.

Wire crates made of galvanised iron wire filled with boulders with square cut faces against the wire. (Boulder filling to be measured and paid for separately)Galvanised iron wire 5 milimetre thick corressponding to SWG-6 (15 centimetre x15 centimetre mesh) within all leads and lifts as per the direction of Engineer-in-charge.

Providing and laying cement in position ready mixed M-10 grade concrete for reinforced cement concrete work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in tansit mixer for all leads having continuous agitated mixer, manufactured a per mix disign of specified grade for reinforced cement concrete work, including pumping of R.M.C. from transit mixer to site of laying, excluding the cost of centring, shuttring finishing and reinforcement, including cost of admixtures in recommended proportions as per IS:9103 to accelerate/retared setting of concrete improve work ability without imparing strength and durability as per direction of the Engineer-in-charge

Providing and laying cement in position ready mixed M-25 grade concrete for reinforced cement concrete work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in tansit mixer for all leads having continuous agitated mixer, manufactured a per mix disign of specified grade for reinforced cement concrete work, including pumping of R.M.C. from transit mixer to site of laying, excluding the cost of centring, shuttring finishing and reinforcement, including cost of admixtures in recommended proportions as per IS:9103 to accelerate/retared setting of concrete. improve work ability without imparing strength and durability as per direction of the Engineer-in-charge.

Providing and laying mild steel/tor steel reinforcement for reinforced cement concrete work including bending binding and placing in position complete upto floor two level within all leads and lifts as per the direction of Engineer-in-charge.

Steel work welded in built up sections,trusses and framed work including cutting,hoisting and fixing in position and applying a priming coat of red lead paint in gratings,framed guard bars,ladders,railing,brackets and similar type of work within all leads and lifts as per the direction of Engineer-in-charge.

Providing form work with steel plates 3.15 milimetre thick welded with angle iron in frame 30x30x5 milimetre so as to give a fair finish including centering,shuttering,strutting and propping etc.with wooden battens ballies,height of propping and centering below supporting floor two ceiling not exceeding 4 metre and removal of the same for in-situ-reinforced concrete and plain concrete work in :-

a) Vertical surfaces such as walls(any thickness)partitions walls and the like including attached pillasters,buttreses plinth string courses and the like within all leads and lifts as per the direction of Engineer-in-charge.

Providing and fixing of cast iron sluice valve of Kirloskar/Kartar/leader/Bir make of following diameter with hand wheel as per IS:14846-2000 (Class PN-1.0) including brass spindal as per 2906-1984 complete with nuts bolts and rubber insertion etc. complete in all respect with in all lead and lift as per satisfaction of Engineer-in-charge. a) 400 milimetre dia

AMIT CHOUDHARY

Vijay Kumar

Hardev Singh Thakur

Sanjay Kumar

AMIT KATOCH