WBPWD/EE/S24PED/eNIT01/21-22

Amount

S &F 1200 mm sweep ,230V, 50Hz, A.C. Ceiling fan with down rod, canopy, blades, including connection by 1.5 sq. mm. P.V.C./Cu wire ( Make-Orient -New Breeze/ Crompton Greaves-Aura primium/smart Breeze -high speed)

S&F 250 V,( 6-10)A per way, SPN MCBDB (2+12) way with SS enclosure double-door(Ivory White with IP-42/43 protection with DP Isolators as incomer and SPMCBs ('C' Curve, 10kA) as outgoing,on the surface of the wall with fastners & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment as per GS. INCOMING-40A DP Isolator OUTGOING 12 Nos. 6-10A SPMCB ( Make :Siemens / Legrand/Havells) ).

Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC)through surface of the wall in 20mm size PVC rigid conduit 'FR' (Precision make) with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board complete with 2 no. suitable size “Ph & N” copper bar with top cover plate making earthing attachment fixed on wall incl. mending good damages to original finish. [only PVC Rigid Conduit on ceiling and remaining portion concealed]( Av Run: 15 Mtr.)

Extra for supplying additional PVC Cu wire and down rod & painting the rod exceeding 30 cm by 2x1.5 sqmm flexible copper wire.

Supply & making ceiling Fan hanging arrangement from Rectangular Beam of existing structure.The MS steel shoud use of thick ness minimum 6mm and width 50-75mm and the lenth is as per site requirement. The MS steel shoud be painted well for resists corrosion. The clamp shoud have flexibility to tightend with the existing Rentangular Beam so that no movement occur during fan running condition. 2 mm to 5 mm rubber mat may be used for proper tightness and absorb vibration. The MS clamp should have Nut bolt arrangement with safety pin at both side .The arrangement should be such as that it can hang a fan with a ceiling fan with out any free fall.

Supply & drawing ( 2×1.5 +1×1.5) sq.mm. P.V.C. copper wire (Make- Approved Make) in incl. connection through precision make conduit pipe on surface of the wall.

Supply & drawing ( 2×6.0 +1×4.0) sq.mm. P.V.C. copper wire( Make- Finolex) in 19 mm. dia. 3mm thick precision make Conduit pipe on surface of wall from PDB to SP BDB incl. connection

Charges for doing hole in gypsum false ceiling and mending good the damages during installing the ceiling fan

Supplying & fixing medium gauge 65mm dia GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required

Note: 1) All the above rates should be quoted inclusive of all taxes & duties, District charges, Riverine charges and LWC as applicable 2) Total is rounded off to the nearest rupees.

MAA TARA ELECTRO ENTERPRISE

MAA TARA ENTERPRISE