Repair and Renovation of Sub Registrar office Tihidi for the year 2025-26

Earth work in excavation in all kinds of soil including hard moorum, stoney earth mixed with boulders except sheet rocks and boulders requiring blasting with all leads and lifts including dressing and levelling the bed and depositing the excavated earth at places away from work site with all leads and lifts including cost of all labour required for the work etc. complete as per specification and direction of the Engineer-In-charge.

Filling with sand well watered and compacted with appropriate rammer or mechanical compactor and top surface dressed and levelled to proper gradient as per direction of the Engineer-in-charge including watering and ramming with cost conveyance, royalities, taxes of all materials and labour with required for the work etc. complete as per specification and direction of the Engineer-In-charge.

Cement concrete of proportion 1:3:6 in foundation using 4cm size black broken granite stone aggregates of approved quality and from approved quarry including hoisting, lowering and laying concrete in layers not exceeding 15cm 6" thick to the required level ramming, watering, curing etc. complete including cost and conveyance royality taxes of all materials and labour with required for the work as per specification and direction of the Engineer-In-charge.

Providing cement concrete 1:2:4 with 12 mm nominal size of hand or crusher broken hand granite stone aggregate of approved quality from approved quarry in foundation up to a depth of 1.5m.below ground level and up to a height of 1.5m above Ground level or Bed level including hoisting, lowering and laying in position in layers not exceeding 150 mm thick with proper packing and ramming to proper slope and level including curing dewatering, shoring, shuttering if necessary at the time of laying concrete with cost,conveyance, royalty,taxes of all materials required for the work, including supplying and working of pumps and all other materials required for the work, including all labour finishing the exposed surface, smooth, providfing grooves and beads where ever necessary etc. complete as per spoecification for Road and Bridge works and direction of Engineer-in-charge.

RCC work of M-20 grade Plinth Bend having a minimum compreshive srength 150kg per cm2 in 150mm cubes at 28 days curing after mixing and test conducted in accordance with I.S 456 and I.S 516 using black hard crusher broken granaite chipsof 20mm and down-grade size not exceeding 25percent of approved quality including hoisting and laying placing in position concrete watering and curing for 28 days including cost of rigid and smooth stool centering and shuttering with C.M plaster 1:2 at no extra cost where necessery and cost, conveyance, royality and taxes of all materials labour required for the work etc. complete but excluding cost of M.S. Rod or Tor steel and binding and tying the grills and placing in position etc.complete. The materials used in the work and finished item of work shall confirm to relevant I.S specification and as per specification and direction of the Engineer-In-charge. The testing charges will be borne by the contractor

Column

Roof slab

Providing HYSD bar reinforcement Fe 415 MS round bars required for R.C.C. works including cost and conveyance of tested M.S. or T.S. rods and binding wire of 18 to20 gauge, including labour charges for straightening , cutting,bending,binding,and welding if required and tying the grills and placing in proper position as required incase of availability of rods in Departmental store,the same can be supplied to the contractor at prevailing stock issue rate of grade S 240 and S 415 confirming to IS 432 and IS 1786 respectively with approved design etc complete as per Specification and direction of Engineer-In - charge.

Fly Ash Brick masonary brick size of 25x12x8cm having crushing srength not less than 75kg per cm2 with dimension tolerance 8percent in C.M. 1:6 in foundation and plinth including cost, conveyance, royalty and taxes of all materials, labour etc. complete including watering and curing for required period as per specification and direction of the Engineer-In-charge.

Fly Ash Brick masonary brick size of 25x12x8 c.m having crushing srength not less than 75kg per cm2 with dimension tolerance 8percent in C.M.1:6 in Superstructure including cost, conveyance, royalty and taxes of all materials, labour etc. complete including watering and curing for required period as per specification and direction of the Engineer-In-charge.

12mm thick cement plaster 1:6 finished smooth to outside surface of brick wall after racking out the joints scraping and cleaning the surface including watering and curing for specified period etc. complete including all cost and conveyance, royalty, taxes of all materials etc.complete as per specification and direction of the Engineer-In-charge.

16mm thick cement plaster 1:6 finished smooth to inside surface of brick wall after racking out the joints scraping and cleaning the surface including watering and curing for specified period etc. complete including all cost and conveyance, royalty, taxes of all materials etc.complete as per specification and direction of the Engineer-In-charge.

12mm thick Cement plaster 1:4 over brickwork with neat Cement punning for skirting including curing including all cost and conveyance, royalty, taxes of all materials etc.complete as per specification and direction of the Engineer-In-charge.

Priming 1-coat with any approved primer including all labour etc complete as per direction of the Engineer-in-charge.

Finishing walls with weather coat two coats over a coat of cement primer to outer wall surface including cost and conveyance of all materials to site, and all labour charges complete as per direction of the Engineer-in-charge.

Providing, fitting, fixing of GCI sheet in roof including drilling hole in wind ties, fixing of ridges wind ties etc. complete as per direction of the Engineer-in-Charge

Providing, Fitting and Fixing M.S. Pipe and angle Including cost and conveyance of all materials to site, and all labour charges etc. complete as per specification and direction of the Engineer-In-charge.

Providing, Fitting and Fixing M.S. Iron angle and shutters for doors and windows Including cost and conveyance of all materials to site, and all labour charges etc. complete as per specification and direction of the Engineer-In-charge.

Providing, Fitting and Fixing PVC for doors of approved quality Including cost and conveyance of all materials to site, and all labour charges etc. complete as per specification and direction of the Engineer-In-charge.

Painting two coats over wood and iron work with approved Enamel paint over a coat of primming, including cost and conveyance of all materials to site, and all labour charges etc. complete as per specification and direction of the Engineer-In-charge.

Fixing vetrified tiles in floors,treads or steps and landing on 25 mm thick bed of c.m. 1:1 jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing completeas per direction of EIC.

Fixing vetrified tile in dados skirting and risers of steps on 12mm thick CP 1:3 jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete as per direction of EIC.

Finishing walls with Acrylic wall putty Cement based Putty and Making smooth to receive painting including cost and conveyance of all materials to site, and all labour charges complete as per direction of the Engineer-in-charge.

Wall painting 2-coats with plastic emulsion paint of approved shade on new work 1coats to give an even shade including cost and conveyance of all materials to site, and all labour charges etc. complete as per specification and direction of the Engineer-In-charge.

Distempering 2-coat to walls with distemper of approved shade on old or new work to give on even shade including cost and conveyance of all materials to site, and all labour charges complete as per direction of the Engineer-in-charge.

Removing Old lime or cement plaster from walls including raking out joints 12 mm deep and removing the debris within 50 m lead as per specification and direction of the Engineer-In-charge. .

Dismantling and removing R.C.C.Chajja,Shelves,Fins and parapet includingstacking the useful material for reuse and removing the debris within 50 meter leadSqm.as per specification and direction of the Engineer-In-charge. .

Dismantling brickwork, stone masonry in Cement mortar under 3meter height including stacking the useful material for reuse and removing the debris within 50 meter lead.as per specification and direction of the Engineer-In-charge. .

Dismantling and removing 2.5 cm AS flooring including stacking of the materials for reuse and removing the debris within 50 meter lead including cost of all labour, TandP etc. complete as directed by the Engineer in Charge.

6mm thick Cement plaster 1:4 to R.C.C.surface finished smooth including closed deep chipping and slurry treatment curing etc. complete as per specification and direction of the Engineer-In-charge.

Providing of 80 mm thick factory made cement concrete interlocking paver block of M-40 grade and approved make,varity colour and size made by block making machine with strong vibratory compection of approved design and shape ,laid in required colour and pattern over 25mm thick compected bed of coarse sand ,filling the joints with fine sand etc,all etc complete as per direction of Engineer- in-charge