SPECIAL REPAIR ROOF SHEET OF BLDGS NO EW 54 EW 53 EW 69 AND EW 70 IN SOUTH COMPLEX AT IMA DEHRADUN

Amount

Dismantling existing timber scantling 40 sqcm and over in section (framed work) in any position complete all as specified and directed.

Taking down cement plaster on brick or stone walling built in CM including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

Brick work with sub class 'B' bricks (old size) straight or curved on plan exc 6.00m mean radius built in CM (1:6) including demolition of brick work/stone masonry built in cement mortar complete all as specified and directed.

Rendering 15mm thick plaster on fair faces of brick work or concrete surface in CM 1:4 finished even and smooth without using extra cement , complete all as specified and directed

Rendering 15mm thick plaster on other than fair faces of brick work or concrete surface in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed.

Rolled structural mild steel work as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates complete all as specified and directed.

2nd class hard as in wooden scantling clean swan in any position as in framed work complete all as specified and directed

4mm thick E-board false ceiling (Classic) including galvanised colour coated snap grid frame for false ceiling, size of grid 605 X 605mm fixed with 1.6 mm dia GI wire suspenders one end tied to roof members and other end connected to main tee of grid framework by means of 4mm dia adjustable "J" hook consisting of two Nos washers and two nuts at 1.2 mtr centres, size of main tee 38mm X 25mmX 1.4mm, cross tee 38 mm X 25 mm X 1.4mm, angle along walls 38 mm X 25mm X 2.0 mm and including taking down existing boards any thickness including cover fillets etc complete all as specified and directed

Pre- painted colour galvalume aluminium Zinc coating GI based corrugated tile profile steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as directed including dismantling existing AC sheet.

Pre- painted colour galvalume aluminium Zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as directed including dismantling existing AC sheet.

Pre- painted colour galvalume aluminium Zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridges fixed with self tapping screws etc complete all as directed including dismantling existing sheet.

2nd class hard wood plain fillets, section exc 6 & n. exc 13 Sq cm, square, rectangular or triangular in section, clean sawn, secured with nails or brads, complete all as specified & directed.

Preparation of new plastered/un-plastered surfaces of wall and applying three coat of white wash on walls complete all as specified and directed.

4mm thick plain cement boards work in ceiling at a height above 3 meter and upto 7.50 mtre, fixed to timber framework with screws incl all necessary arrangements like scafolfing, ladders etc including dismantling of old unserviceable ceiling boards, fillets all complete all as specified and directed.

Preparation of new plastered/cement board/un-plastered surfaces of ceiling and applying three coat of white wash on ceiling complete all as specified and directed.

PCC 1:2:4 type B1 (using 20 mm graded crushed stone aggregate) as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, coping, benching, kneelers, apex stone, bed plates, kerbs, etc. including weathering, slightly rounded or chamfered angles and throating, including necessary from work etc including demolition of existing cement concrete complete all as directed.

Preparation of new plastered surfaces of wall and applying two coats of cement based paint complete all as specified and directed

Preparation of new steel/iron surfaces of any description, over 10 cm in width or girth and applying two coat of synthetic enamel paint with approved shade over a coat of red oxide primer complete all as specified and directed

Preparation of surfaces of wood or wood based material new or old of any description and girth and treated with creosote oil complete all as specified and directed

Aggrawal Builders and Furnishers

DHARAMVIR CONTRACTOR

M/s RAM RATAN AND SONS

Alankar Traders

M/s caspur construction company

Sharda Enterprises

M/S RAJESH KUMAR GOYAL