PROVISION OF APPROACH PATH AND PROTECTION WORKS NEAR P159 A SPECIAL REPAIRS TO BLDG NOP51 K IN PHASE-II RESIDENTIAL AREA ANDPROVISION OF STONE BOULDER PITCHING NEAR ADDITIONAL DSC BLOCK 97 BLOCK AT NAVAL STATION BHEEMUNIPATNAM AND PROVISION OF CHEQU

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by the Engineer-in-Charge.

Taking down cement plaster of any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc built in cement mortar complete all as specified and as directed by the Engineer-in-Charge.

Taking down existing roof treatment including plastering of any description complete all as specified and as directed by the Engineer-in-Charge.

Demolition of mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) complete all as specified and as directed by the Engineer-in-Charge.

Taking down chowkhats or frames with shutters (with out taking off shutter from frame) n. exc 1.5 sq. m each complete all as specified and directed.

Taking down chowkhats or frames with shutters (with out taking off shutter from frame) exc 1.5 sq. m but n exc 4 sq. m each complete all as specified and directed.

Taking down shutters of any description exc. 1 Sq.m. but n. exc. 2 Sq.m. each complete all as specified and as directed by the Engineer-in-Charge.

Taking down shutters of any description exc. 1 Sq.m. but n. exc. 2 Sq.m. each and refixing in the same opening complete all as specified and as directed by the Engineer-in-Charge.

Taking up or down 15mm dia. steel tubing and connections complete all as specified and as directed by the Engineer-in-Charge.

Taking up or down 20mm dia. steel tubing and connections complete all as specified and as directed by the Engineer-in-Charge.

Surface excavation n. exc. 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and as directed by the Engineer-in-Charge.

Excavation over areas, n. exc 1.5 m deep and getting out in any type of soil complete all as specified and as directed by the Engineer-in-Charge.

Excavation in trenches n. exc.1.5m wide and n. exc. 1.5m in depth for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n. exc. 10 Sq.m. on plan and n. exc. 1.5m in depth and getting out in any type of soil complete all as specified and as directed by the Engineer-in-Charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n. exc. 25cm complete all as specified and as directed by the Engineer-in-Charge.

M&L for moorum/red bajri filling in floors or pavings, laid in layers n. exc. 15cm thick, spread, levelled and rammed including watering complete all as specified and as directed by the Engineer-in-Charge.

M&L for crushed stone dust filling blended with coarse sand in 1:1 ratio in floors or pavings, laid in layers n. exc. 15cm thick, spread, levelled and rammed including watering complete all as specified and as directed by the Engineer-in-Charge.

Removing excavated soil to a distance n. exc. 50m and depositing where directed at a level n. exc. 1.5m above the starting point complete all as specified and as directed by the Engineer-in-Charge.

Removing excavated soil to a distance exc. 1.5 Km but n. exc. 5 Km and depositing where directed at a level n. exc. 1.5m above the starting point complete all as specified and as directed by the Engineer-in-Charge.

M&L for hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for PCC 1:4:8 type D2 (Using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed by the Engineer-in-Charge.

M&L for PCC 1:2:4 type B1 (Using 20mm graded stone aggregate) as in footings, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed by the Engineer-in-Charge.

M&L for PCC 1:2:4 type B0 (Using 12.5mm graded granite stone aggregate) in copings, lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed by the Engineer-in-Charge.

M&L for precast PCC 1:2:4 type B1 (Using 20mm graded stone aggregate) in kerb stones, window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin). corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc. and set in cement mortar 1:4 complete with joints to match complete all as specified and as directed by the Engineer-in-Charge.

M&L for RCC 1:2:4 type B1 (Using 20mm graded stone aggregate) as in chajjas and the like complete all as specified and as directed by the Engineer-in-Charge.

M&L for brickwork with fly ash bricks, straight or curved on plan n. exc. 6m mean radius, built in cement mortar 1:6 complete all as specified and directed by the Engineer-in-Charge.

M&L for boulder pitching, laid dry, hand packed tightly & grouted with cement and sand mortar 1:6 complete all as specified and as directed by the Engineer-in-Charge.

M&L for second class hardwood 35mm thick wire cloth/glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (with sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters complete all as specified and directed by the Engineer-in-Charge.

S&F 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides with 6mm thick teak wood beading all round complete all as specified and as directed by the Engineer-in-Charge.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with mild steel square tube in opening as per specification & drawing complete all as specified and as directed by the Engineer-in-Charge.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of mild steel tubes for top & bottom rails with mild steel frame covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, and with panelling of plain colour PVC sheet fitted in the mild steel frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and as directed by the Engineer-in-Charge.

S&F 125mm size stainless steel butt hinges complete all as specified and as directed by the Engineer-in-Charge.

S&F 200mm size aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed by the Engineer-in-Charge.

S&F 150mm long extruded aluminium alloy handles, cast type, anodised complete all as specified and as directed by the Engineer-in-Charge.

S&F 300mm long aluminium alloy, anodised sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed by the Engineer-in-Charge.

S&F 100mm aluminium anodised hasp and staple, safety type, with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed by the Engineer-in-Charge.

S&F continuous (piano) hinges with width of flaps 30mm (when open), mild steel, bright finish or electrogalvanised complete all as specified and as directed by the Engineer-in-Charge.

S&F aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and as directed by the Engineer-in-Charge.

S&F stainless steel pipe 25mm dia. curtain rod for windows, doors opening etc complete all as specified and as directed by the Engineer-in-Charge.

S&F fancy type stainless steel knobs for fixing curtain rod complete all as specified and as directed by the Engineer-in-Charge.

S&F reinforcement TMT steel bars of 6 to 8mm dia., cut to length, bent to shape required including cranking, bending, spirally for hooping, hooking ends and binding with annealed mild steel wire not less than 0.9mm dia. or securing with clips or welded complete all as specified and as directed by the Engineer-in-Charge.

M&L for anodised powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified (minimum thickness of powder coating 50 micron) complete all as specified and as directed by the Engineer-in-Charge.

S&F anodised powder coated aluminium window and ventilator shutters, sliding type without sash bars, aluminium sections including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws and suitable anodised aluminium handles and rollers complete all as specified (minimum thickness of powder coating 50 micron) complete all as specified and as directed by the Engineer-in-Charge.

S&F anodised coloured aluminium grill of design No.DG-117, 10mm thick of DECOGRIL or equivalent make as approved by GE fixed with and including 'F' sections complete all as specified and as directed by the Engineer-in-Charge.

S&F 18mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed to aluminium frame work of doors complete all as specified and as directed by the Engineer-in-Charge.

M&L for APP based polymeric membrane minimum weighing 3 Kg/Sq.m. and minimum 3mm thick reinforced with polyster non wove fabric (weight not less than 150 gms/Sq.m.) laid on primed surface after applying a coat of blown bitumen 85/25 grade @ 1.20 Kg/Sq.m. over bitumen primer @ 0.50 Kg per Sq.m. by forced application, applying another coat of hot blown bitumen 85/25 grade @ 1.20 Kg per Sq.m. over water proofing membrane and applying a coat of solar reflective bituminous aluminium paint @ 0.10 Kg per Sq.m. all as per the manufactureres instructions, complete all as specified and directed by the Engineer-in-Charge.

M&L for cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 complete all as specified and directed by the Engineer-in-Charge.

M&L for 40mm thick PCC 1:3:6 type C1 (Using 20mm graded stone aggregate) as in padding concrete/sub base etc. complete all as specified and as directed by the Engineer-in-Charge.

M&L for 75mm thick PCC 1:3:6 type C1 (Using 20mm graded stone aggregate) as in plinth protection complete all as specified and as directed by the Engineer-in-Charge.

M&L for 75mm thick PCC 1:3:6 type C2 (Using 40mm graded stone aggregate) as in sub base for flooring complete all as specified and as directed by the Engineer- in-Charge.

M&L for 25mm thick PCC 1:2:4 type B1 (Using 20mm graded stone aggregate) as in flooring complete all as specified and as directed by the Engineer- in-Charge.

M&L for non skid/matt finish ceramic tiles 7 to 8mm thick area of each tile exc. 0.11 Sq.m. but n. exc. 0.18 Sq.m. (400x400mm size), in floors etc.set and jointed in neat slurry and pointed in white or coloured cemment to match for joint free over screed bed or bedding layer 15mm thick in CM 1:4 for laying floor finishes complete all as specified and as directed by the Engineer-in-Charge.

M&L for non skid/matt finish ceramic tiles 7 to 8mm thick area of each tile exc. 0.11 Sq.m. but n. exc. 0.18 Sq.m. (400x400mm size), in vertical surface like skirtings dado etc. set and jointed in neat slurry and pointed in white or coloured cemment to match for joint free over backing coat of mortar 10mm thick in CM 1:4 for laying floor finishes complete all as specified and as directed by the Engineer-in-Charge.

M&L for glazed ceramic tiles in vertical surface like skirtings dado etc., of size 250x450x7mm or 300x450x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match for joint free over backing of 10mm thick in CM1:4 on fair faces of brick work or concrete surfaces complete all as specified and directed by the Engineer-in-Charge.

M&L for machine cut Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over a backing coat of 10mm thick in CM 1:4 complete all as specified and as directed by the Engineer-in-Charge.

M&L for chequered designer cement concrete tiles 30cmx30cmx25mm thick, set, jointed and pointed in neat cement slurry in floors with white or grey cement and pigments over 20mm thick screed bed in cement mortar 1:4 complete all as specified and as directed by the Engineer-in-Charge.

M&L for rubber moulded precast conctete interlocking paver blocks any shape and size confirming to IS 15658-2006, 80mm thick, with grey cement and pigment, M-35 Grade, complete all as specified and as directed by the Engineer-in-Charge.

M&L for 18-20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over a screed bed of 20mm thick in cement mortar 1:4 complete all as specified and as directed by the Engineer-in-Charge.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed by the Engineer-in-Charge.

Drilling holes for bolts, pipes (for cooking gas pipe) etc. n. exc. 25mm dia. Granite or trap stone etc. (marble/granite slab of cooking platform) by means of drilling machine complete all as specified and as directed by the Engineer-in-Charge.

M&L for rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed by the Engineer-in-Charge.

M&L rendering 10mm thick on fair faces of ceiling or concrete surfaces in CM 1:4 finished fair and even complete all as specified and as directed by the Engineer-in-Charge.

M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed by the Engineer-in-Charge.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 mixed with water proofing compound as per manufacturer's instructions finishing the surface even and smooth without using extra cement complete all as specified and as directed by the Engineer-in-Charge. Note: WPC will be measured and paid seperately.

M&L rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:3 finished fair and even complete all as specified and as directed by the Engineer-in-Charge.

Supply only Integral Water Proofing Compound (ISI marked) of approved make.

M&L for preparation of new plastered surfaces and applying three coats of white wash on walls complete all as specified and as directed by the Engineer-in-Charge.

M&L for preparation of new plastered surfaces and applying three coats of white wash on ceilings complete all as specified and as directed by the Engineer-in-Charge.

M&L for preparation of new plastered surfaces and applying two coats of oil bound distemper over one coat of primer including 2mm thick wall care putty on walls complete all as specified and as directed by the Engineer-in-Charge.

M&L for complete removal of existing treatment on internal walls and applying two coats of oil bound distemper over one coat of primer including 2mm thick wall care putty on walls complete all as specified and as directed by the Engineer-in-Charge.

M&L for preparation of new plastered surfaces of walls and applying two coats of weather proof exterior emulsion over one coat of primer complete all as specified and as directed by the Engineer-in-Charge.

M&L for preparation of old treated surfaces and applying one coat of weather proof exterior emulsion on external surfaces of walls complete all as specified and as directed by the Engineer-in-Charge.

S&F 4.8mm thick plain sheet glass, ordinary quality and glazing with oil putty in square exc. 0.5 sq.m. in each pane complete all as specified and as directed by the Engineer-in-Charge.

M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed by the Engineer-in-Charge.

M&L preparation of new or previously untreated steel surfaces of any description, n. exc. 10cm in width or girth when unconnected with other painting or when painted in a different tint and applying two coats of synthetic enamel paint over a priming coat of red oxide zinc chrome primer complete all as specified and directed by the Engineer-in-Charge.

S&F 16mm dia. (10mm internal dia.) 3-layer PP-R polypropylene random copolymer pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PPR plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. complete all as specified and as directed by the Engineer-in-Charge.

S&F 25mm dia. (20mm internal dia.) 3-layer PP-R polypropylene random copolymer pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PPR plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. complete all as specified and as directed by the Engineer-in-Charge.

S&F 32mm dia. (25mm internal dia.) 3-layer PP-R polypropylene random copolymer pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PPR plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs, bib taps 15mm dia. fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs, two way bib cock 15mm dia. chromium plated, fancy type of make Jaquar Catlogue No.FON-40041 or equivalent in CERA complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs, 15mm dia. chromium plated stop valves, fancy type, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs, 15mm dia. stop valves, fancy type, chromium plated with long shank and cup (Concealed type), cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs, 15mm dia. chromium plated pillar taps, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and and fixed complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs, health faucet 15mm dia. with one meter long easy flex tube in chromium finish and wall look of make Jaquar Catlogue No.ALD-CHR-565 or equivalent in CERA complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs, 125mm dia. chromium plated brass shower rose with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs, tubular towel rail stainless steel, 20mm dia., 60cm long between flanges complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs, sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mmx460mm bowl size 410mmx 330mmx160mm complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs, vitreous China squatting pan, ‘Orissa’ pattern with PVC P trap, size 580x440mm white, with integral foot rests complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs, wash hand basin of size 550x400 vitreous China (flat back or angle back type) including half pedestal and cutting for and pinning in ends of brackets or erecting stand including supply and fixing of waste coupling, waste pipe etc. complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs, 10 Litres calacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC 32mm dia. and connection to pipes and fixed complete all as specified and as directed by the Engineer-in-Charge.

S&F soap dish, chromium plated brass, of approximate size 160x160x90mm, fixed to plugs with chromium plated brass screws complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs, PVC flexible connections 15mm size with PTMT nuts of length 600mm complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs, PVC flexible connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs, 500 Litres capacity rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) two layered ISI marked hoisted and fixed in position complete all as specified and as directed by the Engineer-in-Charge.

S&F 20mm dia. gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed by the Engineer-in-Charge

S&F 32mm dia. gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed by the Engineer-in-Charge

S&F 20mm dia. ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe (Minimum weight 15mm-142 gms/ 20mm-210 gms/25mm-455 gms/40mm-690 gms) complete all as specified and as directed by the Engineer-in-Charge.

S&F PVC (SWR) pipes 110mm dia. single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed by the Engineer-in-Charge.

S&F PVC (SWR) pipes 75mm dia. single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed by the Engineer-in-Charge.

S&F 110mm dia. PVC (SWR) plain bends any radius complete all as specified and directed by the Engineer-in-Charge.

S&F 75mm dia. PVC (SWR) plain bends any radius complete all as specified and directed by the Engineer-in-Charge.

S&F 110mm dia. PVC (SWR) junction single (Single Y) equal or uneaqual provided with access door complete all as specified and directed by the Engineer-in-Charge.

S&F PVC (SWR) vent cowls 110mm dia. complete all as specified and as directed by the Engineer-in-Charge.

S&F PVC (SWR) vent cowls 75mm dia. complete all as specified and as directed by the Engineer-in-Charge.

S&F PVC (SWR) multi floor trap 75mm dia. outlet with grating including jointing with solvent cement complete all as specified and directed by the Engineer-in-Charge.

Taking down carefully of any type of point wiring light, fans, socket or power complete fitting such as switch ceiling roses, pendent, regulator, sockets etc. for taking schedule of credit and making good disturbed surface of wall, floor etc. complete all as specified and as directed by the Engineer-in-Charge.

Taking down carefully fittings and fixtures/ceiling fittings, bulk head fittings, tube light fittings etc. by unscrewing from wall boards/boxes complete removing meterial to stores for keeping in safe custody for reusing at site and making good matching to the existing colour to the disturbed surface wall/floors etc. complete all as specified and as directed by the Engineer-in-Charge.

M&L for concealed point wiring PVC insulated and unsheathed cable with 2 run of 1.5 Sq.mm. FRLSH copper conductor single core multistranded 1100 Volt grade confirming to IS 694 drawn through PVC conduit of suitable size concealed metal box and 1.5 Sq.mm. earth wire copper insulated wire connected to common earth dolly for one light/fan/bell point controlled by one No. one way switch/bell push or one 3 pin socket out let 5 Amps switch socket controlled by one No. one way switch on independent board complete all as specified and as directed by the Engineer-in-Charge.

All as per item No.107 above but for one light point controlled by two nos. two way switches.

All as per item No.107 above but one 3 pin outlet 05 Amps on the same board.

M&L for concealed point wiring PVC insulated and unsheathed cable with 2 run of 2.5 Sq.mm. FRLSH copper conductor single core multistranded 1100 Volt grade confirming to IS 694 drawn through PVC conduit of suitable size concealed metal box and 2.5 Sq.mm. earth wire copper insulated wire connected to common earth dolly for 15 Amps switch socket complete all as specified and as directed by the Engineer-in-Charge.

M&L for sub main wiring concealed type with two runs of 4 Sq.mm. PVC insulated unsheathed FRLSH copper conductor single core multistranded and one run of insulated copper earth wire 4 Sq.mm. drawn through PVC conduit complete all as specified and as directed by the Engineer-in-Charge. Note: Two/four runs of copper conductor, one/two runs of earth wire and one run of PVC conduit shall be measured as one length.

S&F switch piano flush type single pole one way 5 Amps, 230 Volts, 50 Hz complete all as specified and directed by Engineer-in-Charge.

Fixing only switch piano flush type single pole one way 5 Amps, 230 Volts, 50 Hz complete all as specified and directed by Engineer-in-Charge.

S&F switch piano flush type single pole two way 5 Amps, 230 Volts, 50 Hz complete all as specified and directed by Engineer-in-Charge.

S&F switch socket combination 2 in1 3 pin 5 Amps 240 Volts flush type multi purpose complete all as specified and directed by Engineer-in-Charge.

Fixing only switch socket combination 2 in1 3 pin 5 Amps 240 Volts flush type multi purpose complete all as specified and directed by Engineer-in-Charge.

S&F switch socket combination 2 in 1, 5 pin 5/15 Amp 240 Volts flush type multipurpose complete all as specified and as directed by the Engineer-in-Charge.

S&F bell push switch 5 Amps, flush type, 230 Volts, 50 Hz complete all as specified and as directed by the Engineer-in-Charge.

S&F ding dong bell 5 Amps, flush type, 230 Volts, 50 Hz complete all as specified and as directed by the Engineer-in-Charge.

S&F ceiling rose surface type bakalite 2/3 terminals complete all as specified and as directed by the Engineer-in-Charge.

Fixing only ceiling rose surface type bakalite 2/3 terminals complete all as specified and as directed by the Engineer-in-Charge.

S&F stepped type electronic fan regulator flush type 120 W, 230 Volts, 50 Hz complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs, sheet steel enclosure MCCB DB TPN double door AC supply 415 V 4 way, 200 Amps rated bus bar, vertical type complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs, sheet steel enclosure MCB DB SPN 8 way with 200 Amps rated bus bar horizantal type 230 Volts IP 43 protection with double metal door complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs, MCCB 100 Amps, 25 KA, 4 pole, 415 Volts, 50 Hz with adjustable thermal & adjustable magnatic setting complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs, MCB FP 100 Amps, 415 Volts, 'B' series complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs, MCB DP 40 Amps, 230 Volts, 'B' series complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs, MCB SP 6 to 32 Amps, 230 Volts, 'B' series complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs, indoor LED luminaire decorative batten 10 Watt wall/ceiling mounted box type energy efficient including connecting up the twin core twisted flexble copper conductor cable with suitable size complete all as specified and as directed by the Engineer-in-Charge. Make: Havells Cat. Part No.LHEXBTP7IN1W009 or equivalent make in Philips/Wipro/Crompton

S&F in repairs, indoor LED luminaire decorative batten 20 Watt wall/ceiling mounted box type energy efficient including connecting up the twin core twisted flexble copper conductor cable with suitable size complete all as specified and as directed by the Engineer-in-Charge. Make: Havells Cat. Part No.LHEXACP7IN1W020 or equivalent make in Philips/Wipro/Crompton

S&F in repairs, 10 Watt LED decorative wall/surface mounting polycarbonate body siitable for retrofit LED lamp base B-22, complete all as specified and as directed by the Engineer-in-Charge. Make: Havells CITY 3 model Cat. Part No.LHDL06160099 or equivalent make in Philips/Wipro/ Crompton

S&F in repairs, indoor LED luminaire decorative batten 10 Watt wall/ceiling mounted box type energy efficient including connecting up the twin core twisted flexble copper conductor cable with suitable size complete all as specified and directed. Make: Havells E-Lite LED Pride Plus model Cat. Part No.LHEXBLP7IN1W009 or equivalent make in Philips/Wipro/Crompton

S&F in repairs, LED street light fitting 25 Watt, made up of pressure die cast aluminium housing with high power LED as lighting source and lens embeded PC cover having top opening separate driver compartment with IP 66 protection and impact resistance of IK07 complete all as specified and as directed by the Engineer-in-Charge. Make: Havells Model No.ENDURA PEARL 25 W MP Cat. Part No.ENDURAPEARLSL25WLED757SASYTOPC or as approved by the GE.

S&F exhaust fan 300mm sweep with louvers, 230 volts with double ball bearing connecting up with flexible 3 core 1.5 Sq.mm. copper cable from terminal point to the fan including including provision of hole for fittment of exhaust fancomplete all as specified and as directed by the Engineer-in-Charge.

S&F house service bracket 1.5 mtrs. long GI pipe 40mm dia. medium grade two Nos. 90 degrees bends MS hook and stay or guy complete all as specified and as directed by the Engineer-in-Charge.

Supply only PVC rectangular block for mounting lamp holders with 3 mm thick plastic laminated sheet cover of size 100mmx100mmx50mm deep complete all as specified and diredcted by Engr-in-charge. Make: Sintex/Plasto

M&L for earthing with copper earth plate electrode 60cmx60cmx6mm buried directly in ground vertically to a depth of not less than 2.25m below ground level with the top edge not less than 1.5m below ground level connected to 4mm dia. GI wire as earth lead by means of bolts, nuts and washers including necessary earthwork & excavation, CI cover, watering pipe funnel, PCC pit etc. complete and frame work complete all as shown in electrical plate No.3 of MES Sch ‘A’ Part-I complete all as specified and as directed by the Engineering-in-Charge. Note: The rate deemed to be included earth pit chamber, CI cover etc. and earth wire from earth pit to test point upto 7.5m length.

Taking down and refixing after repairs, ceiling fan of any make/ model and sweep in its original position, connecting and testing complete all as specified and as directed by the Engineer-in-charge.

M&L for cleaning/preparation of surfaces of ceiling fan 1200mm sweep thoroughly and painting with one coat of spray painting using synthetic enamel white paint over the existing paint and stenciling of MES No. with black paint over it complete all as specified and as directed by the Engineer-in-Charge.

M&L for preparation of old wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by the Engineer-in-Charge.

SRIVALLI ENGINEERS

MURALI KRISHNA ASSOCIATES

N V S S K N SIVA PRASAD