Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹11.0 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹11.9 L+₹91,333.40 (8.30%)Rejected-Finance | L2 | Rejected-Finance L2 | |
| 3 | L3₹12.7 L+₹1.7 L (15.9%)Rejected-Finance MUKALEL HOUSE KUMILY | IDUKKI | KERALA | 685501 | L3 | Rejected-Finance L3 |
| Sl No | Description | Qty | Unit | MANSOOR P.A L2 | Jomy Mathew L3 | IRSHAD C.A L1 |
|---|---|---|---|---|---|---|
| 1.00ROFF TRUSS WORK | ||||||
| 1.00 | 10.25.2:Item Shifted to Sub head 14 as item 14.73
Item Shifted to head 14 as item 14.74
Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works | 3,872.69 | kg | 167 ₹6,46,738.73 | 179 ₹6,93,210.97 | 154.42 ₹5,98,020.33 Lowest |
| 1.00 | 12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 473 | sqm | 791 ₹3,74,143 | 845 ₹3,99,685 | 728.87 ₹3,44,755.51 Lowest |
| 1.00 | OD208256/2025-2026:Supplying and fixing 150mm dia rain water gutter semi circular section including
fitting with 32mmx5mm flat sopports at1m intervel etc. complete. | 86 | metre | 504 ₹43,344 | 536 ₹46,096 | 464.26 ₹39,926.36 Lowest |
| 1.00 | 50.18.7.6.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing . This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 50 mm dia 6 Kgf/cm2 - Internal work- Exposed on wall | 40 | metre | 398 ₹15,920 | 426 ₹17,040 | 367.09 ₹14,683.6 Lowest |
| 1.00 | 5.1.3:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 5.76 | cum | 9,366 ₹53,948.16 | 9,963 ₹57,386.88 | 8,623.78 ₹49,672.97 Lowest |
| 1.01 | 5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more | 322.69 | kilogram | 105 ₹33,882.24 | 112 ₹36,141.06 | 97.31 ₹31,400.77 Lowest |
| 2.00MASONRY WALL RESTORATION | ||||||
| 2.00 | 15.7.3:Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In lime mortar | 1.82 | cum | 827 ₹1,505.14 | 880 ₹1,601.6 | 761.87 ₹1,386.6 Lowest |
| 2.00 | 5.1.3:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 0.63 | cum | 9,366 ₹5,900.58 | 9,963 ₹6,276.69 | 8,623.78 ₹5,432.98 Lowest |
Tender Value
₹12.7 L
EMD Value
₹31,772
Closing Date
26 Sept 2025, 2:00 pmClosed
AE Erattupetta Municipality
O/o The AE Erattupetta Municipality
Annual Plan-Erattupetta Municipality Project No 184/25-26-Govt HSS Building Maintenance- Ward 22 - (15L)
2025_LSGD_798272_12
E2-2508771/25
Open Tender
Civil Works - Roads
Percentage
180 days
Erattupetta Municipality
Please refer Tender documents.
10 documents required · 10 mandatory
₹2,760
Yes
₹31,772
Yes
16 May 2026
18 Sept 2025
27 Sept 2025
18 Sept 2025
26 Sept 2025
18 Sept 2025
Amount
ROFF TRUSS WORK
10.25.2:Item Shifted to Sub head 14 as item 14.73 Item Shifted to head 14 as item 14.74 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
OD208256/2025-2026:Supplying and fixing 150mm dia rain water gutter semi circular section including fitting with 32mmx5mm flat sopports at1m intervel etc. complete.
50.18.7.6.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing . This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 50 mm dia 6 Kgf/cm2 - Internal work- Exposed on wall
5.1.3:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more
MASONRY WALL RESTORATION
15.7.3:Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In lime mortar
5.1.3:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
50.6.1.4:Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand ) etc complete
5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more
13.4.2:12 mm cement plaster of mix:1:6 ( 1 cement : 6 coarse sand)
MANSOOR P.A (BID ID -2359376)
Jomy Mathew (BID ID -2359893)
Bidder Name
Jomy Mathew
IRSHAD C.A
MANSOOR P.A
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.68 MB
TenderDoc.pdf
Tender Documents • 3.13 MB
184sbd.pdf
Other Document • 2.11 MB
BOQ_1324085.xls
BOQ • 0.31 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .