Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.4 LAccepted-AOC PMC 24 528 GROUND FLOOR NEAR PAYYANUR SERVICE CO OP BANK KOTTY BRANCH PAYANNUR KANNUR KERALA 670307 | PAYYANUR | KANNUR | KERALA | 670307 | L1 | Accepted-AOC Being lowest | |
| 2 | L2₹35.4 L+₹1.7 L (5.00%)Rejected-Finance DOOR NO 3 79 CHENNNADGRAMAPANCHAYAT PERUMBALA KASARAGOD 681317 | PERUMBALA | KASARAGOD | KERALA | 681317 | L2 | Rejected-Finance Not being lowest | |
| 3 | L3₹35.5 L+₹1.8 L (5.25%)Rejected-Finance BLDG NO XI 74 NEAR VALLARAM KULLANGARA TEMPLE KUNHIMANGALAM KOVVAPPURAM PO KANNUR DIST KERALA 670309 | KANNUR | KERALA | 670309 | L3 | Rejected-Finance Not being lowest | |
| 4 | L4₹35.5 L+₹1.8 L (5.29%)Rejected-Finance | L4 | Rejected-Finance Not being lowest | |
| 5 | L5₹36.3 L+₹2.6 L (7.63%)Rejected-Finance FIRST FLOOR CREATIVE TOWER EROOR POST VYTTILA ERNAKULAM PIN 682 306 | ERNAKULAM | ERNAKULAM | KERALA | 682306 | L5 | Rejected-Finance Not being lowest |
Tender Value
₹39.8 L
EMD Value
₹79,600
Closing Date
28 Dec 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE(MAINT)EZHIMALA
GARRISON ENGINEER (MAINT) MILITARY ENGINEER SERVICES INDIAN NAVAL ACADEMY POST KANNUR DIST KERALA 670 310
AS PER BOQ AND TENDER DOCUMENTS
2023_MES_630795_1
GE MAINT EZHIMALA 8613
Open Tender
Civil Works
Item Rate
180 days
EZHIMALA
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE MAINT EZHIMALA
₹79,600
Yes
16 Jan 2024
2 Dec 2023
30 Dec 2023
2 Dec 2023
28 Dec 2023
16 Dec 2023
4 Dec 2023 - 11 Dec 2023
Amount
Notes:- (i) The scope of work is to be carried out from ground level to nearly upto 20 metres of height. (ii) Quoted rates are included for scaffolding/crane as required. Contractors should arrange necessary scaffolding/boomlift/crane and takes all safety precautions for workers at the time of carrying out works as described in Sch 'A'/ BOQ. (iii) Contractor should visit the site before quoting the tender to assess the resources required to execute the work at the site. (iv) Cost of all factors are deemed to be included in the rate quoted in BOQ. No extra claim will be entertained.
S&F steel work in tubular trusses including special shaped washers etc. complete using ERW or induction butt welded tubes conforming to IS 4923-1968 Grade St-240 for square or rectangular tube complete all as specified and as directed.
S&F plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted (anchor fastener) or welded attachment (Fe-410W, Gde E-165, Qlty-A) including necessary cutting in wall complete all as specified and as directed.
S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding one side inserted to wall and other fixed with self tapping screws complete all as specified and as directed by Engr-in-Charge.
S&F pre-painted galvalume aluminum zinc coating GI based corrugated/ tile pattern steel sheet 0.50mm thick of any colour (matching to existing ) having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engineer-in-Charge.
M&L for cutting channels, grooves or rebates n exc 15cm girth, and trimming surface for plane sheet complete all as specified and as directed.
M&L for preparation of old decorated surfaces and applying one coat of sandtex matt finish on wall complete all as specified and as per manufacturer's instructions.
M&L for preparation of new steel surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.
Supplying and laying of 25 mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed.
S&F angular stop valve, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, chromium plated, fancy type, screwed both ends for iron pipe or for union and fixed, suitable for 15 mm bore pipe complete all as specified and as directed.
S&F pillar taps 15 mm size, cast copper alloy, chromium plated screwed down high pressure screwed for iron pipe & fixed complete all as specified and as directed.
M&L for glazed ceramic coloured tiles 350x250x7mm / 450x300x 7mm thick in vertical surfaces of stone/brick wall, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick backing coat plaster in CM 1:4 complete all as specified and as directed.
S&F vitreous china wash basin, coloured (flat back) 500x450mm excluding pillar tap, but including fixing brackets, cutting for and pinning in ends of brackets complete all as specified and as directed.
S&F 32mm dia PVC flexible waste pipe for urinals/WHB/sink etc complete all as specified and as directed.
S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.
S&F cast copper alloy, chromium plated waste coupling with long shank, half thread, 32 mm dia, for WHB etc. complete all as specified and as directed.
S&F PVC (SWR) pipes of 75mm dia single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.
S&F PVC (SWR) bends any radius of bore 75mm complete all as specified and as directed.
S&F brass chromium plated towel ring complete all as specified and as directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.
S&F high quality galvanized steel tubular sections having a galvanized coating thickness of 360 GSM of pure zinc of any size and any thickness including special shaped washers complete using ERW or induction butt welding for structural applications as in handrails, grills, roof structure etc conforming to IS:4736-1986 complete all as specified and as directed.
M&L for plates (plain or chequered) Fe -290 (Gde E- 165) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment with riveted, bolted or welded attachment complete all as specified and as directed.
S&F mild steel screw bolts(machine made) 10 mm dia with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 5cm but n exc 10cm long complete all as specified and as directed.
M&L for 2 coats of epoxy coated anti corrosive paint after a coat of epoxy primer over new or untreated steel surfaces complete all as directed by Engineer in Charge.
M&L for 2 coats of epoxy coated anti corrosive paint after a coat of epoxy primer incl complete removal of existing treatment of steel surfaces complete all as directed by Engineer in Charge.
M&L for rendering 15mm thick in CM 1:4 on fair faces of stone surfaces finished even and smooth without using extra cement in external surfaces complete all as specified and as directed.
M&L for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces/ old surfaces complete all as specified and as directed.
KDR CONSTRUCTION
RS ENTERPRISES
M/s K V Ramachandran
CREATIVE BUILDERS
SANDR
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .